Question about 2006 Hyundai Sonata

1 Answer

Head lamp passenger headlight doesn't work, bulb is good plug from wiring harnest is good.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 94 Answers

Hi fred
the earth wire from the plug wiring loom, to the body may need cleaning, follow it back to find out where it earths.take out screw and use a small piece of sandpaper

Posted on Oct 30, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Headlight wont work on passenger side of 2006 town and country


Try the working bulb on that side. Just because it is brand new doesn't mean it is good. If it still doesn't work push the wires on the back of the plug and see if it comes on if it does replace the head light plug. If not follow the wiring back and look for a break in the wire where it rubs against something

Apr 04, 2014 | 2006 Chrysler Town and Country

2 Answers

\1991 geo metro dim headlight pass side


in low beams or high or both?
that is caused by:
1: bad held lamp. old lamps can go dim.
swap left and right, if dim follows bulb, bingo weak bulb or wrong type bulb. buy matching blubs (same brand and P/n)
2: bad wiring to lamp. damaged wires, or connectors to same.
4: bad combo switch. (if low beams)
5: bad fuse or holder, corrosion , to either.
head lamp fuses. there are 2. left and right.
6: hackers, many hackers put in wrong lights. inspect it.

Sep 30, 2013 | 1991 Geo Metro

2 Answers

2003 acura tl type s passenger headlight not working high or low


After studying the wiring diagrams for your vehicle, this is what I can tell you:

First, the possibilities for your problem depend a LOT on if your vehicle is equipped with daytime running lamps (DRL) or if it is equipped with standard head lamps.

Then, the passenger high beam circuit and low beam circuit are separate circuits as well as separate bulbs. One circuit has little or nothing to do with the other. About the only thing they have in common is the Passenger Multiplex Control Unit, or if equipped, the DRL Control Unit.

I do not see any single "wire" that could fail and take out both of these circuits at the same time. The power, as well as the ground circuits for these two bulbs come from entirely different places.

With all that said, I would say that you either have a failure at the passenger multiplex control unit or you have two separate problems. - PROPER DIAGNOSIS REQUIRED.

Apr 09, 2012 | 2003 Acura 3.2TL

1 Answer

Drivers side head light is way dimmer than passenager light even after new bulb replacement


When looking from the outside of the headlight at the bulb, can you see the bulb clearly??
These lenses are notorious for dulling very badly. If it has you can use a regular headlight 'restoring' kit sold at most auto part locations.

If it is not a lens issue, you may have a wiring/supply issue.
Then you would need to find the troublesome wire/connection.
I am not the best at wiring issues, but I would try to find a power source wire with the same amperage rating, run a bypass jumper from a known good voltage source and see if the light changes. If no change, your problem may be the harness or plug at the rear of the headlight bulb.
Hope I could help
GL

Dec 31, 2011 | 1999 Plymouth Voyager

1 Answer

Passenger side head lamp and fog lamp not working.I have changed the headlight bulb and checked the bulb and its ok,but the headlight still does not work


check the fuse box may be a fuse broke if not check the wires and conections see if everything is ok and if still not working bring the car to an electrician

Jan 12, 2011 | Chrysler PT Cruiser Cars & Trucks

2 Answers

What causes the passenger side headlight turns off when the high beams turn on.


sounds like you have a blowen head light bulb. thanks dodge tec

Jan 03, 2011 | 1997 Chevrolet S-10 Pickup

1 Answer

I have a 2008 Ford Fusion and the passenger side head lamp will not come on. The fog lights and driver side head lamp works but the passenger side will not work on bright or on dim, what could this be?


Hi. Since the headlight on the driver side is working then we dont have any problem with the fuse or relay. Check the wiring and the socket of the passenger headlight if it is intact to the bulb. If it is intact, then this could be a headlight problem. Time to replace the passenger headlight.

Sep 06, 2010 | 2008 Ford Fusion

1 Answer

Headlight


This will most likely be a bad wiring harness. you can check the wire harness by using a volt meter. use the internal cooper prongs in the head lamp plug for testing.

Jun 21, 2009 | 1995 Ford Ranger Supercab

1 Answer

How to replace headlight bulb 2000 Tacoma


Open hood. Unplug wiring on back of head lamp. Pull off rubber boot on back of head lamp. Unlock clamp that holds light bulb in. Replace bulb. Clamp bulb down. Replace rubber boot. Plug in bulb.

Mar 22, 2009 | 2000 Toyota Tacoma PreRunner

Not finding what you are looking for?
2006 Hyundai Sonata Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...