Question about 2005 Infiniti G35

1 Answer

Change a headlight bulb

I am having a difficult time find a replacement bulb and getting information on how to install it.

Posted by on

  • Anonymous Nov 26, 2008

    The center halogen bulb is dimming out. I need to know how to change it.



×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Need to know how to change a headlight replacement bulb on a 2003 G35 Infinity.

Posted on Mar 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

How to Change a Headlight Bulb on a Toyota


<p><span>Replacing a <b>headlight bulb</b> is the most basic thing that you can do for your own car. Anyhow, if you have never changed a headlight bulb in your life, you may be a little bit lost at what to do with it. Replacing the faulty headlight bulbs on a very famous </span><span>Toyota</span><span> car is not difficult. Before you can replace one out, you need to have the bulb. It is best to go out in the sunshine when you do not need your car's headlights to pick one up. You need to know the maker and the model of your vehicle. For example, if you are having a 2001 Toyota Corolla, then you will need to look for that. At almost all auto stores, they will have books and photo albums by the <b>headlight bulb</b> so you can look up the right bulb that you need for your type of vehicle. After finding the exact bulb what you need, then you should get it. Now we can move towards the installation of your car's new headlight bulb!</span><br /> <p><span><br /></span><br /> <p><b><span>Installation Of Your Car's New Headlight Bulb</span></b><br /> <p><b><span><br /></span></b><br /> <p><span>You need to pop open the hood of your car and this is the first most things that you need to do. You can use a torch light to find the back of car's headlight. This is very easy to find, because they are on the back side of where they are located on the front of your vehicle. At this point of time, you need to observe, or you will observe that some </span><span>Toyota</span><span> made vehicles have a protecting cover of the back of their headlight unit. This is what requires a screwdriver to remove it. Just find all of the screws on the back plate, and then remove them all in order to reach the <b>headlight bulb</b>. After removing the screws, you should be able to take off the back plate easily. On some models of the cars you will observe that after taking off the back plate, here you can see many wires that are corked up in by plastic clips. At this moment, you will need to remove that plastic clip away and push all of the wires out of your way. You do not want to deal with any of that. As soon as you move all the wires, the dead headlight bulb will be seen.</span><br /> <p><span><br /></span><br /> <p><span>Removing your car's <b>headlight bulb</b> is as easy as taking a bulb out of a lamp. You can easily remove it by squeezing it to the left side. Now take your new bulb and put this bulb in and move it to the right side to lock it. It is a good idea to test the headlight at this point to make sure that it is working right before you put everything back together. Turn on the ignition switch of your car and turn the lights on. Now come out from your car to make it sure that the light are on. After ensuring that the lights are on and fixed properly, put the plastic clip back on wiring and put the back plate back onto its place. Make it sure that you insert all of the screws. Make sure that you picked all of your tools before closing the hood of your car, and here you have completed your changing <b>headlight bulb</b> task!</span><br />

on Jan 03, 2011 | Toyota Corolla Cars & Trucks

2 Answers

How do I get to the front headlight to change it


Re: Replace headlight bulb

  1. INSTALLATION GUIDE:
  2. BMW E38 99-01 HID TYPE 7 Series 1PC Halo Amber Projector Headlights
  3. Parts Identification:
  4. Projector Headlight
  5. Halo & L.E.D.
  6. Bottom of the Headlight:
  7. Ballast Bracket, Halo Wires(red/black)
  8. Turn Signal Adaptor
  9. TOOLS REQUIRE
  10. 10mm - 8mm socket
  11. Philip Screwdriver
  12. Crimper/Pliers
  13. For more information about how to install your vehicle, come visit our youtube page on
  14. http://www.youtube.com/spyderauto
  15. Remove the facotry headlight from the BMW. First remove the front panel cover below the headlight to access the bottom screw of the headlight housing. There is also two screws on the top of the housing.
  16. Once you have remove the headlight, turn the headlight around and remove the bracket that holds the Ballast. Then remove the ballast using a philip screwdriver.
  17. Unplug the wire from the ballast, and then remove the Xenon Plug from the housing. Put the Ballast aside.
  18. Carefully remove the D2S Xenon Bulb from the factory housing. Once you have remove the bulb, transfer the bulb to the Spyder headlights.
  19. Remove the bracket from the Spyder Headlight, and then install the ballast on the housing like the original. Once you have put the ballast on, put the bracket back on.
  20. Remove the Panel Cover bracket from the original headlight to the new Spyder Headlights as shown here.
  21. STEP:
  22. Install the Spyder turn signal socket if the orignal does not fit, unplug the factory plug from the harness and plug the new one on.
  23. Install the Spyder Headlight back on to the vehicle. Plug the Harness back on, the halo/L.E.D. Wires is connect to the Parking lights. These wires are optional to your vehicle, you do not have to wire them together.
  24. Factory Xenon Headlight
  25. Spyder Projector Headlight using Factory Xenon Lights
  26. STEP:
BMW e46 HID Headlight Replace
get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-0.jpg

get-front-headlight-change-afy5cnsznmokzumyhdcbeseq-5-2.jpg

Nov 22, 2012 | Cars & Trucks

1 Answer

Moisture in 2001 sc-1 headlight


Did you recently change a bulb or have a crack in the headlamp?
headlights are design so they shouldn't acumulate moisture, however if replace the bulb and not seal it corectly we can get a water inside. First you should inspect your light for any damage (small cracks, tiny holes ect.), 2nd check your bulb position in the headlight, should be installed firm in the socket (oring, seal from must be in good condition, no cracks, flexible, if bulb is very old seal can get damage, so just replace a bulb). In order to remove moisture you will have to remove the bulb anyway and with the hair dryier heat the lens till you get water out of it, be carefull do not heat to high and just in one spot becuse you can damge headlight. it will take a while to do this at this time of the year if you live in late fall, winter afected region, but if the problems discribed above exist your moisture will come back(you may have to replace the headlight). Good luck

Nov 02, 2012 | Cars & Trucks

2 Answers

How do i get to my low beams on my chrysler 2005 sebring sedan i got to the high beams perfect but the low beams right next to it has a metal barrier surrounding it which makes it impossible


Unfortunately, the answer I have is not a happy one =(. My wife has a 2005. In order to replace the bulb you will have to pull the Crutons (plastic push pins) that hold the front bumber cover on, remove the Headlight housing & replace the bulb that way. Shame on Chrysler for making it so difficult, in my opinion. But I hope this helps you to change the bulb =)

Aug 26, 2011 | 2004 Chrysler Sebring

1 Answer

I'm having a hard time replacing the driver side headlight. Am I overthinking this?


Why are you trying to change the headlight? Is it broken?
If you are trying to change the bulb, because it is burned out, that is done from the rear of the housing. You have to exercise a bit of care getting the old bulb out and putting the new one in, but is it not difficult. If you are removing the right-side (from the driver's position) bulb, remove the battery (make sure you have your radio anti-theft code if you have one of those radios). Reach behind the headlight assembly, grasp the bulb holder retaining collar, turn it counterclockwise, then pull out the bulb/holder assembly. To remove the bulb from the holder, simply pull it straight out of the holder. Reverse procedure to lock the holder into place.
Removing the headlight housing is somewhat more involved. There are five bolts that hold it in place.

Sep 27, 2009 | 1993 Honda Accord

2 Answers

How do i change the left headlight on a 2002 dodge stratus


You should have two long star-patterned screws that run through the brackets of it......unscrew thoss and the headlight assembly should pop out and then you can change the bulb or the headlight assembly at that time.

Jun 25, 2009 | 2002 Dodge Stratus

3 Answers

Replacing headlights on a 1988 760


Replaceable Bulb 1985–89 200 SERIES AND 1987–89 700 SERIES
  1. Make sure the headlights are off and the ignition is OFF.
  2. Working from under the hood, release the clip and remove the wire connector from the back of the lamp assembly.
  3. Unscrew and remove the large locking ring on the back of the headlamp.
  4. Remove the bulb and its holder; replace them as a unit WARNING
    When installing new bulbs, never touch the glass bulb with your fingers. The grease will develop a hot spot on the bulb and radically shorten its life.
  5. When reinstalling, make sure that the bulb sits properly in the reflector assembly. Tighten the locking ring and reattach the wiring connector.
Fig. 8: Replaceable headlight bulb mounting — 780 shown, others similar 87866034.gif

Jun 19, 2009 | 1988 Volvo 760

1 Answer

Installing headlight bulb in a 2006 Audi A4 Avant


that's generally the only way to change them... you may have to remove the battery or other obstacles to get at them.... a quarter turn or so should free the bulb. careful not to touch the bulb with your fingers as that shortens the life of them

Robert

Please take a moment to rate this solution.. thanks

Dec 15, 2008 | 2006 Audi A4

4 Answers

Hi ford focus 2006 in ireland, want to change headlight bulb, but how do i get to it?


The owners manual does tell you - but it is not obvious.
Unscrew the headlight unit - 1 screw
Push down the 2 retaining clips at the back of the unit to release them (long screwdriver needed
Remove the headlight unit so you can work on it - it will come out - try getting the end in the middle of the car out first rather than the wing side
The rest is easy as you have space to work.

It is easier to put the unit back than take it out apart from the clip on the wing side !

Enjoy

Dec 13, 2008 | 2006 Ford Focus

Not finding what you are looking for?
2005 Infiniti G35 Logo

1,589 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts

yadayada
yadayada

Level 3 Expert

60541 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21927 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

13152 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...