Question about 1999 Daewoo Lanos

1 Answer

Daewoo 1.5i 1994

Just need ignition timing settings please

Posted by on

  • 1 more comment 
  • mish2202 Jan 26, 2009

    the year of manufacture is 1994

  • mish2202 Jan 30, 2009

    thank you very much

  • Raymond Hall
    Raymond Hall May 11, 2010

    Is your vehicle a 1994 or 1999 ?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 61 Answers

It should be 10deg at idle

Posted on Jan 29, 2009

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the ignition timing wire on a 1994 gmc jimmy


Its on the dist. on chev's it the brown wire and you can just unplug it along with the other wire on the harness.

Sep 23, 2014 | 1994 GMC Jimmy

1 Answer

HELP! I have a Daewoo Lanos(1998-99), ive got a


The fault code 53 is an ECM IMMOBILIZED ERROR.
The immobilizer anti-theft system thinks the key is invalid. If it detects an error, it will;
Disable the fuel injector circuit--- Disable the fuel pump circuit---Disable the ignition coil.

Code 53 will set when:
1- The Eectronic Control Module (ECM) does not receive the signal from the Immobilizer Control Unit (ICU) within 0.9 seconds when vehicle is stationary, or 1.8 seconds when vehicle is moving.
2- The ICU sends the ECM an incorrect release message more than 5 times.
3- The above conditions continue until the ignition is switched off.

I hope this helps.

Aug 24, 2011 | 1999 Daewoo Lanos

1 Answer

I HAVE CHANGED THE IGNITION ON MY DAEWOO ESPERO CD 1998. NOW THE CAR WONT START. I SUSPECT IT IS THE IMMOBILISER THAT IS CUTTING THE ENGINE OUT. I HAVE PUT ON A UNIVERSAL IGNITION SWITCH SO THE...


Hi There.
it may be the immobiliser,,, and then it may be that you need the ignition key code and/or ECU that goes with that particular model

May 03, 2011 | 2000 Daewoo Korando

1 Answer

Need timing belt mark diagram for the 2000 2.2 daewoo laganza


Hi and welcome to FixYa, I am Kelly

Below are the 2 pictures that should answer your question:

Camshaft:
http://ww2.justanswer.com/uploads/dinotapia/2009-10-07_061546_cam_timing_marks_daywoo.png
Crankshaft:
http://ww2.justanswer.com/uploads/dinotapia/2009-10-07_061602_crank_mark_daywoo.png

Just note that even with all the timing marks aligned you can still have the ignition timing 180 degrees incorrect. I.e the intake, exhaust and crankshaft can all be in time but the engine will miss-fire back through the intake due to incorrect IGNITION timing.

Thanks for choosing FixYa,
Kelly

Mar 16, 2011 | Daewoo Leganza Cars & Trucks

1 Answer

How to set timing 2001 deawoo laganza


you dont set timing in an electronic ignition system. the only thing that affects timing is the timing belt.

Apr 17, 2010 | 2001 Daewoo Leganza

1 Answer

98 daewoo lanos ignition timing appears to be


try the distributor maybe it needs reset with the timing

Jun 05, 2009 | 1999 Daewoo Lanos

2 Answers

1994 daewoo fuel pump


Google daewoo parts

Apr 13, 2009 | 1999 Daewoo Lanos

2 Answers

The timing belt broke, need to know what are the points?


THIS IS YOUR TIMING BELT DIAGRAM .CAMSHAFT AND CRANK PICTURE .

4180ab7.jpg

33d6a22.jpg

Jan 17, 2009 | 2002 Daewoo Nubira

2 Answers

For 1.3 1994 ford aspire, the timing and procedure


Please rate as fixya if this helps. Ignition Timing Check and adjust the ignition timing using the following procedure:
  1. Start the engine and allow it to warm up to normal operating temperature.
  1. Shut off all of the accessories.
  1. Connect Rotunda Timing Analyzer 164-R0257 or equivalent.
  1. Using a jumper, ground the self-test input (STI) terminal at the data link connector (DLC).


    43d48c0.gif

  1. Check the base ignition timing. The yellow ignition timing mark should line up with the pointer on the timing belt cover.


    db68a16.gif

  1. If the timing marks do not line up, continue with the following steps.
  1. Loosen the distributor bolts.
  1. Rotate the distributor (12127) until the timing marks are properly aligned.


    ea7825c.gif

  1. Tighten the distributor bolts to 19-25 Nm (14-19 lb-ft).
  1. Check the timing marks to ensure they did not move when the distributor bolts were tightened.
  1. Remove the jumper from the STI terminal at the DLC.
  1. Remove the Rotunda Timing Analyzer 164-R0257 or equivalent.

Sep 26, 2008 | 1994 Ford Aspire

Not finding what you are looking for?
1999 Daewoo Lanos Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Daewoo Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

yadayada
yadayada

Level 3 Expert

60792 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Are you a Daewoo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...