Question about Mitsubishi Eclipse

1 Answer

2003 eclipe 2.4 auto. No codes. Long crank time before starting. Car has 70K on it. All services done.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Guru:

    An expert who has written 7 tips or uploaded 3 video tips

  • Master
  • 674 Answers

You need to check your fuel pressure . ive seen many problems with these cars with low pressure then you have a long crank time to start.

Posted on Nov 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why does my car die when I use my turn signals?


This is an indication of insufficient current available to run all the systems . Go back to basics and clean the battery terminals and posts and ensure that they are tight. Have a load test done on the battery because if you have a failing battery (won't crank) then the alternator charge will be feeding that cell and not the electrics of the car. Have an accredited auto electrician check the alternator for serviceability. Lastly check the condition and tension of the drive belt.

Aug 09, 2014 | 2003 Buick Regal

1 Answer

2003 eclipes gts will turn over but not start


could be a cam or crank shaft sensor...
what happened prior to this? -- check engine light on?
Need to check fuel quality, delivery & spark to the plugs to begin..
Best regards
Ck

Nov 13, 2011 | Cars & Trucks

2 Answers

2003 mitsubishi eclips gt does not start have fuel but no spark


Crank sensor is dead get a new one have it replaced/ Cam sensor controls gas / Crank sensor controls Spark

Apr 04, 2010 | 2003 Mitsubishi Eclipse Coupe

1 Answer

Why would a 2003 nissan occasionally not crank and after cranking stall out while driving?


if crank or cam sensor fails then it will cause hard time starting, shut off while driving, here are the fault codes--po340 is camshaft sensor. have car scanned at any auto parts place they will scan it for free. these two things will cause a problem code.

Jan 15, 2010 | 1998 Nissan Pathfinder

1 Answer

2003 Dodge Neon: P0016 (already replaced sensors, belt, tensioner


the computer may need to be reflashed. if it is running then it is not a bad sensor. either of those being bad would cause it not to run.

Jun 20, 2009 | 2003 Dodge Neon

1 Answer

Changed the harmonic balancer car wont start


is the balancer in the correct position?
have you removed the crank angle sensor?

Jun 03, 2009 | 2000 Mitsubishi Eclipse

1 Answer

Jeep Grand Cherokee Power Loss


a bad cam sensor will cause vehicle to shut off while driving, and cause a hard time starting. but this usually sets a trouble code p0340. scan vehicle to see if any codes come up. after it is fixed, erase codes with a obd2 scanner. if you do not have one, you can go to any auto parts store and they will erase codes for free.

May 02, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Car wont start for a few minutes, then starts and runs fine.


Try using an OBD II diagnostics tester to see if there's a fault code stored in your pcm, if you don't have one you can purchase one at most auto parts store's, some auto parts stores will do this test for you at no cost, one for example is auto zone, this should tell you what the problem might be. Good luck.

Mar 20, 2009 | 2004 Infiniti M45

1 Answer

Intermittent starting problem-now will not start


fuel system and ignition system must be check.

Dec 06, 2008 | 1990 Mercedes-Benz E-Class

2 Answers

I have a 2003 Yukon XL with 70K miles. What maintenance is required.


coolant flush and fill.. differential oil changed out ( assuming you have done trans service already also ) .. driveline (u-joints) and steering linkage lubed , fuel filter(s)..and all belts /hoses inspected ... have fun :)

Oct 20, 2008 | 2003 GMC Yukon XL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

95 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60867 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...