- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
if your horns work with alarm using remote, then fuse and relay good if you hear no horn using remote set off alarm,and horn pad dont work, replace horn fuse and relay, if both okay, you have to replace the whole horn pad with air bag in steering wheel both horn control pads and airbag is one assembly.
i believe if you put key in ignition turn it forward and back off twice it should reset the anti theft to start it. or unlock pass door with key and that might reset it. also try the same with back pass door if the other didnt work. hope this helps.
THE WHOLE HORN PAD AND AIRBAG IN STEERING WHEEL HAS TO BE REPLACED.BECAUSE HORN PAD BUILT IN THE AIRBAG.IF YOU GOING TO REPLACE AIRBAG IN STEERING WHEEL YOUR SELF. DISARM AIRBAGS BY FIRST TURNING OFF RADIO,THEN REMOVE NEGATIVE BATTERY CABLE,WAIT 20 MINUTES FOR AIRBAGS DISCHARGE.BEFORE REMOVING THE AIRBAG HORN PAD.
This is the aftermarket alarm may be time for a new set but before you go that direction the alarm light may have shorted to a power and not affecting the alarm itself by the way does the alarm horn work and is it diconnected because if it is it realy activated. If it isnt and alarm horn works but the light always stays on the the alrm internal relays doesnt switch over. The fix most area will make you get a whole new one