Question about 1993 Subaru Loyale

1 Answer

Subaru loyale wagon replacing the timing belt

Can you take off the mian pulley to your harmonic balance and remove the cover to the timing belt. to change the water pump and change belt and oil pump.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 110 Answers

Get a proper manual like Haynes (amazon, parts store, Haynes.com).  You should not have to take either main pullel or cam pulley off to change timeing belt,  you DO want a new tensioner and and new idler pulley (if there is one).  Failure to replace these may result in a later failure that wipes out the blet, and possibly the motor (if it is an interference motor).
If you can change the oil pump from working on the front side of the motor, you are either a magician or a contortionist;!) and I need you to help me work on my car;~)    It's pretty rare for an oil pump to go bad before 400K km or 300K miles  ... the bloddy things are in a constant bath of oil!

Posted on Nov 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is the harmonic balance eating into the timing cover?


On most vehicles today, the crankshaft pulley acts as the harmonic balancer. It also has the grooved outer ring that the serpentine belt rides on. Between the central hub of the balancer and the outer ring is a strip of rubber that the outer ring is pressed onto. This rubber, over time, ages and shrinks. This allow the outer ring to walk inward (or outward) of the centerline of the pulley. This causes the serpentine belt to wear out prematurely and can cause the problem you describe. You need a new harmonic balancer. It comes complete with the rubber and outer ring already attached. Check your belt at the same time to see if it needs replaced as well.

Oct 22, 2015 | Cars & Trucks

1 Answer

How to change a timing chain tensioner on 2002 ford explorer


Pull your Serpentine belt, remove the Cam Belt Cover, (it may be advantageous to remove front wheel in the Cam Belt side) Remove the timing belt and time the engine to specifications, make sure you are on #1TDC, remove the tensioner and replace. if there is and Idler pulley replace that as well. You can use Spray Carb Cleaner to clean the pulleys before replacing the belt. Note, you may have to also remove the Harmonic Balancer and pulleys from the crankshaft.

Apr 28, 2014 | 2000 Ford Explorer

1 Answer

Harmonic balancer remove replace


i dont think is your harmonic balancer that dont make any sound check all the pulleys cose to change the harmonic ba... you havto remove and change your crank pulley along with it

Jan 29, 2014 | Plymouth Cars & Trucks

1 Answer

How do i repair oil leak


yes, you will need to remove that plat as well as the harmonic balancer. if you do not have a harmonic balancer pulley puller your local parts house should have one. you will also need a new timing belt as the old one will have been stretched if not recently, within the past few days, been installed.

Nov 12, 2011 | 1994 Nissan Pathfinder

1 Answer

Does the harmonic balancer need to be removed to replace the water pump?


Hello mue037,

Yes, the harmonic balance pulley must be removed as well as the timing belt. The water pump is driven by the timing belt.

Regards,
netvan

Feb 27, 2011 | 1999 Chrysler 300M

1 Answer

How to remove the timing chain plate


Take the shroud & fan off , loosen alternator and air conditioner remove belts, remove belt pulley off face of water pump, drain radiator, remove water pump, remove belt off harmonic balancer, then pull harmonic balancer off of crank shaft, remove bolts from timing cover, and that will get you to the timing chain plate take the bolts out and remove it.

Feb 20, 2011 | Chevrolet Cavalier Cars & Trucks

3 Answers

Timing belt broke and need timing marks diagram 2.2 subaru


the timing marks are on the camshaft pulleys and there are 2 notches on each pulley> they line up with 2 marks on the engine block for each pulley> and the crankshaft has a notch that lines up with a mark on the engine block aswell> pluss the new timing belt will have white marks on it that will line up with all of the marks on the pulleys when they are in the right place so its nearly impossable to do it wrong

Apr 07, 2010 | 1997 Subaru Legacy

2 Answers

Crankshaft Pulley..98 Subaru Forester


just a socket set will do the job.But remove the bolt and put thread lock-tight on the threads and tighten to manufacturers toque

May 30, 2009 | 1993 Buick Park Avenue

1 Answer

Siezed idler pulley


tension chk aways between ALT and CP (harmonic balancer) and yes the idler (tensioner) is below the AC compressor. Recommend you replace it if seized.

Apr 01, 2009 | 1992 Subaru Loyale

1 Answer

Info on replacing water pump on Subaru Legacy and how much work there is attached. Also on 1992 wagon is there a rotor for the spark or is there just a coil. Cheers Terry


The water pump is run by the timing belt.Involves the draining the antifreeze,removing the radiator/condensor fan motors,harmonic balancer,alt./ac./p.s. belts, timing covers and timing belt.Along with a new pump,a new timing belt should installed.Timing marks are critical and it should be repairer by a garage.Should take about 1 to 2 hours or so to do if everything comes apart easy.Also there is no cap or rotor,only a coil pak.Hope this gives you a better idea.

Mar 03, 2009 | 1992 Subaru Legacy

Not finding what you are looking for?
1993 Subaru Loyale Logo

1,242 people viewed this question

Ask a Question

Usually answered in minutes!

Top Subaru Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Subaru Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...