Question about Mazda MAZDA3

1 Answer

Cruise control turns off when using turn signal. Just install trailer wiring harness. 2007 Mazda 3 with LED tail lights

Posted by on

  • msaturbo Dec 27, 2008

    Problem was fixed. Trailer wiring company sent me a new control module for the trailer lights. It took three different modules to find the correct one. They had one specifically for LED lights.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Mazda Master
  • 70,346 Answers

If this problem was not there before you installed LED lights that may be the cause, there may be a electrical spike from the LED high voltage circuit that turns the cruise off, you might want to call the tech support of the company that made the LED light kit.

Posted on Nov 02, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Trailer light hook-up


If this DeVille is trailer-ready, there is a trailer harness fuse box with 10A fuses for tail lights (PPL wire), left turn/stop/tail lights (YEL wire), and right turn/stop/tail lights (DK GRN wire

Oct 16, 2012 | 2001 Cadillac DeVille

1 Answer

I'm trying to wire my 89 jeep wrangler to be towed useing it's existing lights.the turn signals both flash when right or left is on? I've tryed it under the dash with no luck now all the way...


If the brake and turn signal are on the same bulb than you can Orin straight wiring. If the brake and turn signal are on different bulbs than you'll need a wiring harness with a converter box. I'm pretty sure the wrangler has the brake and turn signal on the Same bulb so let's start with basic trailer wiring. The green wire on the trailer harness is for the right side turn and brake for the trailer. This wire should be attached to the wire on the vehicle that supplies power to the right turn signal/ brake light. The yellow wire is the left turn signal, brake light on the trailer and should be attached to the wire on the vehicle that supplies power to the left turn signal /brake light. The brown wire is the tail lights on the trailer and should be attached to either the left or right side wire on the vehicle that supplies power to the tail lights. The white wire is grounD and it is vitally important that this wire be attached to the vehicle in a manor that supplies a good ground. Failure to suppy a good ground will result in all kinds of funky problems with the trailerer lighting such as all the lights linking when the tail lights and turn signals are on at the same time. If you have any specific questions I will be more than happy to try and help. Good luck.

Jun 29, 2011 | Jeep Wrangler Cars & Trucks

1 Answer

I have a 2006 GMC Envoy and I am having a problem with my passenger turn signal on my boat trailer. The brake lights and parking light work fine. The lights are LED. I have tested the plung on the...


is trailer lite fixture grounded good try and wiggle fixture when u hit signal. next try wiggle pig tail on trailer , still no signal. it must be wire from truck, trace back to connection and check all splices. to see if signal light works on trailer unhook pigtail and get a battery charger or another battery, connect a jumper from positive side to signal spot on trailer hook up. hook up ground as well see if light works if not its in the truck for sure.

Apr 01, 2011 | GMC Envoy Cars & Trucks

1 Answer

My o3 navigators adjustable brakes will only move about 1/2 inch either direction. It's fine if they don't work but is there any way to move them to the farthest position manually?


With both tail light lenses removed locate the black with yellow wires and the dark green with brown wires coming out of the brake/tail/turn signal sockets.

The black with yellow wire will be the running lights or tail lights and the brown wire from the trailer harness will attach to it.

The green wire on the trailer harness will be the right turn signal and will be attached to the passenger side tail light harness dark green with brown wire.

The yellow wire on the trailer harness will be the left turn signal and will be attatched to the dark green with brown wire on the drivers side tail light harness.

The white wire on the trailer harness is the ground wire and will need to be attached to a good ground. Is it pretty easy to crimp an eyelet onto the end of the wire and use a self tapping screw to attach it to the body behind one of the tail light lenses.

Here is a trailer light/wiring article I have done in the past. It has a couple of good tips you may find useful.

http://www.hotspotoutdoors.com/forum/ubbthreads.php/topics/1425999/1/Trailer_Wiring_101

Oct 27, 2010 | 2003 Lincoln Navigator

1 Answer

How to wire a 4 pin connector for a LED Tailgate bar into the brake lines on a 2000 dodge dakota without trailor plug


With both tail light lenses removed locate the black with yellow wires and the dark green with brown wires coming out of the brake/tail/turn signal sockets.

The black with yellow wire will be the running lights or tail lights and the brown wire from the trailer harness will attach to it.

The green wire on the trailer harness will be the right turn signal and will be attached to the passenger side tail light harness dark green with brown wire.

The yellow wire on the trailer harness will be the left turn signal and will be attached to the dark green with brown wire on the drivers side tail light harness.

The white wire on the trailer harness is the ground wire and will need to be attached to a good ground. Is it pretty easy to crimp an eyelet onto the end of the wire and use a self tapping screw to attach it to the body behind one of the tail light lenses.

Here is a trailer light/wiring article I have done in the past. It has a couple of good tips you may find useful.

http://www.hotspotoutdoors.com/forum/ubbthreads.php/topics/1425999/1/Trailer_Wiring_101

Oct 27, 2010 | 2001 Dodge Dakota

3 Answers

Trailer lights have two wire out of each fixture left turn goes on left side Right hand turn goes on the other side Tail lights connect how and brakes connect how?


One wire is for the brake/directional filament and the other wire is for the tail light. The fixture should be grounded when it is attached to the bracket. To test which is which (the brown wire is USUALLY the ail light) make sure the fixture is grounded and touch a hot wire to each of the wires coming from the fixture. Watch to see which wire lights up the brighter filament and this is the brake/directional light. The dimmer filament if the tail light. Brakes lights and directional lights are both the same filament. Wen the brakes are applied, both lights are activated. When a direction light is turned on, it simply flashes the brake light filament.

Apr 04, 2010 | 2007 GMC Sierra 3500HD

1 Answer

How do you wire up a trailer harness to a 1999 Grand Voyager?


Your earth is bonding properly. Make sure you have a good bond that is fixed either to your chassis, with all rust, sealent and other cotings are removed frois should dolve your problem.m the fixing. Th

Jul 25, 2009 | 1996 Chrysler Town & Country

1 Answer

Need wire diagram to hook up trailer lights, truck not factory equipped w/harness,


I'm assuming you're just going to splice into the tail light wiring so that's what these wire colors are:
at the tail lamp 3 way connector:
black and yellow = park lamp
dark green and brown = left turn signal
there should be another connector with violet and black wire for reverse lights.
the stop lights are turned on through the turn signal circuits.

Apr 12, 2009 | Dodge Dakota Cars & Trucks

1 Answer

2001 Sportage Trailer wire connections


brown to the tail lights. yellow to left turn signal. green to right turn signal. this is a basic 3 wire hook-up i use all the time w/4wire connectors for all trailers. white wire is not used. ground is established when you hook to the ball.
to find the correct wire to splice to, use a testor (has a clip to the bare wire, and a sharp point to the truck frame). using a needle, push it through a wire to rear light harness. turn on the turn signal. check if the connection is the blinker, testing until you have the blinker wire. the tail lights can be attached to the license plate wire. brakes and blinkers use same wire, so brake lights will work whenever the turn signal is attached.
to be sure everything is working right, have a second person go inside the truck and work the signals, brakes and lights one at a time while you are at the back of the trailer telling what to do.

Oct 24, 2008 | 2001 Kia Sportage

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...