Question about 2003 Audi A6
The Hazard and turn signals share the same relay module located in the dashboard behind the hazard switch. Remove the trim by prying from the sides (Either side of the Cup holder drawer and Card drawer). Pry the hazard switch assembly out from the dashboard. The relay is part of the hazard switch assembly.
Unclip the wiring terminal from the relay. replace with appropriate relay. Part costs under $50.00 delivered from Import Parts Specialists.
Posted on Jan 03, 2009
The hazard relay is located in the dash behind the triangle shaped switch that you are tapping on. The relay is actually 2 relays, one for the turn signal and the other for the hazard. The turn signal relay has dirty contacts.
Posted on Feb 04, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: HAZARD LIGHTS ON BUT NOT
I have the same problem - it is the relay switch attached to and behind the hazard warning triangle on the dashboard. Pull it all out (gently and replace (£60 ish). The indicators and hazard lights are on the same relay circuit. This is a well known problem for this car (amongst others - how about the wipers sticking)
Posted on Nov 25, 2008
Hi, If you have a towbar fitted this could be a wiring problem with the towbar socket wiring. If no towbar fitted this would need to be experienced to diagnose further.
Posted on Apr 27, 2009
check the fuse sounds like that has blown as hazards work on a relay indicaters are off a fuse
Posted on May 20, 2009
Hazard light switch fails a lot on Audis and VWs. It is located above the radio. It is the big red button with the triangle on it. To removed and replace you need to remove the radio. Note special audi radio tools require to remove radio. Once the radio is out there is a black cover above where radio was at. This cover pulls out. Now you can access the Hazard lite switch. I would install new switch and test before reassembling.
Posted on May 28, 2009
Most common cause is a failed indicator relay. Just swap it with a known good one to confirm whether it's faulty but ensure it's correctly rated for your Kangoo.
After that, the next most common causes are more expensive: the indicator switch and the hazard light switch.
Posted on Nov 01, 2009
Tips for a great answer:
Jan 08, 2018 | Cars & Trucks
May 12, 2016 | 2002 Chrysler PT Cruiser
Nov 13, 2014 | 1987 Citroen AX
Oct 18, 2014 | Cars & Trucks
Sep 05, 2012 | 1999 Oldsmobile Aurora
Jun 16, 2009 | 1997 Mitsubishi Mirage
Apr 27, 2009 | 2003 Volkswagen Passat
Oct 29, 2008 | 2002 Audi A6
Aug 31, 2008 | 2000 Audi TT
2,322 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: