Question about Hyundai Motor 2000 Tiburon

1 Answer

Weird Noise I own a 2000 tiburon, I have started to hear a weird noise from the back driver side tire when I turn right.  Its not all the time, and it doesnt sound like metal on metal.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 157 Answers

Sounds like a wheel bearing.You need a mechanic with a lift and some heavy tools. It's not a big deal.

Posted on Feb 04, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Struts noise?


I would tend to believe it's more likely a worn sway bar bushing or link if it's a rattle or a small clunk, if it's a loud clunk probably a strut, try bouncing he back of the car when parked, if you get the clunk probably a strut if only when driving,turning,braking probably just a bushing on the sway bar

Jan 18, 2014 | Toyota Camry Cars & Trucks

1 Answer

MAINTENANCE


My advise is to get it checked out. Depending how many miles on the brakes something could be falling apart. If it's serious it could cost you big money if you just keep driving it. I saw at one time a wheel fell off because the bolts had broken off. Better be safe than sorry.

Jan 29, 2018 | 2000 Ford Crown Victoria

1 Answer

Right front axle replaced now there is a noise


check the wheel bearing adjustment or condition as it may not have been reassembled correctly

Nov 13, 2013 | Cars & Trucks

1 Answer

2003 GMC Yukon- when driving I have a weird grinding noise in lower speeds and then again when driving around 50-60 mph. it does seem to affect the steering wheel as well. Now when turning left the I get...


It sounds like a wheel bearing is going bad. They are easy to change. If you have a place to jack the vehicle up. Try spinning the front wheels. You should hear a scraping noise as the wheel turns.Also replace both sides at the same time,as the otherside is not far behind.

Oct 01, 2017 | 2002 GMC Yukon XL

1 Answer

My 2000 4runner started to make a weird noise by fhe fuse belowon the left of the steering wheel after I try to close the windows there where no power and to lock the doors from outside nothing no power I...


Not sure here to be honest as it could be a connection terminal arcing but without a look myself i couldnt say as its not a fault i come across often

Mar 08, 2012 | 2000 Toyota 4Runner

1 Answer

When i accelerate, I hear a weird noise that is


Could be CV joints or wheel bearings. Need to have them checked it could be dangerous.

Apr 07, 2010 | 2000 Acura Integra

1 Answer

Weird noise while turning


It could be a CV joint.

Jan 12, 2010 | 2001 Dodge Neon

1 Answer

I have a weird rattling noise when I put my Audi


Have the code extracted it may have to do with your transmission and weird rattling noise you hear.

Nov 29, 2009 | 2004 Audi A4

1 Answer

2003 Hyundai Tiburon making a weird noise


Hello mpolci...The 2003 Tiburon was sold to the public with a defective clutch, it failed due to warpage and bad pressure plate... among other things. There are MANY class action lawsuits. Did you resurface or replace the flywheel when the clutch was replaced? Did you go with an aftermarket clutch kit, or factory? Also the slave cylinder on the 03 was known to have a defective valve.
You can try checking the levels and bleeding the system and if you still have problems, then it could be a release bearing, a loose clutch pad, or a broken pressure plate spring....If the clutch is still under warranty, i would return it to the installer.
Good luck, i hope this helps...please rate me a fixya.

Aug 01, 2009 | 2003 Hyundai Tiburon

Not finding what you are looking for?
Hyundai Motor 2000 Tiburon Logo

Related Topics:

163 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

78289 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...