Question about 1997 BMW 328

1 Answer

Computer not illuminated? 328i coupe

Please could someone advise me if the computer is meant to be lit all the time on the 328i coupe, also I dont have a manual for the car does anyone know of a site where you can download one free?

Posted by on

1 Answer

Hi, the on-board computer can be clipped out by sliding a credit card through the top of the unit, then putting your finger underneath the unit (inside the small console) and pressing the release clip. there are 3-4 small globes which can easily be found at most electrical shops.

Posted on Nov 06, 2008

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Its take a long time to take drive

i would have the OBD codes read as could point to the cause , all so have the trans fluid checked for level and quality

May 18, 2016 | 2010 Hyundai Genesis Coupe

1 Answer

The door ajar light flashes and dings for both doors when driving.

There are sensors inside the doors attached to the door latch, they are defective and causing this issue.

Feb 04, 2016 | 2010 BMW 328i Coupe

1 Answer

My 2007 bmw 328i coupe is flashing codes p143e and p143 and p0491 what do they mean?

Ok the p143 or 143e code is 02 censors ! Located on the exhaust pipe . And on BMW Is got to cost some $$$$.the p0491 Is the air intake control censer! Should be located somewhere next to the air cleaner. Hope this helps and good luck !!

Apr 16, 2015 | 2007 BMW 3 Series 328i

1 Answer


You can not clear codes or have them stay away,
until you diagnose the system fault, and make the
required repairs

No idea what those codes are
Never seen ones like that

SRS Codes are in Enhanced Data on a professional
scan tool,you can not get them from global generic
code reader

Oct 03, 2014 | 2011 BMW 328i Coupe

1 Answer

What helps with noisy engine lifters on 2008 bmw 328i coupe?

You will have to do a valve clearance set, a mechanic will know how to do this, hope this helps

Aug 30, 2014 | 2008 BMW 328xi Coupe

1 Answer

2011 bmw 328i

If the temperature control is on cool....sounds like you have other problems with AC. ( compressor not working, needs R134,) Check under the hood for a box that has fuses in it, their are also relays in it. Look for the relay marked AC.

May 27, 2014 | 2011 BMW 328i Coupe

1 Answer

Starting my 2008 BMW 328i it immediately stalled. I tried starting it again and this time it stayed running. Then the service light came on. Could this because my small vacuum leak or a dirty sensor?

I would disconnect battery for 20 min, refit negative lead and start vehicle. see if MIL light comes on. If not, carry on.
If light is still on then take your car to be scanned by someone who knows what they are doing. Please dont just guess, it will cost you a fortune and you will get very frustrated. It may well be a simple glitch that can be cleared.

May 10, 2014 | Cars & Trucks

1 Answer

Turn signals

try changing bulbs. check fuse.

Jan 10, 2009 | 1997 Geo Metro

Not finding what you are looking for?
1997 BMW 328 Logo

Related Topics:

125 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Fred Sops

Level 2 Expert

271 Answers

Al Clark

Level 2 Expert

290 Answers


Level 2 Expert

251 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides