Question about 2000 Jaguar S-Type

1 Answer

Passenger front window off track. need to remove door panel to access can anyone give suggestions.

Posted by on

  • Anonymous Mar 09, 2009

    driver door window off track

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Replace window regulator

Posted on Nov 11, 2008

  • auto glass Nov 11, 2008

    replace window regulator

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My front passenger door will not open or unlock. I have a 2007 Focus. How do i access the door panel to fix the lock?


If you use whats called a slimjim and slide it down on the far left outer side of the window you can access the accuater lever or rod for the door. Any autozone are police officer can show you exactly how to do it. It's real easy.

Mar 28, 2014 | 2007 Ford Focus (3 Door) Hatchback

1 Answer

Passenger side window


I need to change my passenger side window in my Hyundai i30. I have removed all the plastic front cover and unbolted the metal covering but I can't remove it to get access to the window and the tracking device. It is getting caught on the top lefthand corner. I don't want to force it so what is your suggestion please.
Kind regards

Roberto

Jan 07, 2014 | Ford Crown Victoria Cars & Trucks

1 Answer

Cable system on passenger door power window, 1999 dodge Caravan, has slipped off track. Need exploded diagram to restore to original.


REMOVAL

1. Remove the watershield. (Refer to 23 - BODY/DOOR - FRONT/WATERSHIELD - REMOVAL)

2. Remove door glass retaining clips and secure the window in the up position using masking tape or equivalent(FRONT DOOR GLASS CLIPS).

3. Disconnect wire connector from power window motor, if equipped.

4. Loosen screws attaching front and rear window guide rails to inner door panel (FRONT DOOR MANUAL WINDOW REGULATOR - TYPICAL).

5. Remove screw heads on guide rails from key hole slots in inner door panel.

6. Loosen screws attaching regulator to inner door panel.

7. Remove regulator from inner door panel.

8. Extract rear guide rail through inner door panel rear access hole (FRONT DOOR POWER WINDOW - TYPICAL).

9. Extract front guide rail through front access hole.

INSTALLATION

1. Insert front guide rail through front access hole.

2. Insert rear guide rail through rear access hole.

3. Place window regulator in position on inner door panel.

4. Place screw heads on guide rails in position through key hole slots in inner door panel.

5. Tighten screws to attach front and rear guide rails to inner door panel.

6. Connect wire connector into power window motor, if equipped.

7. Install door glass.

8. Verify door glass alignment and operation.

9. Install sound shield and door trim panel


DIAGRAMS CAN BE FOUND ON JUSTANSWER,COM

Sep 02, 2012 | 1997 Dodge Grand Caravan

1 Answer

How do i replace rear passenger window


Did they break the larger window? or the smaller one?
The larger one is the easy one, remove the door panel, adjust the window mechanism until you can see the bolts on the bottom window track, undo these bolts and remove the old track, To fit the new window it's simply a matter of removing the side window guide rail and sliding the window in on an angle and wiggle it around until you get it inside the door, the seat it in the rail and replace the guide rail. Then bolt the window to the mechanism and re-assemble the door panel.

If it's the smaller one you need to remove the larger window first then remove the frame between the smaller and larger piece of glass, You can then replace the glass.

I would suggest calling around and you may get a good price for an expert to replace it as it is a pain to do.

Mar 13, 2012 | 2003 Mazda Protege

1 Answer

Passenger window on 2001 ford focus has dropped off track, how do i fix this


Remove the door panel anytime you have
window issues & they fall down or make a
noise & don't move

When you get access to the inner door panel,
you will see the problem

Not off any track, the regulator broke

Jun 16, 2011 | 2001 Ford Focus

1 Answer

How do I realign the passenger side window?


WINDOW GLASS REMOVAL

NOTE: Window glass must be operable in order to remove door assembly carrier. Any malfunction that prevents the window (manual or power) from being lowered must be corrected before proceeding.

  • Remove door trim panel.
  • Pry out sealing plugs in door assembly carrier to gain access to window glass securing bolts.
  • Lower window until window glass securing bolts are accessible.
NOTE:
If the power window motor is not working it can be renmoved to allow the window to be slid down.

  • Loosen window glass securing bolts and carefully press glass securing clamps apart.
NOTE:
If glass is being replaced due to breakage, remove door assembly carrier and remove broken shards of glass to prevent rattling noises in door.

  • Carefully lower the window regulator.
  • Lift window glass up and pivot forward, starting at the taller end of the glass. Pivot forward towards the direction of the side mirror.
  • Place removed window glass in a secure location.
WINDOW GLASS INSTALLATION

  • Slide forward part of window glass into opening and pivot glass downward, reversing the removal proceedure.
  • Raise window regulator until window glass securing bolts are visible in access holes on door assembly carrier.
  • Gently press window in the direction of the door latch or highest part of glass and tighten securing clamp bolts.
  • Remainder of installation is the reverse of disassembly.
  • Check operation of window before final installation of door trim panel.
TIGHTENING TORQUE
Window glass securing bolts...........10Nm (89in-lb)

Jun 25, 2010 | 2000 Volkswagen Beetle

1 Answer

Front passenger window not working. Need instructions to remove door panel to access window motor.


It could be as simple as a fuze...or your power window switch needs to be cleaned.

If not

there should be screws located inside the handle and other areas on the door panel, undo all those first,
The door panel itself is held on with plastic clips, you can use a flat head screwdriver and gently start at the bottom of the panel/door and work your way around the door undoing all the plastic clips by pulling gentle.
Dont forget to unscrew your power window switch and unplug when removing the panel


Jan 29, 2010 | 2006 Dodge Grand Caravan

1 Answer

Fallen driver's side window


probably need a new window regulator. ebay. 93 to 98 should fit.

Section 01-05: Trim, Interior 1998 Villager Workshop Manual
REMOVAL AND INSTALLATION Trim Panel(s), Door Front
Removal
  1. Disconnect the battery ground cable (14301) if equipped with power locks or power windows.
  1. swv~us~en~file=ani_caut.gif~gen~ref.gif CAUTION: Use care when removing the front door inside handle escutcheon (22620). Failure to do so can result in damage to the component.
    Carefully pry off the front door inside handle escutcheon by inserting a standard 1/4 inch screwdriver between the top rear portion of the front door inside handle escutcheon and the front door trim panel (23942) .




  1. If equipped with manual windows, slip a clean shop rag between the window regulator handle (23342) and the front door trim panel .
  1. Pull the shop rag back and forth to release the window regulator handle clip.




  1. Remove the three cover caps and front door trim panel screws.
  1. Remove the one front door trim panel capped screws from the door pull handle.
  1. If equipped with power windows, remove the door pull handle. Disconnect the electrical connectors.
  1. Slide a flat-bladed tool behind each of the retainers and twist the tool to disengage the front door trim panel from the front door (20124) .
  1. Remove the front door trim panel.
Installation
To install, reverse the removal procedure.
---------------------------------------------------------
Window Regulator, Power Front Door
Removal
  1. Disconnect the battery ground cable (14301) .
  1. Remove the front door window glass (21410) . Refer to the front door window glass removal procedure in this section.
  1. Remove the two front door brace bolts and the front door brace.


    415712f.gif

  1. Disconnect the front window regulator electric drive electrical connector.
  1. Remove the four front door window glass regulator track bolts.

    67b6136.gif


  1. Remove the three front window regulator electric drive bolts.
  1. Remove the front door window glass regulator track and the front window regulator electric drive (23394) as an assembly through the opening in the front door (20124) .
Installation
  1. Install the front door window glass regulator track and the front window regulator electric drive as an assembly through the opening in the front door .
  1. Install the three front window regulator electric drive bolts. Tighten the front window regulator electric drive bolts securely.
  1. Install the four front door window glass regulator track bolts. Tighten the front door window glass regulator track bolts securely.

Apr 29, 2009 | 1998 Mercury Villager

1 Answer

Fix front passenger window in a 2001 Alero


Sounds like it is Off Track. You will need to remove the Door Panel. There are Access holes in the Door so that you can get it Back on Track.

Jan 10, 2009 | 2001 Oldsmobile Alero

4 Answers

Door window on 2000 jaguar s type


take off inner door panel, lower track and put the window back in. If parts on track are broken buy new ones. Use urathain to reinstall window.

Jul 28, 2008 | 2000 Jaguar S-Type

Not finding what you are looking for?
2000 Jaguar S-Type Logo

424 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

447 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...