Question about 1989 Toyota Corolla 2 Door

1 Answer

Timing 89 toyota corolla

How do i adjust the timing

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 18 Answers

Wy do you want to do it, but you can do that lossing the distribuitor screws and turning the distribuitor

Posted on Nov 02, 2008

3 Suggested Answers

  • 2 Answers

SOURCE: Replaciing serpentine belt on 2006 Toyota Corolla

You'll have to remove the engine cover under the bottom so you can position the new belt on the pulleys properly. Get a wrench or tensioner tool and turn the tensioner clockwise to relax the drive belt. Don't apply excessive force.

It's hard to draw a picture with words, but looking at the engine from the passenger side of the car, there are basically two top pulleys, two middle, and two bottom. The drive belt goes around the outside of the two top and two bottom, and on the inside of the two middle.

Posted on Nov 07, 2009

starlet4life
  • 89 Answers

SOURCE: Adjust valve clearances 1987 toyota corolla

Im assuming its an 4AGE!?
http://www.ae92gts.com/ae92gts_valve_adj.html
And here one of my favorites...;)
http://www.billzilla.org/4agstock.htm

Posted on Oct 07, 2008

roniecon
  • 6826 Answers

SOURCE: 1984 toyota corolla 1.6 engine. How do i adjust

Carbureted models have a fast idle cam on the throttle,It is a screw that sets against a movable part,called the cam,when the engine heats up,the cam will drop upon tapping the gas pedal.Set the carb,while the engine is cold,by tapping the gas pedal,then adjust the fast idle cam screw by turning it in,with the engine running.Start out by turning the screw in a full turn before starting engine so it will run,then adjust the screw as the engine runs.

Posted on Nov 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

89 corolla all trac wagon, if the t-belt goes, does that bend the valves?


In my book--- toyota corolla 1984-1993 , if the belt fails then the valves will be bent

Dec 28, 2014 | 1989 Toyota Corolla

1 Answer

I need 1989 Toyota Corolla 1.3 carburetor wiring diagram, please. :)


are you sure about your year
all US corolla manuals I have show the 89 corolla were fuel injected

Jul 27, 2010 | 1989 Toyota Corolla 2 Door

1 Answer

Need valve clearance for 89 toyota hiace


long time since i done on but about 12/14 inlet and 16/20 exhaust

Aug 25, 2009 | 1989 Toyota Corolla 2 Door

1 Answer

Hard to start in morning


if it is carburated you need to adjust the fast idel and the choke if it is fuel injected try checking the temp on the coolant temp sensor with a scanner the temp might be reading wrong if it is differant than ambiant temp in the morning change sensor

Aug 15, 2009 | 1989 Toyota Corolla 2 Door

1 Answer

Clutch adjustment for toyota corolla 1984


the clutch is hydraulic and self adjusting, if it is slipping then it is time for a clutch, the sign of a worn clutch is the clutch engages when the pedal is near the top of its travel when u let it out

Apr 12, 2009 | 1984 Toyota Corolla

2 Answers

Request for the wiring diagram for a 1989 UK spec Toyota Corolla Hatchback


Sure. Glad to provide assistance.

89 Corolla radio wiring colours:

Power- Solid GREY -
from the 7.5 amp RADIO fuse

Backup power - BLUE w/YELLOW tracer
from the 10 amp DOME fuse

RF speaker - LIGHT GREEN and BLUE
LF speaker - PINK and VIOLET
RR speaker - RED and WHITE
LR speaker - BLACK and YELLOW
Ground/Earth - BROWN

The graciousness of a FixYa rating would be greatly appreciated.

Jan 19, 2009 | 1989 Toyota Corolla 2 Door

1 Answer

I changed rear brake pads need adjustments manual they smoke


you need to adjust them yourself first,crank them out a little at a time till you can not spin the drum but not to tight after that the self adjuster will keep them adjusted

Dec 05, 2008 | 1985 Toyota Corolla 2 Door

3 Answers

Breaks


Your 89 Corolla has drum brakes at the rear.
The graciousness of a FIxYa rating would be greatly appreciated.

Nov 10, 2008 | 1989 Toyota Corolla 2 Door

1 Answer

Metallic rattle during acceleration


Try moving up 1 grade of fuel, if you are using 87, put in 89. See if this helps.

Jul 18, 2008 | 1999 Toyota Corolla

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...