Question about 2004 Mitsubishi Endeavor

1 Answer

Battery Problem maybe?

I recently had a new battery installed in my 2004 Endeavor, but now when I go to start it , it won't start. The place that installed it fixed the problem, but it seems to be not a solution all the time. It will start over and over again before not starting after sitting over night. The battery was tested and has full power. Alternator was tested and full charge...My step dad and myself took off the cables and cleaned rigoriusly and it started, but this morning it did it again. I open the hood and wiggle the cable and what do you know it starts. What could the problem be?

Posted by on

  • Andy Bathgate
    Andy Bathgate May 11, 2010

    which battery cable, red or black?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 94 Answers

You haven't explained if engine is turning over when you say "wont start" if it wont turn over,could be starter motor sticking, when you say wiggle cable do you mean battery leads
if red , clean connection at starter motor/solenoid

Posted on Nov 02, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a way to reset keyless entry for 04 endeavor?


Search Results

    2004 Mitsubishi Endeavor Key Fob Remote Programming ...

    blog.keylessentryremotefob.com/.../04/2004-mitsubishi-endeavor-key-fo...
    Apr 25, 2013 - 2004 Mitsubishi Endeavor Key Fob Remote Programming Instructions ... you might have visit us at Keylessentryremotefob.com You can also ...

    Mitsubishi - Free Keyless Remote Fob Entry programming .

    How To Replace Mitsubishi Endeavor Key Fob Battery 2004 ...

    ? 2:04
    www.youtube.com/watch?v=yeQRdre7O0Q
    Oct 31, 2014 - Uploaded by Keyless Entry Remote Inc
    ... will show you How To Replace Mitsubishi Endeavor Key Fob Battery 2004 2005 To Order This Remote ...

Nov 01, 2015 | Cars & Trucks

1 Answer

How to find the radio code for 2004 Mitsubishi Endeavor radio has no sound after replacing dead battery


Depending on the make you can go online, search the make/model/serial number on specialist website that will sell you the code for a couple of bucks. As you didn't provide this in your question I couldn't test run it for you. Serial number may be in the drivers book or remove radio and it will be on the back. Has nobody written it in the owners books anywhere? Next time hook up a small motorcycle battery to your main batt leads before you remove the main batt and this will keep the codes in place while you swap the main batt.

Sep 05, 2014 | 2004 Mitsubishi Endeavor

2 Answers

Windows on the passanger side front and back won't work, up or down


some of these newer cars have an electrical cut out made into the system so it childproofs the controls..this option may have failed entirely on your vehicle.. its usually a switch or relay issue..I have found in my experiences with auto electrical that if you attach a battery charger to the car in place of the battery itself(disconnect it entirely) that some relays will buzz if they are stuck or not working right..try this and see what it does..

Feb 15, 2013 | 2004 Mitsubishi Endeavor

1 Answer

Car won't start. New battery installed recently. Only clicks when trying to start.


one single click any time you turn the key usually indicates a bad solenoid on the starter. A new starter will typical get you going.

A series of rapid clicks when you try to start usually indicates a weak battery. There could also be a bad connection at the terminals on the battery or even a poor connection at the starter.

If you get a single click and everything goes dead for a couple of seconds than you definitely have a bad connection at the battery.

Let me know what you find or if you have any questions.

Dec 28, 2011 | 2007 Chevrolet Tahoe

1 Answer

2004 mitsubishi endeavor - I changed the battery 2 days ago. I changed it as the car seemed as though the battery was going out, somewhat hard to turn over only at times. 2 hours after changing it, the...


hello allen team it seems to me that either your alternator isnt working properly and you will notice the battery light on andn it wont charge battery or you have bought the wrong battery as far as cranking amps i just bought the battery for my 04 endeavor and it had to be a 750 cca meaning cold cranking amps try to make absolutly shure that you have the right one there for the battery puts out the right amperage thus able to start the vehicle bye turning the starter motor at the corect rpm

Oct 19, 2011 | 2004 Mitsubishi Endeavor

1 Answer

Bought key fob but don't know how to program them


recently the key fob on my 2004 mitsubishi endeavor stopped working after I replaced the vehicle battery. How do you program the key fob to start the vehicle?

Jun 11, 2010 | 2004 Mitsubishi Endeavor

1 Answer

2004 Endeavor


Most likely the computer thinks the car has been stolen and will not let it start. You will need to take it to the dealer and the will have to reprogram the computer and unlock the security system. Hope this helps.

Aug 10, 2008 | 2004 Mitsubishi Endeavor

Not finding what you are looking for?
2004 Mitsubishi Endeavor Logo

345 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...