- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
check front washer pump fuse.if fuse okay problem could be washer switch bad use a 12 volts test light see if washer motor getting power if yes washer motor faulty.if no your fuse okay you have open circuit at fuse box to switch.
Sorry to have to make you post this again, as I don't know where the fluid line runs, but you will need to remove the interior and door panels, carpet, to follow the line to see where the line is broke.
If you post back, maybe someone will know where it goes to save you from taking everything apart.
Hi, welcome to FixYa.com my name is Shawn and I will be answering your
Remove the differential rear cover. Remove the rear calipers and rotors. Remove the 8mm bolt that holds the pin in and remove the differential pin. Remove the ABS sensors push the axle in towards the center of the rear end. Remove the c clip washers. You can now pull the axle out.
I hope my assistance helped you and resolved your
concern, if you need further assistance please ask.
I have the same problem with my 2000 chevy blazer as skornec had posted. I kinda already figured the hose or spray nozzle was plugged. But the problem with checking those items is that I don't know where the hose is located to the back wiper. And the only thing that could be I see that could be the spray nozzle doesn't even have holes that washer fluid could spray from. So basically I just would LOVE if someone could please inform this lame brain of where to find the spray nozzle on the rear window and where in the interior of my blazer does the washer hose run.
it could a blockage at the spayer outside .take a safety pin and poke in the small hole outside. to check the button remove,it from the dash take a 12volt tester check to make sure you have poweon one side
There are two separate washer pumps underneith the washer res. behind the front driver quarter panel. The exact pumps are hard to find. I have the same prob with my 99, but both are out. I had a 98 that the front worked but not rear. I had to get a "universal" washer pump. I'm still trying to find a factory replacement for this one before I do that. No luck so far.