Question about 2000 Toyota 4Runner

1 Answer

Clock light is out

The clock light is out. Do I need to change a fuse or actually take apart the whole dash?

Posted by on

  • 4 more comments 
  • drinkardd Dec 04, 2008

    I have the same problem, does anyone know of the fix.

  • Anonymous Dec 07, 2008

    the clock in my 2000 4runner keeps acurate time but I cannot see the numbers unless I tap the area it is mounted then it lights up, what causes this and how can I correct?

  • Anonymous Dec 16, 2008

    99 4Runner Limited. Same problem. Clock keeps good time, but in order to see it, I have to tap/hit the housing for the time to appear!! Sometimes it will appear and sometimes it will not.

  • Anonymous Dec 16, 2008

    1999 4Runner. Clock keeps good time, but I can not see it. Have to tap/hit the housing for it to appear.

  • dhill41 Jan 20, 2009

    My problem is same as others whose clock in intermittently on and off. When tapped and it comes on it usally has the correct time. How do I access the clock to remove and replace it?

  • Toyota Ed May 11, 2010

    Does the clock keep time? Please advise.

×

1 Answer

No, the light is totally out. The little light bulb that is connected to the stereo is out. I was wondering the best way to take the dash off. I don't have a manual and I was wondering where that light bulb is connected to and the best way to approach it?
Thanks

Posted on Nov 04, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My clock light is no shining, the rest of the panel is fine.


you have 2 choices
1; SEE FUSE LAbled, clock
2: if no such label buy and read the factory service manual?
3: or like we do , use a volt meter on all fuses, 1 by one keyon. 12v on both sides is good, (Brainless but 100% effective)! need a video?
have it. with ASE school.
my guess is the clock backlight is dead. right>? backlighting
aka. park/dim lights.l
this can be a bad lamp in the clock, the clock actual fuse is hot all the times.
the backlight lamp is from the dash park dimmer controller.
so if all others dim and 1 dont, that means the actual lamp is bad.
so now you ask one more question. how to change out a lamp.
that is covered in step 2 above, read the manual. or RTM,
I dont post full manuals, yet.
i cant past the whole cluster out , sections here, sorry

if in usa, (not one post ever tells country, and sux big time for helpers)
is alldata.com. USA cars. covers this. read the cluster service sections or where ever your clock resides, (not stated)
as you know, most cars have radio clock, and is a totally differ, answer. to that. (unstated by you) cars world wide have different options for clocks and radios and sometimes 5 or more radios. +++
posting a photo would solve that.?
here is the official toyota book, and again this is USA site!!!
http://www.helminc.com/helm/search_service_owner.asp?Style=helm&class_2=TOY

my car has VFD display and if dead, $1000 for new one
so your cheap 10cent lamp is really a blessing, of old school tech.

Jan 07, 2015 | 2002 Toyota Sequoia

1 Answer

Clock light not working on Suzuki Grand Vitara 2005


the dash dimmer turned down? i guess you mean parking lights and dash dimmer, is dead in clock. but is it dead in the whole dash?
if the dash is dimming and the clock dim lamp is dead (park) then its bad. (check fuses in all cases first)

Nov 03, 2013 | 2005 Suzuki Grand Vitara

2 Answers

No dash lights


there are actually 2 fuses that affect dash lights, the tail light fuse, and the dash light fuse,

Jul 24, 2012 | 1998 Ford Taurus

1 Answer

Hyundai accent 2001 dash clock doesnt work


I HAVE THE SAME CAR AT THE MOMENT I HAVE MY DASH APART TO GET TO RMY RADIO THERE IS NO IN LINE FUSE ON HARNESS TO CLOCK RADIO. IF YYOU DONT HAVE A WORK SHOP MANUAL TO RETREIVE WIRING DIAGRAM AND SOMEONE THAT CAN READ THE CCT THEN YOUR OUT OF LUCK.
TAKE IT TO YOUR AUTO SPARK IT WILL BE CHEAPER THAN DEALER. YOU CAN OBTAIN INSTRUCTION TO REMOVE CONSOLE BY TYPEING YOUR MODLE AND CAR ON U TUBE AND YOU WILL FIND A GUY TELLING YOU HOW TO REMOVE CENTER CONSOLE PROCEDURE THATS WHAT I DID. GOOD LUCK.

Apr 30, 2012 | 2001 Hyundai Accent

1 Answer

Interior overhead light burned out. how do I remove the bulb and replace/car has sun roof/ light on clock is also burned out


If that clock is digital read out lights you might have to replace whole clock if not you will have to take dash apart to get to it,Overhead should have visable screws to take out to release lite cover,

Mar 11, 2011 | 2004 Lincoln Town Car

1 Answer

Clock light on dash has no fuse??? cannot locate


Just pop off the little storage compartment housing the clock, use a butter knife or thin screwdriver and start at the front edges. It should pop up with a little pressure. From there you can pull out the whole assembly and access the clock.

Subaru part number 85068SA020. It lists for $6

Sylvania bulb part #2723

Oct 27, 2010 | 2005 Subaru Forester

1 Answer

Turn signal and hazzards fail to work, brake lights, tail lights work,but when you apply the turn signal or hazzards lights go out


It sounds like your turn signal fuse might have gone out. It's not just a simple fuse to pull in the 96 Blazer. You actually have to take the lower half of the dash apart to get to it. It takes about 15 minutes in all to do. It's a round fuse right below your stereo almost. Here are a couple of links that I hope might help you!

http://en.allexperts.com/q/Chevrolet-Repair-808/Turn-Signal-1996-Chevy.htm

http://wiki.answers.com/Q/Where_is_the_turn_signal_relay_on_the_1996_Chevrolet_Blazer_S-10

The simplest way put, go to your local auto parts store and tell them you need a turn signal RELAY. It's the round relay. Then once you have that, go home and take apart your whole dash (you'll know what to look for since you already bought it) and replace it. It all should would after that! Best of luck to you!

Aug 09, 2010 | 1996 Chevrolet Blazer

2 Answers

Dashboard lights wont come on


you could have fried a wire take a es ligh and pull the dash apart and test were the balbs go in oher wise check check the balbs they could have went out

Apr 17, 2009 | 2000 Hyundai Accent

1 Answer

Dash lights and lights on warning noise gone


IT SOUNDS TO ME AS IF IT COULD BE THE ACTUAL STALK, IT IS VERY COMMON ON THESE VANS

Feb 04, 2009 | 1998 Ford Escort

1 Answer

Lights not working well


mine does it too i think they all do after time it's actually a non-replacable bulb. you have to replace the whole cluster once you pull the the dash apart its one plug and four screws. or you can knock on it in the area where it tells you the gears and miles and it will light up (like your knocking on a door)

Sep 14, 2008 | 1999 Buick Century

Not finding what you are looking for?
2000 Toyota 4Runner Logo

Related Topics:

394 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...