Question about 1990 Chevrolet Corvette

1 Answer

1990 corvette well my corvette is in almost perfect condition exept for a couple of things. The first of the problems is the door bell, it almost never bongs then once in a while it does. I want to know if i should just replace the modual or just check a loose wire or something. second is one of the speakers, it dosent do anything but hiss like a tv thats on a blank channel. I think its just the amp. my third is just a worry. if you let the car get to running temperature, and then turn it off then on again it will make a rattling noise here and their. is this normal for it to do that? thanks for listening

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Chevrolet Master
  • 6,674 Answers

Check timing isn't running a little advanced, and check engine isn't running a little too hot.

Posted on Feb 22, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

No start no fuel 1990 corvette has spark and new fuel pump

As someone who made this mistake, are all the wires reconnected under the fuel door? Check fuel pump fuse

Jul 11, 2014 | 1990 Chevrolet Corvette

1 Answer

1990 corvette rearview mirror light stays on

Check switches at door jams looks like a black button they wear out since its just a basic contact switch just remove the switch from the door jam remove the two wires ( some are hardwired to the switch if so you will have to snip the wires if not just disconnect the plug) now twist the wires together or use a small piece of wire to short the plug. This will shut off the light assuming that there is no short in the switch wiring and the switch on the other side of vehicle is functional

Apr 12, 2014 | 1990 Chevrolet Corvette

1 Answer

I have 1990 vette have rebuilt headlight motors and a new headlight module , but headlights still go up and stay up in sunlight

Not a Corvette expert, but I don't think sunlight would have any effect.
The motors should close the doors when you turn the lights off regardless if it is dark or not.
Are the headlights staying on, or just the doors staying up ? The up position is the default when something is wrong, so I think it takes voltage to close them.

Aug 25, 2012 | 1990 Chevrolet Corvette

1 Answer

Resest corvette security

try locking and unlocking passenger door thee times

Apr 01, 2012 | 1990 Chevrolet Corvette

1 Answer

What transmission is in a 1990 corvette?I think it is a 700r4?and if yes will any 700r4 fit ?

No there are different 700R4 transmission, well that not quite true. The 700R4 had many jobs to matted to Corvettes to SUVs, the internals are where the differences were in the 700R4 such as the servo's and boost valve which can be easily replaced. Best thing to do is to got to a Transmission shop that can build a transmissions for your Corvette or buy a replacement 700R4 for your year of Corvette. That is why the shift points and firmness are different in a Corvette then a Cadillac while they both have 700R4 in the 1990's. Be bad for a Corvette to shift like Grandma's Cadillac going to play dingo. Good luck and hope this helps.

Dec 15, 2009 | 1990 Chevrolet Corvette

1 Answer

Cannot find relay center in 1990 corvette

check the low side switch located on the ac receiver drier for 12 volts if so jump it with a paper clip if the compressor comes on then the relay is good if not the relay is in the fuse junction box under the hood.Most likely the pressure sensor.

May 23, 2009 | 1990 Chevrolet Corvette

1 Answer

1999 chevy corvette window doesnt always go up or down

next time the window does not work slam the door a few times and see if it starts to work again, if so it needs a window motor

Apr 18, 2009 | 1999 Chevrolet Corvette

2 Answers

1980 Corvette misses and bogs on accereration

the way it sounds is the floats in the carb are sticking or getting too much fuel

Nov 12, 2008 | 1980 Chevrolet Corvette

2 Answers

1990 corvette electrical problems

This may be fuse blow out or may the display is defective in the circuit...........

May 29, 2008 | 1990 Chevrolet Corvette

Not finding what you are looking for?
1990 Chevrolet Corvette Logo

117 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

77939 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides