Question about 2005 Chrysler Pacifica

1 Answer

A/c blower my front a/c is not blowing, but the back is blowing find. i change the fues for front blower but did not help.

Posted by on

  • pisces7475 Nov 09, 2008

    I am having the same problem except the front blows fine, but the back does not. I am also having a problem with an alarm on it just going off once in awhile when opening the doors. Any suggestions?

  • Anonymous Mar 31, 2009

    The front blower will not turn on. We took it out and tested it and it works and there is power getting to it but I'm guessing there is a switch in there that isn't working or the relay is having problems but i switched out the relay and it still doesn't work. The back still works just fine. The compresser works just fine to. It's just the blower.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need to change your fan blower resistor. About $80 on ebay. May be able to find one at a local salvage yard.

Posted on Apr 29, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1995 wind star min van blowe cool in rear and hot air in front plenty freeon fues are good


I would check the blend door actuator. If the door is open all the way, one direction, the air blows over the heater core. All the way in the other direction, the air blows over the evaporator. Anywhere in between, a blend of hot and cold for temp control. That explanation is a little simplistic. the info is for ford windstar.
26215466-yjvvzc0db2dujeaitzvxnfwi-2-0.jpg

Jun 09, 2016 | Cars & Trucks

1 Answer

I have a 2002 town and country Chrysler I turn on the a/c but in the front it wont blow cold or hot air but in the back were I seat my kids throughs cold air in the back


Your van apparently has dual heat and air and it sounds as if your rear unit is working and your front is not. Will the front blow at any speed? or is it completely dead? If it will only operate on a medium setting you should have your blower resistor changed out, but if it does not operate at all, check for voltage at the blower motor plug in. If you have power but the motor is not running then have the blower motor changed.

Apr 22, 2016 | Chrysler Cars & Trucks

1 Answer

The rear heater blows cold air and front does not blow at all. The only place that warm air comes out, is the defroster vents on the dash by the windshield. It actually warms the entire vehicle, but n


i hadsimale problems on my taho the ac wul not blow cold n the back only the heater would blow and the front would not blow i had to chang the front blower motor and the blower motoer relay in the back every thing is on the top of the rt pass wheel hump swap them out there the same parts to see what broke hat stuf is expencive hope this helps

Oct 17, 2012 | 2004 Chevrolet Tahoe

1 Answer

03 sequoia keeps blowing the blower fuse #42


ok hi there i belive you have a bad blower motor you will need to reremove it and test it on a 12volt battery. And check to see if it spins freley

Jul 10, 2012 | 2002 Toyota Sequoia

1 Answer

I'm fues to my fan keeps going out on my 2006 P.T


More than likely you have an internal fault either in the fan itself or the thermostat that activates it.

For a fuse to blow it has to have a lot higher than normal current draw through it, which is normally refered to as a short. If the fuse blows almost immediately then I would suggest you unplug the fan, and see if the fuse blows with just the thermostat in the circuit. If it blows - replace the thermostat control. If it doesn't blow, plug in the fan and watch it. If it trys to start and then blows the fuse, replace the fan motor.

Jun 30, 2011 | 2006 Chrysler PT Cruiser

1 Answer

What is the fuse box layout for 1998 nissan pulsar need to change a fuse but layout is all in Japanese dont know which fuse to look for . both front park lights are not working so wanted to check the...


Hi,if you know where the fues box is your half way there.
just buy a electricle screwdriver that has a light inside it with a wire that has got a crockerdile clip on the end,
put the cockerdile clip on a earth the body of the car,
then look at the fues on the top of the fues there is two little bits of metal these are where you will put the screwdriver blade to,
if yoy put the ignition on then go back to the fuesestuch one side of the fues on the little bit of metal the screwdriver should light,This is the power side,now if you tuch the screwdriver on the other bit of metal the light should come on again,if it dose the fues is ok,
if not the fues is falty(replace fues)do this to all the fueses and you will find the fues that is falty.
all the best.

Mar 20, 2011 | Nissan Pulsar Cars & Trucks

1 Answer

1992 gmc pickup keeps blowing heater fuses I replaced the blow motor and it keeps blowing


Have you replaced the blower resistor . some times they can cause the fuse to blow . You may need a muiltmeter to test the current draw on the blower motor circuit. the draw should be less then half of the rated fuse .( 20 amp fues draw is less then 10 amps) You did not say but does the blower work on high only or the lower speeds with out blowing the fuse ? if it does work on low or high with out blowing the fuse i would replace the blower resistor

Mar 06, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

My front air does not blow out (it works in the back). I changed the blower relay in the fuse box next to the battery and put in a new blower fan under the glove box but it still does not blow air out in...


Have you replaced the blower motor resistor? It's located behind the passenger-side in-dash glove box. That's what allows you to control the fan speed.

Jul 12, 2010 | 2001 Chrysler Town & Country

2 Answers

Blower fan on a/c quit blowing in front but still blows and blows cold air in back


first off make sure you have no blown fuse. but front blower motor may be bad. if it does not work in any speedyou can check for power at the wires going to the blower. under dash on passenger side

Aug 10, 2009 | 1999 GMC Yukon

2 Answers

I have a 1995 Toyota Corolla the blower to the


pull dash apart and check your switchs they might be dirty

Jul 13, 2009 | 1989 Toyota Corolla 2 Door

Not finding what you are looking for?
2005 Chrysler Pacifica Logo

Related Topics:

356 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

chargerhp
chargerhp

Level 3 Expert

813 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...