P2441 error code

There were a lot of vehicles made in 2008!

year make model in all question please. In that order and the first three words to the question.

Code P2441 is an indication that the air injection system switching valve is not working or a sensor problem that will cause no drive symptoms. The exhaust emissions will be affected and will cause the vehicle to fail emission testing. There may also be exhaust leaks that would cause the code to be present.

P2441 OBD-II Trouble Code: Secondary Air Injection System ...

..

Secondary Air Induction System Switching Valve Stuck Closed.
P2441 Bank 1
P2445 Bank 2

Is your vehicle still under the Emission warranty?? I believe it is 7yr/70,000 miles

That code indicates a problem with the secondary air injection valve.
On the Tundra, it is under the intake manifold. Its location on the Tacoma will depend on whether you have the 2.7 or 4.0.
It was quoted as a $750 job on a Tundra, user did it himself for about $300 in parts.

P2441 and P2243 both mean Secondary Air Injection System Switching Valve Stuck Closed.
___________
vas 5054a with bluetooth

As per your problem,the check engine light comes on due to technical problems in your car.In this case i suggest you to click the link below :----Check Engine Light On car? http://schematicsdiagram.blogspot.com/2011/06/check-engine-light-on-car.html
------------Basically the computer needs to be scanned to retrieve the error codes stored in ECM.In this issue,i suggest you to click this link:----How to Read Codes from Check Engine Light? http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html----------After scan procedure you will get P4 digit error codes.If suppose you get this error codes,then click the link below,to know more about error codes:----

Check engine light with codes P2195 and P2197?http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html
---------------There are many other reasons to for check engine light coming ON,i suggest you to click this link below and go through its troubleshooting procedure:---------Car jerks while going uphill and Check engine light is ON?http://schematicsdiagram.blogspot.com/2011/12/car-jerks-while-going-uphill-and-check.html
--------One more reason is as follows :----After getting car washed, check engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure?

http://schematicsdiagram.blogspot.com/2011/12/after-getting-car-washedcheck-engine.html

---------

After replacing throttle body the Check engine light starts blinking?http://technoanswers.blogspot.com/2012/01/after-replacing-throttle-body-check.html

---------

This will help.Thanks.

As per your problem,the check engine light comes on due to technical problems in your car.In this case i suggest you to click the link below :----Check Engine Light On car? http://schematicsdiagram.blogspot.com/2011/06/check-engine-light-on-car.html
------------Basically the computer needs to be scanned to retrieve the error codes stored in ECM.In this issue,i suggest you to click this link:----How to Read Codes from Check Engine Light? http://schematicsdiagram.blogspot.com/2011/12/how-to-read-codes-from-check-engine.html----------After scan procedure you will get P4 digit error codes.If suppose you get this error codes,then click the link below,to know more about error codes:----

Check engine light with codes P2195 and P2197? http://howtobyme.blogspot.in/2012/01/check-engine-light-with-codes-p2195-and.html
---------------There are many other reasons to for check engine light coming ON,i suggest you to click this link below and go through its troubleshooting procedure:---------Car jerks while going uphill and Check engine light is ON? http://schematicsdiagram.blogspot.com/2011/12/car-jerks-while-going-uphill-and-check.html
--------One more reason is as follows :----After getting car washed, check engine light is ON and key less entry not working, tried reprogramming. Also car shows fuel pressure?

http://schematicsdiagram.blogspot.com/2011/12/after-getting-car-washedcheck-engine.html

---------

After replacing throttle body the Check engine light starts blinking? http://technoanswers.blogspot.com/2012/01/after-replacing-throttle-body-check.html

---------

This details will help you.Thanks.

The check engine light comes ON when the cars computer (the ECU) notices any kind of electrical problem in car. In this case I suggest you to get your car scanned at autozone service center. It's absolutely free. In scanning the error codes will be retrieved.As per the error code you can check which part is faulty and replace that particular part. This will solve the problem.---------- This will help. Thanks. Helpmech.

P2441 means "Air injection system switching valve stuck closed"
(bank 1). I don't have a clue as to what they mean by that, sorry.