Question about Chevrolet Chevy

1 Answer

No gears will engage in my turbo 350 gearbox - Chevy Chevrolet Cars & Trucks

Posted by on

  • 1 more comment 
  • devilsjr55 Nov 23, 2008

    my tranny will not go into gear either.the linkage moves fine inside and out.i pulled the pan hoping to find the inner linkage broke(nope).anyway fluid is perfect looking.it is in a circle track car,and was working fine and then 1 hr later,nothing.move shifter around and no load on motor anywhere.what do you think,thanks,jeff

  • Kevin Oliver
    Kevin Oliver Jan 05, 2009

    Reverse BANG!!!... In my case (2 days ago) I had just shifted into reverse to back up a slight grade and BANG - it felt like I had run into a tree. I've been limping around with what appears to be 2 forward gears. It will shift but leaves out a gear between I think. Dang It... Just replaced the Engine this summer. 1999 Silverado Z71 4WD w/ Vortec. Can this tranny be replaced with something more reliable - I'm finding lots of horror stories on the different sites...

  • tical823 Apr 29, 2009

    350 transmission from 1979 cutlass one week ago the transmission had trouble , slower than usual, getting out of first gear. Then on day driving fine and a stop light and no go. When put into reverse fine, found that atf is leaking from somewhere. i have no idea,???

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

I build turbo 350 transmissions. Can you give me more info? Almost always you will have a reverse as long as you have 9 1/2 quarts of transmission fluid. Now if you do not have reverse or a drive and it is full you have one of two problems. A bad (blown convertor) or the pump gear is broke. The pump usually goes out over a coarse of a week until it can not build pressure. The Convertor is usually the stronger piece and makes a shotgun BANG when it goes out. I really need to know how it was acting a week or two before you just had NOTHING. Can I have the style Lock up / non lock up? The year model would help too.

Posted on Nov 04, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Transmission 1986 gmc vandura 2500with a 350 turbo it goes into gear but doesnt move why


the seals on the main shaft of the transmission have more than likely gone bad. when you place it in drive there is an internal fluid leak that is causing multiple gear engagements. you will need to have it rebuilt.

May 04, 2015 | GMC Vandura Cars & Trucks

1 Answer

Mazda bravo b2600 gearbox growles and grumbles. cant select 2nd or 4th gear. 1st, 3rd,5th & reverse ok.


I am sorry to tell that the gearbox need to have some major repair. It is also not advisable to continue driving as the gearbox can breakdown completely leaving you stranded. At least one the cluster drive gears in the gearbox is damaged (gear tooth stripped off) that will result in that only some of the gears being able to be selected. The broken off tooth are still in the gearbox and due to the oil movement in the gearbox it can be "washed up " in between to engaged gears destroying those as well. This will happen up to the point where there are no gear selection at all.

Jan 29, 2015 | Mazda Cars & Trucks

1 Answer

Volvo v40 1.9 d from 2000 gearbox problem


hi
1: yes it is the gear box
2: I am not sure, but I think yes 1998 gearbox will fit into 2000.
if you have the 1998 gearbox in front of you, then you can compare it

Jan 25, 2014 | Cars & Trucks

1 Answer

What transmission come out in a 1983 chevy silverado


It should be the 700 r4 transmission with the 350 block,
unless someone changed it out, it could be a turbo 350, if the truck is a 3/4 ton.
if you have 3 gears and over drive it is a 700 r4
only 3 gears turbo 350

Jan 06, 2011 | 1983 Chevrolet Silverado

2 Answers

Turbo 350 trans no forward gears but does have reverse


It's either your servo, or your bands.
Either way, the tranny needs a good cheap shop repair.
I'd just get a warrantied salvage yard tranny if I were you and save a few hundred bucks.

Mar 07, 2010 | Chevrolet Camaro Cars & Trucks

1 Answer

Will a turbo 350 fit into a 1990 gmc halfton that has a 700 r4 in it


It will mate to the engine, but the turbo 350 is shorter then the 700R4 and your going to loose the lower first gear ratio in the 700R4 and the OD that the Turbo 350 don't have. It can be done, but your going to have to relocate the transmission cross member and have a longer drive shaft made.

Good luck.

Jan 04, 2010 | 1995 GMC Sierra

1 Answer

Gearbox engagment


i cant solve this i got the same problem did u ever solve this. i have changed - clutch,slave an master cylinder and the gearbox has been rebuilt

Dec 11, 2009 | 2000 Mini Cooper

1 Answer

I can shift into any gear but only first is engaged.


One of the gearstick joints has disconnected - hopefully not actually inside the gearbox. Gearstick connects to gearbox via a few rods & joints or a pair of cables in sheaths. Check something visibly moves near the gearbox no matter what movement the gearstick makes.

Sep 09, 2009 | 1999 Volkswagen Beetle

1 Answer

5th gear doesn't lock


5th gear is gone, it'll be cheaper to find a good second hand one with a waranty than to get your one fixed sorry to say. The inside of gearboxes are only a place for gearbox specialists and they arent cheap unless you know someone.

Nov 24, 2008 | 1988 Nissan Pulsar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

406 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...