Question about Honda Civic

1 Answer

How to install a kill-switch into the ignition system

Posted by on

  • Loringh
    Loringh May 11, 2010

    There are basically 2 kinds of "kill" switches. One would be automatic like the kill switch on my riding mower that stops the engine if the mower is in gear and and you try to get off the machine. The 2nd type is like a key switch that would prohibit someone from using my car unless the switch was turned on.

    which type would want




1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert whose answer got voted for 20 times.

  • Expert
  • 150 Answers

You can install a simple battery disconnect right at the battery negative terminal.

Posted on Nov 03, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to wire a universal kill switch into the ignition wiring.

Google search ' how to install a master kill switch ' and watch the results roll in.

Mar 09, 2015 | Cars & Trucks

1 Answer

How do i install handlebar mounted kill switch in a chinese 72cc atc

replace the key switch as it is faulty
as to fitting a kill switch find a switch that the mount opens up so that the switch can be mounted without the necessity to remove anything off the handle bars take a wire from the key switch and run it to the kill switch and from the other terminal reconnect it to where it came from. This means that the power from the ignition switch now goes to the kill switch then back to where it was originally connected after the igition switch.

Feb 07, 2015 | Cars & Trucks

2 Answers

Does a 2000 cavalier have a starter kill switch ?

no it shouldn't have a starter kill switch per say, however it does have a passkey security system that effects the fuel pump operation. as far as the starter goes, you should check ALL fuses and check the starter relay for being faulty. If all fuses and the relay checks good then I would go back to the ignition switch. maybe get a test light and check at the starter for 12 volts while someone tries to start the engine.

May 27, 2014 | 1999 Chevrolet Cavalier

1 Answer

Car security kill switch

Easy. snip and strip one wire in the ignition, install small switch between the ends. Hide switch for your access only. (under the steering wheel or something) Simply disable ignition when you get out of the car and the key won't be able to start it.

Jun 07, 2013 | Buick Regal Cars & Trucks

1 Answer

How do you install a kill switch on a honda accord 96'?

I would not recommend messing with any electrical in your car if you don't know what your doing.
It would require you to splice open your ignition power cord. connect into a ground with a kill switch. so whenever your kill switch is active no power is running to your ignition. thus no start.

Feb 07, 2013 | Cars & Trucks

1 Answer

Manual kill switch

are you refering to an auto start? if you want to install a kill switch all you have to do is go to your stearing collum, of course your going to take the pannles off, find the big red wire thats main ignition to the switch cut and splice a toggle or a axilary key switch in line that will allw you to kill power to the ignition sutting down the rig hope it was helpfull but still need more info on what your asking

Jul 23, 2012 | Cars & Trucks

3 Answers


When you removed the alarm unit you cut the line to the Starter kill switch that was installed. Remove the starter kill switch which is most likely located under the dash spliced into the ignition wiring harness.

Jul 08, 2011 | 1999 Dodge Intrepid

2 Answers

Truck will not crank. Previous owner installed crappy kill switch that initially started the problem.I by pass it and truck was running fine. Till the a ground cable came loose on the battery. There's...

It would be the ignition or those ignition wires because of the kill switch being poorly installed, id try tracing wires first and replace anything thats been cut/spliced into. if not change the ignition

May 12, 2011 | 1992 Toyota Pickup

1 Answer

How do i go about putting a 12 volt toggle switch (kill switch) in my 2003 monte carlo

2003 Monte Carlo comes equipped from the factory with an ignition switch and an antitheft system. Why do you want to install a "Kill Switch"?

Jan 23, 2011 | 2003 Chevrolet Monte Carlo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

1,142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

77932 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides