An expert who has achieved level 2 by getting 100 points
An expert that got 5 achievements.
An expert whose answer got voted for 20 times.
An expert who has answered 20 questions.
Re: power seat moves on 1 side only
Look very careful inside the track and see if anything is interfering with the gear mechanism. It doesn't take much to lodge in there and cause the gear to lock up. If everything is clear, there is a cable that attaches the motor to the gear, that cable may be stretched or broken.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Don't know what vehicle you have, but some vehicles, if you remove the outside side panel at the bottom of the seat, up near the front of the seat, looking at it from the outside, is a small bolt, if you put a socket on this bolt & turn it one way or the other your seat should move forward or back, just move it a little at a time in one direction or the other, then try your power switch, sometimes the seat goes back to far & is out of range for the motor. the other could be a bad motor.
There are plastic gears connecting the track to the seat assembly. Whne one of these strip the seat will only work or move to one side. Infiniti does not sell a simple fix. You are looking at buying an entire seat assembly complete with the module for all the electronics. It will be at a cost of around $950 - $1000. Once that is in, Infiniti must program the seat to the brain of the car, only then can you reset your memory settings.
Go under the seat and check both slide tracks for anything jamming it up...I've removed gloves, socks, candy boxes etc from tracks. Also if its not a power seat, check that when you move the release lever it is connected by a stiff wire to the opposite side. That wire releases the right side track. If broken or stretched, it wont.
maybe you got pennies money stuck in the track if not you got 1 motor for that the motor goes in a assembly in there you have 2 cable a left and a right lock under the seat you probably got the right cale disconnect sometime there stuff that push under the seat and push that cable off if its that just push the cable back in let me know and please if you can take the time to rate this thank you pierre
p.s when you try to put the cable back in dont force to mush