Question about 1992 Plymouth Voyager

1 Answer

Water pump i cant find the bolts to the water pump. can anyone send me a scamatic or drwing of the location. thanks in advance. my email is

Posted by on

  • 1 more comment 
  • damosr032271 Nov 30, 2008

    thanks for the info. I do have a 3.0. I found the bolts the hard way lol. It's a pain in the backside to get to cause you have to remove everthing to get to it.

  • frankster016 May 11, 2010

    N ot sure what engine you have??? We do need a bit of info to go on! Frankster016

  • Anonymous Mar 23, 2014

    Hi had to replace my water pump. And know I have a really loud squeaky sound coming from my belt area. Please help.
    Thanks Wynn



1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 702 Answers

If you have a 2.5L 4cyl, the bolts are under the timing cover. If the engine is a 3.0L the bolts are also under the timing cover. Both require removal of the timing belt. If it's a 3.3L the bolts should be able to be seen.

Posted on Nov 29, 2008


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

About water pumps

most of the water pumps on cars had a hub pressed onto the pump shaft and 4 small bolts holding the pulley onto that hub
even viscous fan hubs ( fan clutch) is bolted to the hub pressed onto the shaft
comment with a photo of the water pump that has the bolt in the middle and comment on the engine make and model

Oct 17, 2015 | Cars & Trucks

1 Answer

Im trying to remove the water pump from my bmw 316i 1996 but i cant get the fan off, hav removed the allan key bolts for the outer part of the fan but cant get the centre piece off to gain access to the...

To get the viscous clutch of the water pump you first need to remove the belt pulley and remove the water pump. Then put the impeller of the water pump in a vice and using a 32 spanner screw the viscous clutch off. Note that the bolt on the viscous clutch is of left hand thread so you have to unscrew the opposite way to a normal bolt.

Sep 09, 2010 | BMW 318 Cars & Trucks

1 Answer

Change the water pump. what size is the bolts

Location, size and torque specification for the water pump bolts-3.0L OHV engine...


  • Install the bolts in the water pump housing.
  • Tighten bolts Nos. 4, 5, 6, 7, 8, 9 and 10to 15-22 ft. lbs. (20-30 Nm). Tighten bolts Nos. 11, 12, 13, 14 and 15 to 71-106 inch lbs. (8-12 Nm).
    The bolts are of different lengths and must be installed in the correct locations.
  • If equipped, attach the engine control sensor wiring to the locating stud bolt.
  • Hand-tighten the water pump pulley retaining bolts.
  • Install the accessory drive belts.
  • Tighten the water pump pulley bolts to 15-22 ft. lbs. (20-30 Nm).
  • Connect the heater hose to the water pump.

Hope this help (remember rated and comment this post).

Apr 10, 2010 | 1999 Ford Taurus

1 Answer

I need to replace water pump were is it and scamatic

email me at i have diagrams and step by step instructions.

Feb 20, 2010 | 1995 Eagle Vision

1 Answer

Location of the washer pump

It's in the washer fluid reservoir. (Held in by a rubber grommet at the bottom of the reservoir bag) Easiest way to get to the pump is to remove the reservoir. (One bolt)

Sep 09, 2009 | 2000 Volkswagen Golf

2 Answers

Have antifreeze leak bottom of my dodge dekota sport1997 pick up

need engine size will email you step by step with photos send info to 2wd or 4 wd?

May 31, 2009 | 1997 Dodge Dakota

1 Answer

My timming belt slipped on my 93 sunbird. Where can i go for a free step by step repiar manual.

I Have Pictures But they must be Emailed as JPEG file
FixYa Does not have Un-Encription software so that I can Send Pics through . I can be reached @ with this screename. Be More than glad to send them to send em

  • J-33039-A, Cam drive belt tension adjustment wrench.
NOTE: O.E. manuals do NOT provide images of the timing marks, however, the alignment marks are located on the camshaft and crankshaft gears and the rear timing belt cover.

  1. Battery ground cable, then partially drain cooling system.
  2. Coolant recovery reservoir.
  3. Serpentine, A/C and/or P/S drive belts(if equipped).
  4. Evaporative emission pipe assembly.
  5. Crankshaft pulley.
  6. Timing belt cover attaching bolts and the cover.
  7. Align marks on timing gears with the marks on the rear timing cover.
  8. Loosen water pump bolts, then using J-33039-A on the water pump eccentric, release the belt tension.
  9. Timing belt.
  1. Turn crankshaft and camshaft gears clockwise to align timing marks on timing belt rear cover.
  2. Timing belt, making sure that the portion between the crankshaft and camshaft gears is in tension.
  3. Using J-33039-A rotate water pump eccentric clockwise until tensioner contacts high torque stop, then tighten water pump bolts slightly.
  4. Rotate the engine by the crankshaft gear bolt 720°clockwise to seat timing belt on sprockets.
  5. With engine at room temperature, rotate water pump eccentric with J-33039-A counterclockwise until hole in tensioner arm is inline with hole in base.
  6. Tighten water pump attaching bolts to 25 Nm (18 ft lbs) and ensure tensioner holes remain aligned.
  7. Timing belt cover and tighten bolts and nuts to 9 Nm (80 in lbs) .
  8. Crankshaft pulley, apply Loctite(R) 242 to bolt threads and tighten to 21 Nm (15 ft lbs) .
  9. Evaporative emission pipe assembly.
  10. Serpentine, A/C and/or P/S drive belts (if equipped).
  11. Coolant recovery reservoir and fill cooling system.
  12. Battery ground cable.

Mar 14, 2009 | 1993 Pontiac Sunbird

2 Answers

Cant find the thermostat on a 1998 jetta

The thermostat is located on the bottom of the water pump on the front of the engine. The lower radiator hose connects to it. You must remove the lower radiator hose. Then remove the slide clip from the plastic tube on the thermostat housing. Remove that plastic tube. Now remove the side cover in the passenger side wheel well. Then remove the 5 bolts holding the power steering pump on and then remove the power steering belt. Now swing the power steering pump to the side. you will now be able to access the two 8mm bolts holding the thermostat in place. And there ya go. Be careful if you snap those 8mm bolts on the thermostat you are gonna have to replace the housing. And you don't want to remove the water pump to do that. Trust me. ; )

Sep 16, 2008 | 1998 Volkswagen Jetta

1 Answer

Water pump and timing belt removal

you could always jam the flywheel with a bolt inserted between the ring gear and the transmission housing, be sure to tie the bolt to something outside the engine so when it falls in the housing you can retrieve it back without ease. or you can always bring it to me. my email

Sep 10, 2008 | 1989 Toyota Corolla 2 Door

Not finding what you are looking for?
1992 Plymouth Voyager Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts


Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8826 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides