Question about 2007 Ford E Series Passenger
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 30, 2009
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 12, 2015 | Jeep Cars & Trucks
Nov 26, 2015 | Cars & Trucks
Nov 08, 2012 | Cars & Trucks
Dec 09, 2010 | 1999 Pontiac Grand Am GT
Nov 15, 2010 | 1995 Ford Escort
Oct 19, 2010 | 2001 Volkswagen Passat
Apr 14, 2010 | 2001 Volkswagen Jetta TDI
Dec 28, 2008 | 2004 Ford Expedition
132 people viewed this question
Usually answered in minutes!