Question about 2003 Jeep Wrangler

1 Answer

1998 jeep wrangler

My sons 1998 wrangler 5 speed with 85,000 miles. When driving it feels like the power cuts out at 2200 r.p.m. or there abouts . You can floor it but no matter what gear the shift light comes on and you loose power and must up shift just to get the same result in the next gear . I noticed it in 5th gear on the freeway last week, it would not let the vehicle go past 70 . My son 4 wheeled it the other day and now it is happening in all gears . Even in neutral when revving the engine the power starts falling away ar 2200 to 2500 r,p,m. No trouble lights or other problems

Posted by on

  • tony yeatman
    tony yeatman May 11, 2010

    did your model have rev limiter rotor in the distributor?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Sergeant:

    An expert that hasĀ over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 393 Answers

Shift tranny from 1st-3rd if engine revs up clutch needs replacing

Posted on Nov 11, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hello, I'm looking for a replacement for my jeep cherokee 99, the current part number is Chysler P56041 629AD, I found a Chysler P56041 278AD, can this computer works ok with my cherokee?


THE PCM MODULE.
no country stated, the 728ad shows Europe. (why?)
"I found"

where, at ebay, at pick-apart, or ?
USA cars have 11 PCM for one engine. fact.
and 100s more world wide.
what a question, just a p/n
then you post to grand Cherokee and then text leaving out Grand.?
why?
i searched the part at jeep and is wrangle part, 629ad.

you do know that it must be reprogrammed to your car right:?
the pcms on cars can vary
by engine, trans opted , 4wd/2wd,and year.
federal PCM
Calif PCM
and mexico PCM
and 9 more. just for 1999

is yours 42RE for 45RFE?? tranny??? 30/32 RH? what?
post county (or state if calif)
post engine and year
post body and not contradict.?
post drive line, in car, tranny and if 4wd?
then we can match it up
or call jeep.com

they (jeep) will do this magical thing!
ask you the VIN.
and then look it up in their database.
and see ALL THE ABOVE even what radio is in it. of 5.
me, im a glass half full guy (hard knocks, reality stuff)
id not even believe the part in car is correct.
im too SAVVY !
i find out from jeep what it should have first.

not one matches the 4.0L in the GC.


the 629 posted shows this at jeep.com

JEEP WRANGLER 2.5L Power Tech I-4 Cyl., 3-Spd. Automatic 30RH 1998
JEEP WRANGLER 2.5L Power Tech I-4 Cyl., 5-Speed Manual 1998
JEEP WRANGLER 4.0L I6 Power Tech, 3-Spd. Automatic 32RH 1998
JEEP WRANGLER 4.0L I6 Power Tech, 5-Speed Manual 1998
(if true needs to be programmed to each)

the send number
56041 278AD

lands at.
(part not found, is this a non usa part?) im stumped

was fun to try.
but im stumped.

Mar 31, 2016 | 1999 Jeep Grand Cherokee

1 Answer

I own a 98 Wrangler Spt, 5 speed manual tranny, with 85,000 miles. Driving home from work last week on the highway at approximately 70 MPH the vehicle completely lost power and coasted to a stop. Kind...


I would look at the ignition system. Possibly a faulty ignition module or coil ( if you have a single coil ) Multiple it will generally be one coil that goes bad and results in a misfire code. Or if it's the ignition module it might not throw a code at all, And it might test fine if it's had a chance to cool down before it's tested.

Jan 21, 2011 | Jeep Wrangler Cars & Trucks

1 Answer

Need routing diagram for serpentine belt - '98 Jeep Wrangler, straight six with and without A/C


Click of the following direct, Free Link. It has several Serpentine Diagrams, including the one for your 1998 Jeep Wrangler 4.0L In-Line 6-Cylinders based upon your Engine Options (AC/No AC, Power Steering/No Power Steering, etc.).
The Link Page ALSO has the 2.5L In-Line 4-Cylinder Serpentine Belt Diagrams with their various engine options.
Included are the with AC / without AC Routing.

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!
http://www.2carpros.com/car_repair_information/year/1998/make/jeep/model/wrangler/1998_jeep_wrangler_drive_belt_routing_diagram.htm

Apr 13, 2010 | 1998 Jeep Wrangler

1 Answer

After going 5 or 6 miles jeep starts kickin back .


could be many things, it could be looseing fuel preasure or coil spark gets weak or bad plug wires,

Dec 13, 2009 | 1995 Jeep Wrangler

1 Answer

95 wrangler yj. has no power at high speeds


Have you had fuel pressure tested, and/or filter changed. Have you checked for plugged exhaust, such as catalytic converter? Quite often engine will also run a little hotter than normal when exhaust is plugged.

Nov 05, 2009 | 1995 Jeep Wrangler

2 Answers

97 jeep wrangler 2.5 auto, backfire and loss of power on warm day


COULD BE DIFFERENT THINGS BUT I RECOMEND TO HAVE IT CHECK WITH A GOOD SCANNER TO FIND OUT TROUBLE CODES BEFORE BEGIN SPENDING MONEY

Sep 24, 2009 | 1998 Jeep Wrangler

1 Answer

Jeep Wrangler 1998 straight drive has difficult times going into reverse gear. I don't drive it every day,usually towing it behind my RV. It seems better when I drive it more,but is still difficult to...


if this is a 5 speed manual transmission...all you need to do before putting your jeep into reverese is puting it into first gear and then shifting it to reverse to avoid any grinding or problems shifting into reverse...this isn't a problem just a poor jeep design by not installing an extra gear to eliminate this grinding or shifting problem

Mar 26, 2009 | 1998 Jeep Wrangler

1 Answer

1998 Jeep wrangler s/spot stuck in 4 wheel drive


This sounds like the linkage could have fallen or broken off. Have someone move the 4wd shifter while you look under the vehicle.

Feb 06, 2009 | 1998 Jeep Wrangler

Not finding what you are looking for?
2003 Jeep Wrangler Logo

377 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...