Question about 2002 Jeep Liberty

3 Answers

2006 Jeep Liberty sporatice warning signals

I have a 2006 Jeep Liberty that has gone in for service due to the engine warning light dinging sporatically, as well as, the gascap signal going off.The service dept did not find any codes and could not find a problem. We picked it up from the dealership and within 5 miles of traveling the gascap warning went off and within 20 miles the check engine signal went off as well as multiple other dings. We have checked gascap several times to ensure that it is properly tightened.

Posted by on

  • 2 more comments 
  • slickone653 Nov 04, 2008

    The o/d light also comes on sporaticaly but it dosn't have over drive.

  • mff45 Feb 11, 2009

    I've just developed the same problem with regard to the "gascap" trouble light on a 2006 Jeep Liberty. Changing the gas cap hasn't solved it. I plan to check any OBD codes generated. My suspicion is that it's a sensor problem or an EGR problem that won't allow pressurization of the fuel system.

  • Anonymous Feb 16, 2009

    Same problem Gas cap alarm and engine light come on intermittently
    also some stalling


  • GMCSprint May 02, 2009

    Our 2006 Liberty (aka Last Jeep) dings for no reason, flashes 'gascap', insists the OD is on when it isn't and the transmission is overheating. It's not a safety problem so Chrysler isn't interested, but it is an electrical bug in the system. An OBDIII meter indicates there is no problem so we live with it. And the split leather seat, and the cracked windshield over the defroster. Chrysler can file for bankruptcy until the cows come home, our 2006 will still be a piece of junk and - after 4 jeeps in 15 years, our Last Jeep.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I had the same problem with my 2006 Jeep Liberty Renegade. I shared with the Jeep service tech what I found on the internet regarding this problem. I was having the gas cap sensor to display and soon after other sensors were lighting and dinging and some times dinging without any indicator and vice versa. the service tech said he was not aware of any such complaints and recommended a diagnostic which found no trouble codes and recommended to change to the gas cap. I did so and no sooner than paying almost $100 for the service and returning home the same thing started happening again. I returned my vehicle and they called the Chrysler/Jeep service tech who obviously was aware of these complaints [Service Bulletin #14-001-06] and recommended the following: A complete system reboot. Disconnect the battery cables and short together for 15 seconds. If message returns then the problem may be with cluster. I have not had any dinging or gas-cap sensor display since this was done.

Posted on Jan 27, 2010

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had this problem. It happened immediately after i performed maint. I retraced my steps and realized i moved a ground on the driverside behind the headlight. i removed it cleaned it up good and reset. I have had no other issues...problem solved.

Posted on Aug 10, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 475 Answers

Start by replacing the gas cap. You are venting fumes into the air.

Posted on Nov 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Luz marcada con el numero cinco?


2003 Jeep Liberty- Reading Engine / Diagnostic Codes ...

? 1:13
https://www.youtube.com/watch?v=pGrPBBzp7wE
Jan 6, 2013 - Uploaded by DeathScouter
2003 Jeep Liberty- Reading Engine / Diagnostic Codes ..... error code will flash 2 times, brief pause, flash 1 time, pause, flash 5times, pause, ...

2005 Jeep Liberty possible cause of P0442 error. - YouTube

? 5:26
https://www.youtube.com/watch?v=2ba-gH0gadg
Dec 21, 2014 - Uploaded by TheBGravit
While replacing a bad fuel pump I believe I found the cause of a P0442 Error code. I was able to repair the ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - My jeep Liberty 2009 does the same the Dashboard showed a code of cylinder .... i have a jeep liberty 2006 with the # 5 cylinder misfire. i replaced the sparks... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the ... 2002 jeep liberty camshaft posistion sensor error code p0340 5 answers.

Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Recently got a second hand 2005 Jeep Liberty Sport. Everything worked fine ... #5intake valve seat dropped and held open the intake valve. 2008 Jeep Liberty.

OBD-II Trouble Code: P0305 Cylinder 5 Five Misfire Detected

www.obd-codes.com/p0305


Dec 08, 2015 | 2005 Jeep Liberty

1 Answer

03jeep lbertyrandom missfire cyl 2 4 6check engine light flashing


Check Engine Light/Misfire Due to Intake Valve Locks ...

repairpal.com > Problems > Jeep > Liberty
Jeep Liberty Check Engine Light/Misfire Due to Intake Valve Locks/Valves. ...Misfire cyc 4 and random cyc misfires, changed coil packs and plugs... sounds as if rod ... Light came on again (misfire on cylinder 4) - switched coil from 4 to 2. Light ...

Jeep Liberty Questions - Cylinder Misfire code - CarGurus

www.cargurus.com > Questions > Jeep > Liberty

CarGurusMay 27, 2009 - #4 misfire new plugs and coil pack on #4 light came back on after 300 miles if ... How come it stopped misfiring for 2-3 months, and now is back? ... I have a 2005 Jeep Liberty 6 cylinder, engine light came on scaned the codes ...

Liberty Cylinder Misfire / Computer issue? - JeepForum.com


Nov 28, 2015 | Cars & Trucks

2 Answers

Solid red dot came on right side. Now turn key and nothing


3.7L gas or Diesel? (know what you are driving?)
jump start it , call AAA and do that.
or uses your jumper cables, buy them and keep them hidden in car at all times.
battery lugs all white with corrosion, clean them.
wiggle shifter yet.? while cranking?
try to crank it, in Neutral not park , yet?
cranking takes 20 times the current than headlights. or more diesel.
and 1000s times DING power. so means nothing.

what light the glove box oper guide tells you all lamps
book is free if lost (ask)
30 objects, which one is RED?
on my 08 the solid red (has no mark) is SKIM immobilzer light.
(its a stealth light on purpose) #20 is left. (kills fuel not cranking)



25474689-nm5j4bbnbv1totvdynd4zlxy-2-0.jpg
did you mean, the Charge lamp was ON, just before the ENGINE
died, lamp #10 , THAT MEANS the charge system failed.
and that cause the battery to DISCHARGE.
and then engine must die. (all cars)
charge the battery and cure #10 lamp warning true cause.
never drive and ignore warning lamps if you in fact did.

how'd I do?

Feb 24, 2015 | 2006 Jeep Liberty

2 Answers

HOW TO REPLACE WATER PUMP ON 2009 JEEP LIBERTY


It is a pretty straight forward job. Rock Auto is one of the best parts sources.
RockAuto Parts Catalog

Feb 01, 2015 | 2009 Jeep Liberty

1 Answer

Code u1411 jeep liberty 2006


wow , no engine options stated, or type of driveline.... wow.
this is covered in the FSM, read that.
it states
U1411-Implausible Fuel Volume Signal Received that means to get the car fully scanned,
using a real scan tool that sees all 2006, jeep DTC errors.
including BCM codes.
the manual tells you what to do.

here is just small expert from the Factory.serv.manual

quote
Always perform the Pre-Diagnostic Troubleshooting procedure before proceeding. (Refer to 9 - ENGINE - DIAGNOSIS AND TESTING)(Refer To List 1).
Theory of Operation
The BCM has to send the PCM a fuel volume signal over CAN C. The signal the BCM sends over CAN C is implausible.
Diagnostic Test
1. ACTIVE DTC
Ignition on, engine not running.
With a scan tool read DTCs.
Is the DTC active at this time?
Yes
  • Go To 2
No
Refer To List: 2. CAN C BUS DTCS ALSO ACTIVE
With a scan tool check for DTCs in the BCM.
Are any CAN C related DTCs active at this time?
Yes
  • (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES - DIAGNOSIS AND TESTING) for the appropriate diagnostic procedures.
  • Perform BODY VERIFICATION TEST - VER 1. (Refer to 8 - ELECTRICAL/ELECTRONIC CONTROL MODULES/FRONT CONTROL MODULE - DIAGNOSIS AND TESTING)
No
--------------------------------------------------------------------------------------------
that word CAN , means the vehicle network communications buss called CAN.
if the PCM can not TALK to the BCM. this can cause the
data to be wrong. and the
Implausible , data.
greek ,huh,
get it serviced by any ASE shop in town or if desperate JEEP.

Oct 03, 2014 | 2006 Jeep Liberty

1 Answer

When i turn my lights on while driving A code reads, at the odometer, NO BUS - My warning lights flashed on and a dinging sound could be heard. my oil light and engine light came on. My gas, speed and RPM...


You may need the dealer for this.
NO BUS means the body computer, engine computer, and instrument cluster are not talking to each other correctly. It could be a wiring problem or something in one of the components.

Jun 05, 2013 | Cars & Trucks

1 Answer

2003 jeep liberty p0138


P0138 CHRYSLER - O2 sensor 1/2 Circuit high
Symptoms - Engine Light ON (or Service Engine Soon Warning Light)
- High Fuel Consumption
- Excessive Smoke from Exhaust Possible causes - Rear Heated Oxygen Sensor Bank 1 harness is open or shorted
- Rear Heated Oxygen Sensor Bank 1 circuit poor electrical connection
- Faulty Rear Heated Oxygen Sensor Bank 1
- Inappropriate fuel pressure
- Faulty fuel injectors
- Intake air leaks may be faulty
- Exhaust gas leaks

Jan 27, 2012 | 2003 Jeep Liberty

3 Answers

A code read at the odometer NO BUS - My oil light and engine light came on. My gas, speed and RPM hands do not work. My air bag light stays on as well. i do have head lights but the light will not come on...


Locate the fuse in the fuse box the =Bus fuse may be blown, if the fuse is not blown then the voltage regulator on the back of the instrument panel has gone bad and you will have to pull the cluster out to fix it.

Jan 27, 2010 | 2004 Jeep Liberty

1 Answer

2006 Jeep Liberty parking lights on driver's side won't work


Check fuses inside and underhood, as it's not uncommon for them to be on their own fuse(s)

Apr 25, 2009 | 2006 Jeep Liberty

Not finding what you are looking for?
2002 Jeep Liberty Logo

2,177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63990 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...