Question about 1989 Subaru RX

1 Answer

Subaru 92 leggy gearbox wont come out help !!!

I have a subaru legacy 1992 gt turbo
im am trying to get the gearbox out but it seems to be stuck
i have undone all the bolts and tha gearbox mount it shoud just slide out but it wont

anybody got addvise

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Behind the starter motor is a allen key bolt undo that and there is a shaft that holds clutch fork in place pull that out and should fix your problem.........hope this helps

Posted on Dec 13, 2013

6 Suggested Answers

jeffbvegas1
  • 520 Answers

SOURCE: 92 subaru legacy wagon engine surges while

pay close attention to the fuel filter as this is a common symptom and sign of blockage and poor fuel delivery....replace fuel filter

Posted on Sep 18, 2009

  • 1 Answer

SOURCE: intercooler removal diagram on subaru 1995 tt ej20 bg5

If your havinf any trouble I suggest you can pick up a repair manual from any part store and if you feel like spending around $26 you can get alldata online for you car for a year I just did it for some wiring diagrams and it helped me out bigtime good luck

Posted on Mar 27, 2009

cbcs2008
  • 46 Answers

SOURCE: 92 Subaru Legacy Power Windows Don't Work

check the fuse

Posted on Jan 17, 2009

  • 1 Answer

SOURCE: legacy gt 92 single turbo clutch adjustment

Only clutch adjustment is at the pedal as they are hydraulic. Clutch may be worn, cheers

Posted on Aug 01, 2008

Nzero
  • 78 Answers

SOURCE: LEGACY 2.5 AUTO GEARBOX REPLACEMENT

hi there, needs to be the same number. computers need to match. tourque converters are different from 2.0/2.2 to the 2.5 engines. also shift points are different between models so needs to talk to the dash perfectly. hope this helps.

Posted on Sep 01, 2008

germcelchar
  • 389 Answers

SOURCE: how do i bleed my power steering rack on subaru legacy rs turbo

A power steering dosent need bleeding. If you replaced it a week ago and was fine until now then it's not an air problem. Power steering fluid is pumped through the system even when the steering is not being used. Definatly not an airlock problem. Cheer's

Posted on Oct 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi jst brought 2nd hand 92 legacy and it wnt go into gear?


yep transmission big bucks, but have it checked out.

Sep 29, 2012 | 1992 Subaru Legacy

1 Answer

I have a 92 legacy sedan with bad motor. Bought a 92 legacy wagon turbo. Do I have to change wire harness in front with computor, or can I change just computor?


hi im presuming your old car is non turbo if so you will have to change a lot of parts over to make it work, you will have to replace entire engine loom, the ecu will need changed over then the fuel pump and all of the fuel lines will need to be replaced with the bigger turbo model ones to keep up also the trans will bolt strait up but will be the major weak point so swap over if possible.

Jun 15, 2011 | 1992 Subaru Legacy

1 Answer

Subaru legacy 1991 awd gt overheating


you might want to check your t-stat see if thats clogged or stuck.

Dec 01, 2009 | 1992 Subaru Legacy

1 Answer

92 subaru legacy wagon engine surges while


pay close attention to the fuel filter as this is a common symptom and sign of blockage and poor fuel delivery....replace fuel filter

Sep 15, 2009 | 1992 Subaru Legacy

1 Answer

Like to know how to set timing on a 92 suberu. all


The '92 Subaru Legacy uses a distributorless ignition system. No adjustment is possible/necessary. The computer adjusts the timing continuously.

You can check the timing if you have a timing light. The spec for engines with a turbo charger is 15 degrees plus or minus 8 degrees at 700 RPM. Non-turbo engines are 20 degrees plus or minus 8 degrees at 700 RPM.

Jul 19, 2009 | 1992 Subaru Legacy

1 Answer

No power, idling rough


Replace the catalytic converter and EGR valve

Jun 03, 2009 | 1991 Subaru Legacy

3 Answers

92 Subaru Legacy Power Windows Don't Work


I have a 92 that did the same. After checking fuses and the relay(located under drivers seat) I discovered that the power windows control module on drivers door was bad. Went to a salvage and bought a used for $40, pulled the door panel, unscrewed and unplugged the old one, put in the used one and everything worked fine. About a week later, the passenger side motor went out and replaced that with a used power window motor. All windows now work fine.

Jan 17, 2009 | 1992 Subaru Legacy

1 Answer

Legacy gt 92 single turbo clutch adjustment


Only clutch adjustment is at the pedal as they are hydraulic. Clutch may be worn, cheers

Aug 01, 2008 | 1992 Subaru Legacy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

151 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...