Question about 2000 Jeep Grand Cherokee

2 Answers

Indicator stays on

1994 grand cherokee laredo the indicator won't flash just stays on when i put it on

Posted by on

  • coronna Nov 02, 2008

    it seems the car has a securty alarm problem. it wont start at all.how do i fix this problem

×

2 Answers

I have a 1993 Jeep Grand Cherokee thatwas doing the same thing. After checking to see if the hazard lights would work and found that they were working correctly, I checked the flasher unit which is under the dash on the drivers side by the brake pedal. The flasher assembly is easy to fix and it is located right next to the hazard light flasher unit.

Posted on Nov 06, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 512 Answers

I am going to take it you are talking about the turn signal...look for a burned out bulb...that will cause this condition

Posted on Nov 01, 2008

  • Russell Bailey Nov 02, 2008

    try locking and unlocking the drivers and passengers door with the key.this should disarm the alarm...if it doesnt you will need the dealer to help diagnose it

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ok my 2001 Grand Cherokee Laredo wont stay in park


Transmission sticks in reverse- won't go into park. - JeepsUnlimited

www.jeepsunlimited.com/forums/showthread.php?...won-t-go-into-park
Jun 14, 2013 - 12 posts - ‎5 authors 2003 6 cyl 4x4 Grand Cherokee Laredo automatic- Occaionally, when shifting from REVERSE TO PARK, my Jeep will stay in reverse. Typically its ... '2001 WJ'4,0L'42RE'NV 242'380000 km'ECE Compliant' ??????????? ??? ...

2001 jeep grand Cherokee laredo - CarGurus

www.cargurus.com > Questions > Jeep > Grand Cherokee
CarGurusJan 27, 2014 - 2001 jeep grand Cherokee laredo - Just purchased a 2001 Jeep GrandCherokee Laredo and ... It starts in PARK sometimes and sometimes it won't and I have to start it in Neutral. ... Hatch shuts flush, but won't stay shut. help!

Oct 22, 2015 | Cars & Trucks

1 Answer

Fixing a 1994 Jeep Grand Cherokee Laredo's power


I would assume that one hose is for either side. I would get a measurement of the old hose

Apr 11, 2013 | Cars & Trucks

1 Answer

Back up lights on 1994 Grand Cherokee Laredo not working


You have a back up lamp relay in the (power distribution center) by your battery9be6eb73-dcd0-4a56-aac3-d302489dbf38.jpg

Mar 24, 2013 | 1994 Jeep Grand Cherokee

1 Answer

1999 jeep grand cherokee laredo v6 4x4 won't fire on all 6 cylinders just 4 why?


Plenty of causes. Plugs, valves. rings, numerous electronic/electrical faults. Diagnose vehicle and eliminate problems one by one.

Oct 30, 2012 | 1999 Jeep Grand Cherokee

1 Answer

My car start but shutt off inmedialty


If you have not done so pull the engine codes or have someone do it.
The codes will give you a good idea where to start otherwise the first place I would check is replacing the Crankshaft Position sensor. This is not only very common for them to fail but I have 1994 Laredo and 1996 Laredo and both had the same trouble at exactly the same time. In addition I replaced the Intake Air Temp sensor, coolant temp sensor and idle air control valve on the 1994. The clicking is probably relays and is more than likely normal.

Dec 13, 2011 | 1996 Jeep Grand Cherokee

1 Answer

How can I disable jeep grand cherokee security system


Hi Andrew:
The 1994 Jeep Grand Cherokee Laredo Anti-Theft System is equipped with Vehicle Theft Security System (VTSS). VTSS system monitors vehicle doors, hood, liftgate and ignition. If an attempt is made to enter or operate vehicle without proper disarming of system, vehicle horn will sound, headlights, taillights and parking lights will flash, and engine will be prevented from running. I have an '93 GC 5.2L V8...

The following wiring diagram and electronics circuit contains detail schematics of The 1994 Jeep Grand Cherokee Laredo Anti-Theft System. Herein you will find interconnection between electronics parts of the system such as body control module, auto headlamp light sensor. VTSS led, driver door module, passenger door module, cylinder lock switch, junction block, power distribution center, and grounding. Herein you will learn also how the Vehicle Theft Security System works, removal, installation, testing and troubleshooting procedures.

Try HERE and also, remember that here can find the Jeep Grand Cherokee Service Repair Manual.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Nov 25, 2011 | 1994 Jeep Grand Cherokee

1 Answer

I can't adjust my fan belt


if its a serpintine belt there is a half inch square hole on the ideler pulley ,put a breaker bar in the hole and it can move to give you enough slack to put the belt on

Mar 20, 2009 | 1994 Jeep Grand Cherokee

1 Answer

2000 grand jeep laredo


bulb holder fault or bad earth on light cluster ,try putting side lights on and then indicator if it all goes flashing between the two then its a dodgy earth connection .

Nov 06, 2008 | 2000 Jeep Grand Cherokee

1 Answer

Won't stay running 95 jeep grand cheerekee laredo 4x4


When you put the jumper cables on, put the key in the drivers door lock and unlock the door to deactivate the factory alarm.

Nov 03, 2008 | 1995 Jeep Grand Cherokee

1 Answer

1994 Grand Cherokee Laredo Blocked Orifice tube


I have a 1994 jeep laredo. When I make a u turn there's a loud sound while making the turn and the car starts skipping until I turn the wheel straight. What causes that?

Jun 13, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
2000 Jeep Grand Cherokee Logo

380 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

63661 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...