Question about 1995 Ford Mustang
Have checked fuses, doesn't look like that is the problem. What else should I check?
Check your tail light bulbs. I put new ones in and it fixed the problem, John from Oregon
Posted on Nov 13, 2008
If the fuses are OK maybe there's a cut off between wires from fuses going to your load (panel lights, side lights); or try to check your power relay.
Posted on Oct 19, 2008
check the wiring from the tailights back to the fuse panel, it sounds like an open connection. if i recall correctly check under the dash on the drivers side near the fuse panel for a bunch of wires in a bundle and look carefully for a wire or two that are cut/shorted/or seperated, you can also check under the drivers side kick panel by the hood release.
Posted on Feb 17, 2009
need to know if your third brake light up high is working or not.if it isn't,you need to check the brake light switch on the brake pedal with a test light,one side hot all the time,the other side should turn hot when brake pedal is pushed.
Posted on Jan 19, 2010
-check the dimmer relay under the hood , in the fuse and relay box.
- check the tail light relay located passenger's side behind the glove box
Posted on Apr 26, 2010
Tips for a great answer:
Mar 15, 2014 | Buick Cars & Trucks
Oct 23, 2012 | Chevrolet Cars & Trucks
Feb 26, 2012 | 1994 Pontiac Grand Am
The Tail lights and Instrument lights are usually on the same circuit so both will go out if the fuse for the circuit blows. Check for a blown fuse for this circuit and replace if out. If fuse continues to fail, check the tail light or side globes for a faulty globe and replace if necessary. Also check for any chafed wires that could be shorting to the body causing the fuse to blow.
Dec 13, 2010 | 2000 Chevrolet Malibu
Jul 26, 2009 | 1996 Isuzu Rodeo
Mar 13, 2009 | 2002 Mercury Mountaineer
Feb 16, 2009 | 1999 Chevrolet Silverado 1500
Dec 19, 2008 | 2001 Chevrolet Impala
Jul 20, 2008 | 2001 Chevrolet Impala
May 22, 2008 | 2005 Pontiac Vibe
31 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: