Question about 1995 Ford Explorer
You need to clear the codes from the ECM, and re-run diagnostic code. If you still have codes
Check your grounds. If you still have power issues, re-check your wiring or firing order. If you have spark only on 2-4-6, where is your 1 - 3 - 5. If I remember correctly those vehicles have double ignition modules. One for the right bank and one for the left bank. But not sure. When was the last time you change your spark plug wires? Your PCV? Fuel Filter? Air Filter?. As for your cam shaft sensor, run a coninuity test on the harness and ensure is working correcty. Why did you change the ECM, those things hardly go bad, unless you disconnected it while you had power going to it. Probably nothing wrong with the old one.
Ensure you don't have vacuum leaks (PCV Valve, EGR Valve) Check your fuel pressure if you can. Suggest you change fuel filter. Could be partially clogged and not allowing the proper atomization of fuel. (Also did you gap your plugs correctly or just threw them on as is?)
Posted on Oct 31, 2008
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Jun 19, 2017 | Ford Cars & Trucks
Sep 28, 2016 | AC Cars & Trucks
Dec 25, 2015 | Ford Cars & Trucks
Here are the most common causes of idle surge, rough idle esp when cold, other symptoms include stalls at stops, slow idle speed, erratic idle speed, rough idle and engine hesitation (and other problems), it is in most cases the idle speed control air-bypass valve and or throttle valve and upper intake, these area's get full of gunk and combustion residue over the miles and cause idle issues (stalls, low idle) like yours, Get a can of intake cleaner from any local parts store, not carb spray, intake cleaner, it is made by a company called CRC, remove the air intake hose to the engine, hold the idle high so the engine won't stall, then spray the can of cleaner into the intake while keeping the engine running, use at least 1/2 the can, shut down the engine and disconnect the battery for 5 minutes, then restart and complete a number of mixed driving cycles, town, freeway, stop and go etc., after a few days the problem will go away as the system will relearn to the clean intake
Jul 09, 2017 | Cars & Trucks
will not idle when cold?
runs lean and idles rough?
Engine stumbles coming off idle when warm?
Erratic idle on car?
Low idle when cold out side?
Idle Air Control (IAC) Valve Replacing?
Engine quits at idle?
Car overheats and Air blows hot at idle?
While stop engine idles like cylinder missing?
This will help.
Mar 03, 2012 | 1999 Suzuki Esteem
Car overheats and Air blows hot at idle? http://howtobyme.blogspot.com/2011/11/car-overheats-and-air-blows-hot-at-idle.html
------While stop engine idles like cylinder missing? http://schematicsdiagram.blogspot.com/2012/01/while-stop-engine-idles-like-cylinder.html
---------This will help.Thanks.
Feb 26, 2012 | 1999 GMC Savana
Nissan Pathfinder Backfires? http://technoanswers.blogspot.in/2012/02/nissan-pathfinder-backfires.html
---------How to adjust rpm? http://schematicsdiagram.blogspot.com/2011/12/how-to-adjust-rpm-on-2009-dodge-charger.html
------------Engine cuts out at 3000 RPM? http://schematicsdiagram.blogspot.com/2011/12/engine-cuts-out-at-3000-rpm.html
----------This will help.Thanks.
Feb 17, 2012 | 1992 Nissan Pickup
Nov 03, 2009 | 1996 Ford Explorer
Apr 16, 2009 | 1999 Ford Explorer
Aug 26, 2008 | 2002 Ford Explorer
236 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: