Question about 1997 Ford Taurus

1 Answer

Help 1997 Ford Taurus

Had tod to machanic cause brakes would not work rod or something behide booster broke, had 2 day part came from ford got back today and blinkers or hazard lights do not work. Now they say electrical. Help any suggestions

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 424 Answers

Do the brake lamps work? If they don't check for blown fuses. The brake lamp switch may have shorted when the booster was replaced.

Posted on Feb 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove a master brake cylinder on a 2000 ford taurus


Use line wrenches if possible,but a good open end will probably work to loosen lines.Use a socket to loosen mounting bolts and remove the cylinder straight forward.
The lines should be plugged to keep out dirt and air.Use golf tees or rubber boots that are made for vacuum lines to keep dirt out.
If replacing the master cylinder,make sure the piston end is the same distance into the booster as the old one.If there's a difference,you can adjust the actuating rod on the booster so it's the same.Bolt it back on,attach the lines,fill with fluid and there is probably a bleeder screw on the cylinder.Always bleed brakes with 2 people.As the person pushes the brake down,the mechanic loosens the bleeder,then tightens it before the person lets the pedal up.Repeat this a coupla' times, and do a 4 wheel brake bleed to purge all air,whi.le you add brake fluid all the while when needed.Do not EVER let the master cylinder go dry while bleeding this way(the old fashioned way) Protect your eyes while bleeding fluid. don-ohio

Oct 02, 2011 | 2000 Ford Taurus

1 Answer

1997 ford taurus losng brake fluid. No visible leak


If your not finding leaks at the wheels remove the master cylinder from the power booster and look for a leak there. You don't need to disconnect it, just the two nuts holding it on and then very easily move it away far enough to see.

Oct 17, 2010 | 1997 Ford Taurus

2 Answers

How to know if my brake booster or my master cyclinder is the problem on 1997 ford expedition? My brakes don't go to the floor when they wanna fail but I hear a sound near my dash where I'm driving, it...


If you have drum brakes, check to make sure the wheel cylinders are not leaking, if they are not i would throw a master cylinder in the vehicle because its not the brake booster, all the brake booster does is provide assistance for braking making it easier for you to depress the pedal.

Apr 28, 2010 | 1997 Ford Expedition

1 Answer

How do i replace a power brake booster on a 97 ford taurus


  1. Step 1 Mark the brake lines coming into and out of the master cylinder using masking tape and permanent marker.
  2. Step 2 Orient the tube wrench so that it grabs the end of the nut by first sliding it over the brake line.
  3. Step 3 Pull the brake lines out of the master cylinder.
  4. Step 4 Unbolt the two bolts that hold the master cylinder to the brake booster.
  5. Step 5 Slide the master cylinder off the brake booster.
  6. Step 6 Remove the bolts that hold the brake booster to the firewall.
  7. Step 7 Remove the cotter pin from the pin holding the back of the brake pedal to the master cylinder.
  8. Step 8 Slide the brake booster to brake pedal pin out of the mounting bracket.
  9. Step 9 Pull the brake booster off the firewall.
  10. Step 10 Install the new brake booster. Installation is the reverse of removal.

Apr 24, 2010 | 1997 Ford Taurus

1 Answer

On a 1994 Ford Taurus, how do I know if the brake


put foot on brake hard then start the car the pedal should sink to the floor if the servo is working, thanks jezza

Feb 15, 2010 | Ford Taurus Cars & Trucks

1 Answer

How do u get the spring from the back brake on a 1997 for taurus back on after u have drained the brake fluid??


WHAT the hell are you talking about as you dont do any thing like taking off springs to bleed brakes as the bleeder is on the back of the cylinder and bleeding takes 2 minutes only

Ask for info befor you start playing it will save you days of work

Sep 23, 2009 | 1997 Ford Taurus

1 Answer

1998 Ford Taurus/ Brake lights are not working.


most likely cause is that the multifunction switch is defective on the steering column. MOTORCRAFT Part # SW5599 Price $96.00

here is a photo.
0f44681.jpg .

Apr 27, 2009 | 1997 Ford Taurus

1 Answer

1989 ford thunderbird std brake system vacuum booster install?


There are a Couple of Different Variations on the Boosters. Make sure that you have the Correct one First. If you do, Just work it, Some of the Rods are Removeable by the Way.

Jan 21, 2009 | 1989 Ford Thunderbird

1 Answer

How do you change a power booster assembly on a 2002 ford taurus


1st go inside the car and remove the rod from the brake pedal that actuates the booster, then look around where that rod goes through the firewall wall, there are 4 studs with nuts on them with, the rod is centered between these studs, sound deadener material may have to be removed to get at the nuts, once that is done, go out under the hood and unbolt the the brake master cylinder from the booster, there are 2 nuts on studs, move the master off to the outside by GENTLY bending the brake lines attached to it, unplug the large 3/8" vacuum hose from the booster and remove the booster, they can be hard to remove, and some other parts like wire harnesses and brackets may have to be pulled out of the way.

Nov 26, 2008 | Ford Taurus Cars & Trucks

1 Answer

I NEED HELP with my battery always dieing


bad ground causing the alternator to short out.. check the ground at the battery first also have the battery checked a shorted cel can cause this

Oct 15, 2008 | 1997 Ford Taurus

Not finding what you are looking for?
1997 Ford Taurus Logo

199 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...