Cars & Trucks Logo

Related Topics:

Anonymous Posted on Feb 29, 2012

Car vibrates car runs smooth until i come to a stop sign or stop light car vibrates so bad steering wheel feels lt wants to pop off, i will shift it to nuetral and it will stop, i get tired off shifting to nuetral everytime i come to a stop, everything has been replaced motor mounts timingbelt complete tune up ect.

  • Anonymous Feb 29, 2012

    the axels were put on new, when it does the vibration idle goes down, almost like if it wants to shut off, other than that it runs great i was told i wasn't the drive shaft,

  • Anonymous Feb 29, 2012

    sorry that it wasn't the drive shaft

×

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

  • Contributor 1 Answer
  • Posted on Feb 29, 2012
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Joined: Feb 29, 2012
Answers
1
Questions
0
Helped
149
Points
3

Try changing your cv axels/ drive shaft

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Why do I have bad vibration in my 06 impala?

Could be a vacuum leak. Buy a cheap vacuum gage and attach the hose to manifold vacuum port. Must be manifold vacuum not carb or anywhere else. The gage will tell you if you have vacuum leak. Then you will have to track down the source. Other issue might be starving for fuel but OK in park so maybe not. Good luck
1helpful
1answer

I have a 2008 Infinity QX-56 and it shakes terribly when I apply the brakes when driving at highway speeds. It also feels like the suspension is bad when you go over a bump or hit a pot-hole.

Warped brake rotor usually cause high vibration at high speeds. But you can also feel it at lower speeds. But bad ball joints and tie rod end will cause vibration at high speeds. Ball joints will pop at pot holes, sometimes. Tie rods can be felt in the steering wheel at a stop. Move the wheel slightly to the left and right, you can feel/hear a tap as you turn it.
1helpful
1answer
0helpful
1answer

94 jeep grand cherokee front end vibration

Many things will cause vibrations, especially on 4WD trucks. Causes include: worn ball joints, worn tie rod ends, bent wheels, tires out of balance/shifted belt in tire, worn steering dampener, worn u-joints, worn CV joints, engine problems such as engine misfire, a bad fuel injector clogged fuel filter or injectors, worn ignition parts, etc. I suggest you apply the service brake in gear and give it a lot of throttle (power-brake)to determine if the engine is running smoothly or if it runs rough. Also, with the hood up, you can see the shaking if it occurs. If rough, check everything over and repair as necessary. If smooth, start checking ALL other vehicle systems and repair as necessary.
1helpful
1answer

Noise (vibration) when turning right

That sounds like a left front wheel bearing gone bad My friend.. turning right transfers weight to the left side and it probably has a roar similar to a turbo fan jet.. Try it and lemmie know.. thank you
1helpful
1answer

BRAKE DRAG & NOISE

check your calipers to make sure the pistons inside are moving and extracting evently
Not finding what you are looking for?

159 views

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...