Question about 2000 Dodge Neon

1 Answer

Putting a 03 4cy motor in a 00 dodge neon

2003 motor in a 2000 neon.... the computer controls the timming, if i change the ICM in my 2000 neon to an ICM of an 03 neon would that fix my timming problem? The crank sencor of the 2000 is on one side and the 03 is on the other side, i think it is registering wrong. what can I do to make this work???


Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 35 Answers

Oh ya you definitely have to have the computer and the complete wiring harness for the new engine. 00-02 was the new body style and new engine in 03 they modified the body style and the engine. IT is a hard transfer but very possible. Good luck

Posted on Feb 10, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Car momentarally shutters at all speeds and gears more and more frequently after it is warmed up. You can feel it slightly at idle.


2003 neon shaking after changing both right motor mounts ...

www.topix.com > Dodge Neon
Mar 10, 2012 - ... News Offbeat Stars! Topix > Dodge Neon > 2003 neon shaking after changing both. .... Google dodge neon engine alignment, and some sites will fill you in better. Reply ». Report Abuse .... 95 neon oil leak? (Oct '08), Oct 22 ... dodge neon engine vibration
Nov 10, 2012
2004 Dodge Neon SXT Problems
Jan 8, 2011
02 neon vibration under acceleration
Jul 21, 2007
97 Neon Idle rough
Jan 18, 2007
More results from www.topix.com

Oct 29, 2015 | 1995 Dodge Neon

1 Answer

My car is Shaking while idling whats the deal


Check the 3 motor mounts and 1 transmission mount. As they wear out the motor is allowed to shift and vibrate. Be sure to use only original dodge products though,as the cheaper ones won't last a year. This happened to me. I hope this helps.

Dec 24, 2014 | 2003 Dodge Neon

1 Answer

2002 dodge neon wont start after changing mid motor mount.


Double check that you didn't unplug something in the mount change or a ground wire left off a bolt on the mount.

Dec 17, 2013 | 2002 Dodge Neon

1 Answer

Change timming belt. where marks have to be set? 92 dodge colt


I lost you, stupid computer. Anyhow there are 8 different engines for the dodge colt in the early 1990's I can only assume its the 1.4L, 1.5L or 2.4L. The 1.4L & 1.5L the timing marks are exactly the same. The Cam points to 3:00 marks ther. The crank points almost straight up, slightly to the right, mark on engine cover. The 2.4L has 3 marks, The crank has an alignment mark at approximately 10:00, the cam sprocket points straight up at 12:00 and the idler pulley (to the right of crank shaft pulley) points approximately 11:00. They should all have a notch or mark when aligned. The short secondary belt, the crankshaft should be in the same location 10:00 and the balance shaft (to the left) should be at 9:00. This goes on after of course. Rotate engine 2 full revolutions and recheck marks before starting engine.

Feb 02, 2011 | 1992 Dodge Colt

1 Answer

My 96 dodge neon wont start i change the coil but still did not


Change the cam sensor. I had the same problem you did and once i change this little sensor, car started right up!

Feb 28, 2010 | 1996 Dodge Neon

2 Answers

PUT A 2003 ENGINE IN A 2000 NEON EVERYTHING SEEMS THE SAME EXCEPT THE CRANK SENSOR ON 00 WAS OVER OIL FILTER AND ON03 MOTOR IT WAS AT REAR OPOSITE SIDE I CKECKED AND BOTH HAD THE SAME SENSOR PLUG AND WIRES...


the tone wheel on crankshaft is different in the 03 engine..slots are cut different for next generation controller(03)..the 2000 controller will not recognize these slots properly..i don't think you can remove tone wheel from 2000 crankshaft and put on 03..start looking for another engine..i would say a 1997-2002..has to have crank sensor above oil filter..i hope this helps

Jan 24, 2010 | 2000 Dodge Neon

1 Answer

98 dodge neon


if 2.4l or 2.0 is about the same you will have to pull your balancer pulley then take off the guard around it then loosen the timein tincher then take your timein belt off then you should see your water pump everything is going to be on the side of the motor and probably will have to put a jack up under the motor and take the motor mount off the side of the motor.

Jun 19, 2008 | 1998 Dodge Neon

Not finding what you are looking for?
2000 Dodge Neon Logo

Related Topics:

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...