Question about 1990 Ford Bronco

1 Answer

Turn on ignition & nothing happens

Changed out steering column.installed new ignition switch.have been told there was a fuse going to transmission that would cause this problem.thanks for any help.

Posted by on

  • Anonymous Mar 30, 2014

    Ignition switch problems

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Have you checked the starter?

Posted on Nov 29, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Windshield wipers wont turn off, changed switch, motor, and even got a different steering column still runs as soon as you turn the key.


the fault must be in the wiring, you hav'nt said vehicle etc , have you replaced the relay as well , usully under bonnet fuse box but as dont know vehicle can't be specific

Nov 07, 2014 | Cars & Trucks

2 Answers

Okay, my boyfriend owns a 2000 ford f-250 super duty and your prolly wondering as to why im asking about this instead of him ... well im more mechanically inclined then he is lol funny huh... okay heres...


It sounds like the shift tube bushings are worn out. There are usually 2 u shaped clamps that have nylon bushings that hold the shift tube to the steering clumn. If loose, that throws off the shift position, could be btween 2 gears at once, and throws off the park - neutral safety switch. Fix that first.


snorkelbobby_53.gif Item Part Number Description 1 14A664 Air Bag Sliding Contact 2 3530 Upper Steering Column Shroud 3 3518 Steering Column Bearing Sleeve 4 3517 Steering Column Bearing 5 3511 Steering Column Lock Cylinder Housing 6 13K359 Multi-Function Switch 7 N808114 Pin 8 N805857 Steering Column Release Lever Pin 9 3D544 Steering Column Release Lever 10 3F609 Tilt Wheel Handle and Shank 11 7361 Column Shift Selector Lever Plunger 12 7210 Gearshift Lever 13 3D657 Steering Column Shaft 14 7B071 Transmission Control Selector Lever Plunger Spring 15 7G357 Gearshift Lever Pin 16 7212 Transmission Column Shift Selector Tube 17 N806582 Tilt Column Pivot Screw 18 7C464 Transmission Control Selector Lever Spring Clip 19 7E400 Gearshift Tube Bushing Clamp 20 - Spacer (Fixed Column) 21 3E729 Steering Shaft (Fixed Column) 22 3F527 Lever Assembly (Manual Transmission) 23 3F530 Pin (Manual Transmission) 24 3F752 Brake Shift Interlock Solenoid 25 7335 Gearshift Lever Socket Bushing 26 7A216 Transmission Shift Selector Position Insert 27 7302 Transmission Selector Lever Arm and Support 28 7E395 Shift Cable and Bracket 29 7210 Gearshift Lever 30 3E691 Steering Column Shift Lock Pawl 31 7W441 Gearshift Lever Pin 32 3676 Steering Column Instrument Panel Bracket 33 3D681 Steering Column Lower Bearing Retainer 34 3517 Steering Column Bearing Sleeve 35 3L539 Steering Column Bearing Tolerance Ring 36 3C674 Steering Column Lower Bearing Spring 37 3C131 Sensor Ring 38 3518 Steering Column Bearing 39 N806423-S56 Steering Column Retaining Nuts 40 14A163 Wiring Harness Retainer 41 3F723 Steering Actuator Housing 42 3B663 Steering Column Lock Lever Pin 43 11572 Ignition Switch 44 3D655 Steering Column Position Spring 45 3D653 Steering Column Locking Lever (LH) 46 3B768 Steering Column Position Lock Spring 47 3B662 Steering Column Locking Lever (RH) 48 3E715 Lower Steering Column Lock Actuator 49 3E696 Steering Column Lock Spring 50 3E691 Steering Column Shaft Lock Pawl 51 3E723 Upper Steering Column Lock Lever Actuator 52 3E695 Steering Column Lock Cam 53 3D656 Steering Column Tilt Flange Bumper 54 14A163 Wiring Harness Retainer 55 391727-S304 Shroud Screws 56 3530 Steering Column Shroud 57 3E717 Steering Column Lock Gear 58 3E700 Steering Column Lock Housing Bearing 59 3C610 Bearing Retainer 60 11582 Ignition Switch Lock Cylinder 61 3L539 Steering Column Tolerance Ring 62 3520 Steering Column Upper Bearing Spring 63 3C610 Snap Ring

Apr 05, 2011 | 2000 Ford F250 Super Duty Crew Cabs

2 Answers

Ignition


the actuator inside the sterring column that the lock cylinder turns is boken, this is a very complex job and is not for the home tech without a factory service manual.

Apr 21, 2010 | 1996 Ford Taurus

1 Answer

How do i remove key lock cylinder on steering column to replace with new one?


Turn ignition key/lock cylinder to the ON position. Insert a thin screwdriver into the slot adjacent to the switch attaching screw boss (right-hand slot). Depress the spring latch located at the bottom of the slot to release the key/lock cylinder. Remove the cylinder.
to remove key-lock cylinder switch Ignition Switch

Removal & Installation

1. Disconnect the negative battery cable.
2. Remove the steering column shroud and lower the steering column.
3. Detach the ignition switch electrical hardness connector.
4. Remove 2 nuts retaining the ignition switch to the steering column housing.
5. Lift the ignition switch upward to disengage the actuator rod from the switch and remove the switch.


To install:

> When installing the ignition switch, both the locking mechanism at the top of the column and the switch itself must be in the LOCK position for correct adjustment. To hold the mechanical parts of the column in the LOCK position, move the shift lever into PARK (with automatic transmissions) or REVERSE (with manual transmissions), turn the key to the LOCK position, and remove the key. New replacement switches, when received, are pinned in the LOCK position by a metal shipping pin inserted in a locking hole on the side of the switch.


6. Engage the actuator rod in the ignition switch.
7. Place the ignition switch on the steering column housing and loosely install 2 retaining nuts.
8. Move the switch up or down along the column to locate the mid-position of the actuator rod lash, then tighten the retaining nuts to 47-64 inch. Lbs. (5-7 Nm).
9. Raise the steering column into position at instrument panel. Install steering column shroud.
10. Connect the negative battery cable.
11. Remove the locking pin, connect the battery cable, and verified that the engine will only crank in PARK and NEUTRAL. Also check to make certain the start circuit cannot be actuated in the DRIVE and REVERSE positions.
to get more help on this issue with more details. then please click on this link directly
http://www.ehow.co.uk/how_5880956_change-ignition-lock-cylinder.html
thanks.this will help.

Feb 20, 2010 | Chevrolet Cavalier Cars & Trucks

1 Answer

How do I replace a keyed ignition switch in my 85 f-250


Removal & Installation

403ff30.gif
Blade-type connector ignition switch on steering column, 1980 and later models

  1. Disconnect the battery ground cable.
  2. Remove steering column shroud and lower the steering column.
  3. Disconnect the switch wiring at the multiple plug.
  4. Remove the two nuts that retain the switch to the steering column.
  5. Lift the switch vertically upward to disengage the actuator rod from the switch and remove switch.
  6. When installing the ignition switch, both the locking mechanism at the top of the column and the switch itself must be in LOCK position for correct adjustment.
To hold the mechanical parts of the column in LOCK position, move the shift lever into PARK (with automatic transmissions) or REVERSE (with manual transmissions), turn the key to LOCK position, and remove the key. New replacement switches, when received, are already pinned in LOCK position by a metal shipping pin inserted in a locking hole on the side of the switch.
  1. Engage the actuator rod in the switch.
  2. Position the switch on the column and install the retaining nuts, but do not tighten them.
  3. Move the switch up and down along the column to locate the mid-position of rod lash, and then tighten the retaining nuts.
  4. Remove the locking pin, connect the battery cable, and check for proper start in PARK or NEUTRAL.
Also check to make certain that the start circuit cannot be actuated in the DRIVE and REVERSE position.
  1. Raise the steering column into position at instrument panel. Install steering column shroud.

Nov 19, 2009 | 1985 Ford F 250

1 Answer

How to change ignition switch


  1. Disconnect the negative battery cable.
  2. Remove the steering column shroud and lower the steering column.
  3. Disconnect the ignition switch electrical harness connector.
  4. Remove the 2 nuts retaining the ignition switch to the steering column housing.
  5. Lift the ignition switch upward to disengage the actuator rod from the switch and remove the switch.

To install:
When installing the ignition switch, both the locking mechanism at the top of the column and the switch itself must be in the LOCK position for correct adjustment. To hold the mechanical parts of the column in the LOCK position, move the shift lever into PARK (with automatic transmissions) or REVERSE (with manual transmissions), turn the key to the LOCK position, and remove the key. New replacement switches, when received, are already pinned in the LOCK position by a metal shipping pin inserted in a locking hole on the side of the switch.
  1. Engage the actuator rod in the ignition switch.
  2. Place the ignition switch on the steering column housing and loosely install the 2 retaining nuts.
  3. Move the switch up or down along the column to locate the mid-position of the actuator rod lash, then tighten the retaining nuts to 47-64 inch lbs. (5-7 Nm).
  4. Raise the steering column into position at instrument panel. Install steering column shroud.
  5. Connect the negative battery cable.
  6. Remove the locking pin, connect the negative battery cable, and verify that the engine will only crank in PARK and NEUTRAL . Also check to make certain that the start circuit cannot be actuated in the DRIVE and REVERSE positions.

Nov 19, 2009 | 1988 Ford F 250

1 Answer

Ignition switch replacment


Ignition Switch REMOVAL & INSTALLATION The ignition switch is located at the bottom of the ignition key cylinder body. To remove the ignition switch, first remove the ignition lock cylinder.

1993–99 Golf and Jetta
  1. Disconnect the negative battery cable.
  2. Center the steering wheel.
  3. Remove the air bag.
  4. Remove the steering column switches.
  5. If the vehicle is equipped with an automatic transmission, detach the shift lock cable from the lock cylinder housing.
  6. Remove the adapter sleeve from the steering column.
  7. Remove the spring and horn contact ring from the steering column assembly.
  8. Detach the sheer bolt.
  9. Insert the ignition key and unlock the cylinder, then detach the wiring connectors.
  10. Once all wiring has been detached, slide the housing off the steering column.
  11. Mark and drill the lock cylinder as shown and described in the above procedure.
  12. Compress the stop spring and pull the lock cylinder out of the steering column housing.
  13. Put the new lock cylinder into the steering lock housing.
  14. Insert the key into the lock cylinder.
  15. While you gently turn the key, insert the lock cylinder fully into the housing.
  16. The rest of the installation procedure is the reverse of removal. NOTE: Always use a new shear pin when installing the lock cylinder.

Jun 25, 2009 | 1998 Volkswagen Jetta

1 Answer

Wont start


make sure transmission is in park.

slide a stick or twig up underneath the steering column which will hold a specialized switch in place. Try the ignition. Should it start, the actual problem in the transmission interlock switch for the transmission [located in the center console] which also protects the ignition from turning on [secondary switch prior to the ignition switch]. What a ***** to have found... took me 8 hours but GM wanted 800$ for the fix.

Oct 11, 2008 | 2003 Pontiac Grand Am

1 Answer

Ignition


ther is a linkage between the key switch and the ignition switch that is under the dash on the steering column. it is called an accuator. i have been driving fords a long time and i have changed five of them since 1980 when ford put the switch on the column. you will have to start off by removing the steering wheel then yhe ignition switch and so on. it is tricky... but not bad..

Jun 16, 2008 | 1995 Ford F350

Not finding what you are looking for?
1990 Ford Bronco Logo

65 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...