Question about Chrysler Voyager

1 Answer

Grand voyager engin cut out then when i started it again the gears move but i have no movement on led on the dashboard & when it is in gear the car won't move

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 61,037 Answers

You are not going to solve this kind of problem here, take it to a dealer for diagnosis.

FixYa.com claims they have factory repair manuals, they have nothing of the sort, this is not to say some experts may have manuals, we do, but we work from home and in most cases have a small library. Experts are not employed by FixYa.com, we help free of charge as much as we can with the general automotive knowledge we have learned while working as auto technicians, specific test values, repair procedures and illustrations are unique to each car line, these are not in most cases available to us. Thanks for using FixYa!

Posted on Nov 03, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1997 Isuzu hombre NO movement when into gear, left IT in first gear let UP off the clutch and the truck didn't jump or CUT off. . What's wrong with it?


MT trans. got it. (said clutch let up.. is the clue)
engine is running right? (sorry)
and you shift to all gears, and car does not move, RIGHT?

if the clutch slips and car will not move in ALL gears.
the clutch is bad, or if a cable clutch, never setting free play on cable is the cause,... done 100s.
or if hydraulic actuated clutch pedal (im too lazy to look)
then if it fails the car can only moved if you start engine in gear.
see?
please post all steps.
i get in car,
i start engine in neutral. (did you) or start in gear with clutch to floor.?
i then select all gears, and release clutch and car will not move.
like that.... and win. (i can diagnose any clutch, ive wrecked many racing, so.... see all horrors) and fixed them by self. all.

if you can only move car , starting engine in gear.?
that is bad clutch cable or actuator (slave or master cylinder)

is the clutch locked all times, or slips all the time.
see? only that need be said.
and 10 other symptoms. (chatters, noises, grabs, etc)

Apr 17, 2015 | 1997 Isuzu Hombre

1 Answer

98 voyager 3.3 auto trans wont chande gears --seems to be staying in second gear --- hard to move from standstill --- engine temp light came on --- once transmission cools down it works ok til gets h


If you have been driving it, with it over heating as well as
low on fluid your pretty much done & will need a rebuild

If you just drove 10 miles-- then possibly you could have it
diagnosed & find a less costly solution- such as bad solenoids,
but I doubt it

Dec 12, 2012 | 1998 Chrysler Town & Country

1 Answer

Transmission go's out of gear when I stop


Sounds to me like a shift solenoid is sticking.

Jul 21, 2012 | 1998 Plymouth Grand Voyager

1 Answer

I have Chrysler Grand voyager, Model 2000, I am having problem with the gear while driving locally at 20km-40km/hr, and after 20-30 minutes, the gear starts slipping and the car is moving with difficulty,...


Engine is difficult to start when cold
  1. Check the battery condition, battery state of charge and starter motor current draw. Replace the battery if marginal and the starter motor if the current draw is beyond specification.
  2. Check the battery cable condition. Clean the battery terminals and replace corroded or damaged cables.
  3. Check the fuel system for proper operation. A fuel pump with insufficient fuel pressure or clogged injectors should be replaced.
  4. Check the engine's tune-up status. Note the tune-up specifications and check for items such as severely worn spark plugs; adjust or replace as needed. On vehicles with manually adjusted valve clearances, check for tight valves and adjust to specification.
  5. Check for a failed coolant temperature sensor, and replace if out of specification.
  6. heck the operation of the engine management systems for fuel and ignition; repair or replace failed components as necessary.
Engine is difficult to start when hot
  1. Check the air filter and air intake system. Replace the air filter if it is dirty or contaminated. Check the fresh air intake system for restrictions or blockage.
  2. Check for loose or deteriorated engine grounds and clean, tighten or replace as needed.
  3. Check for needed maintenance. Inspect tune-up and service related items such as spark plugs and engine oil condition, and check the operation of the engine fuel and ignition management system.

May 10, 2011 | 2000 Chrysler Grand Voyager

2 Answers

1999 Grand Voyager transmission not shifting into high gear


Do yourself a favor & get it scanned at transmission shop, or dealer & fixed as needed,(within reason) . Delaying it could cost lots of money. A rebuilt is about $1500-$2000.

May 27, 2009 | 1999 Plymouth Grand Voyager

1 Answer

98 PLYMOUTH GRAND VOYAGER WONT START - BLOWS ENG FUSE - HELP


You have a shorted engine harness, this is not common but it does happen, heat and engine movement cause damage to the harness, this is most common on hi miler cars and vans, the only way to fix it is to start by looking anywhere the harness rubs, that is where the damage occurs.

Oct 15, 2008 | 1998 Plymouth Grand Voyager

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...