- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
First find another shop or mechanic. Here is a list of things. Ignition switch stay on, wiring, interior lights stay on(glove box, visor mirror lights), Radio, starter, and computers not working right. If you have an overnight drain where the vehicle doesn't start. I would look at the ignition switch first. Accessory and off are close, so if the key pulls out early or late, everything could be on.
2003 Chevy Silverado our rearview mirror has gone off and the airbag light stays on. i've determined that this is a fuse, the SIR fuse under the hood, but what I can't figure out is why it's blowing. It's either something to do with when we hook up the lights to the trailer or it might be from where we installed a new car stereo. I took it to the Chevy dealer for some other things and told them there was a fuse blown to the rearview mirror and to the airbag and just asked them to replace the fuse while it was in the shop. on top of the $700 i was already spending, they charged me $98 to diagnose that it was a blown fuse and like $11 to change it, even though I already told them it was the airbag fuse. Highway robbery. And they wonder why we don't like 'em.
ck interior light fuse (10 amp) make sure the dome lamp is not in the OFF position. with the mirror, the outside temp sensor could be bad or disconnected. the sensor is near the front grille, in front of the radiator. a little 2 wire sensor. if it has been wrecked, maybe it did not get put back on.
Hiya...ALL factory-installed rearview mirrors are installed with different wires due to options.
About 6 different rearview mirrors are installed with those options such as On-Star, light, compass, and those features which use different wires....THIS CANNOT be modified with different rearview mirror....**for example, the Equinox owner attempt to pull out a factory-installed base rearview mirror and put in different one that has compass/temperature built into the rearview mirror**
However, the wires are located inside the front headliner which requires removing the sunvisor (and possible removal of interior plastic trim part at the left/right ends of the windshield) prior to pull the headliner down, and a small metal philips or torx screw is used to secure the rearview mirror onto the bracket glued to the windshield.
The best solution is to leave the original factory-installed rearview mirror in place.