How do you reset the airbag light? And if not possible how do you replace the module?
Also I turn off the engine and the fan still runs and if in the auto mode the fan stays on low. If I turn off the auto mode and put the fan on high the bars go up but the fan will stay on low sometimes and at other times it works...
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The airbag in your vehicle is an important safety device, and the airbag
module ensures the proper functioning of your vehicle's air bag. If
this module is not functioning properly, your airbag may not deploy
during a crash. When there is a malfunction, your airbag module warning
light will illuminate on your vehicle's dash. You will need to have the
airbag assembly checked out by a qualified mechanic, but once that is
done, you can reset the warning light and airbag module unit. If you've
never done this type of job before, it should only take you 5 minutes.
Open the hood and loosen the retaining nut on the negative cable wire cable clamp using a socket wrench.
Slide the cable clamp off the negative battery terminal.
Wait 3 to 5 seconds and
reconnect the battery terminal. Tighten the retaining nut using a socket
wrench. Once the power is restored, the airbag module should be reset.
Verify that the module has been
reset by turning the ignition key to the "II" position and checking to
make sure that the airbag light does not illuminate.
You need to get the codes from the Supplemental Inflatable Restraint module S.I.R.This is the only way to tell what is causing the light to come on.Let me know what codes you get and I`ll be glad to help you out.Hope this helps.Good luck.