Question about 2003 Hummer H2
Had my H2 serviced by Hummer/Cadillac dealership, they worked on the steering, now my front tires rub the stabilizer? bar in the front when turning sharp, (ie pulling into parking spaces, backing out of driveway onto street, making u-turns), and after taking it back 2 times, they dismissed it as a "known issue" with H2s, greased the bars up so that the tires didn't wear too much, and said there is nothing else they can do for me.... HELP Please!!
If it definitely wasn't doing it before you took it in to the dealer and it was after they worked on it, then it must be related to what they have done and should be repaired by them. I recommend that you take it back again, ask to speak to the service manager and explain that you want it sorted out. If you get no joy from him, make an appointment to see the Dealer Principal (or overall manager, whatever his title is). I find it hard to believe that any reputable dealer would tell you that there is nothing wrong/nothing they can do when it MUST be something they have done in the first place. While the rubbing is probably not going to cause that much damage to the tyres, it is not exactly desirable either! If you still can't get any help from them, you could get another mechanic to look at it give you a second opinion. If they need to charge you for doing so, then you should be able to get reimbursed by the dealer once it is proven that there is an issue.
Sorry I can't help more.
Posted on Nov 02, 2008
Tips for a great answer:
Aug 10, 2014 | 2003 Hummer H2
DOOR PANEL REMOVAL
Its just fitted with few screws and hidden lock clips. The clips are very delicate and can break easily. But no worry, the clips are easily available.
some vehicle models these screws are hidden. Once the panel is
loose, don't just pull it out, there are few wire connectors connected,
first disconnect the connector plug, then lift the panel out and keep in safe
place for re-installing.
your help, there are few very helpful similar help links with diagrams and
solutions to make your task easy. Click the link below:----
How to Remove Door Panels on Acura Integra
How to Access car door panel?
Vehicle door panel components?
How to remove the door panel to install a new window regulator on Cadillac Deville?
Hummer H2 Door Panel Removal? http://technoanswers.blogspot.in/2012/07/hummer-h2-door-panel-removal.html
Hummer H2: How to remove Front Door panel? http://www.howtobyme.blogspot.com/2012/07/hummer-h2-how-to-remove-front-door.html
2009 Hummer H2 Door Panel Removal
to remove window motor on driver side door panel on 1994 Oldsmobile Cutlass
to remove door panel, door window motor and regulator on 1991 cavalier?
how to remove rear window inner panel on Hyundai Elantra?
ford explorer window motor, regulator and door panel removal?
These details will help.
Nov 23, 2012 | 2002 Cadillac Deville
Manufacturer GENERAL MOTORS CORP. Recall Date: 02/04/2004 Potential Number Of Units Affected: 68,875 Description SERVICE BRAKES, HYDRAULIC Summary CERTAIN SPORT UTILITY VEHICLES, PICKUP TRUCKS, AND PASSENGER VANS FAIL TO COMPLY WITH THE REQUIREMENTS OF FEDERAL MOTOR VEHICLE SAFETY STANDARD NO. 135, ?PASSENGER CAR BRAKE SYSTEMS.? SOME OF THESE VEHICLES WERE PRODUCED WITH AN OUT-OF-SPECIFICATION BRAKE HYDRO-BOOST HOUSING RELIEF VALVE BORE. Consequence CONSEQUENTLY, THE VALVE O-RING SEAL MAY FRACTURE. STEERING EFFORTS MAY BE SLIGHTLY INCREASED WHILE BRAKING OR PARKING. UNDER CERTAIN DRIVING CONDITIONS, A FRACTURED SEAL MAY REQUIRE A SLIGHT INCREASE IN THE APPLIED BRAKE PEDAL EFFORT TO ACHIEVE THE SAME VEHICLE DECELERATION RATE AS PRIOR TO THE SEAT FRACTURE. Remedy DEALERS ARE TO REPLACE THE HYDRO-BOOST RELIEF VALVE. THE RECALL BEGAN ON APRIL 26, 2004. OWNERS SHOULD CONTACT CADILLAC AT 1-866-982-2339; CHEVROLET AT 1-800-630-2438; GMC AT 1-866-996-9463; OR HUMMER AT 1-866-486-6376.
Jan 03, 2011 | 2003 Hummer H2
Jan 02, 2011 | 2003 Hummer H2
Dec 08, 2009 | 2003 Hummer H2
Nov 29, 2009 | 2003 Hummer H2
Jul 28, 2009 | 2004 Hummer H2
Jun 07, 2009 | 2007 Hummer H2 SUT
233 people viewed this question
Usually answered in minutes!