Question about 1993 Ford Econoline

1 Answer

Heater blower motor wont work

I have jumped the blower motor to the battery and it blows fast. there seems to be 6 or 7 volts at the plug for the motor and the voltage does not change when the fan switch is adjusted on the dash.

Posted by on

  • go4it1959 Oct 29, 2008

    thank you. can you tell me where the resistor is located on the van?

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 70,387 Answers

You need to replace the blower speed control module/resistor assembly

Posted on Oct 29, 2008

  • yadayada
    yadayada Oct 29, 2008

    Near the the blower motor in the housing the blower sits in

  • rmeadows8820
    rmeadows8820 Feb 13, 2013

    i did the same mine still want come on?

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fan /blower in my Mercedes S280 1998 model not working no noises Just wont blow. All switch lights related to A/C ventilation are ok.


http://www.autozone.com/cooling-heating-and-climate-control/a-c-heater-blower-motor/everco-a-c-heater-blower-motor/mercedes-benz/c280/1998/6-cylinders-2-8l-mfi-sohc/385580_0_1526_5281/?checkfit=true

Jan 23, 2016 | Cars & Trucks

1 Answer

2000 ford explorer A C & heater fan won't blow at


Use a jumper wire and jump 12 volts to the blower moter and see if it comes on, make sure that you have a good ground. If the motor does not come on then it is going to be the blower motor.. hope that helps mmkayyyy

Sep 15, 2013 | Cars & Trucks

1 Answer

Interior blower fan relay 2002 overland


check heater/ac fuses first replace if bad..see if there is power to the blower motor connector if so reconnect and check ground wire for the motor.. if still no blow, take motor out and test for operation with 12 volt power supply(battery charger) replace if bad..good luck

Jan 16, 2013 | 2002 Jeep Grand Cherokee

1 Answer

A/c and Heater blower motor does not work at all with the controls in the dash. I have replaced with new blower motor and have also tested both the old and new motors. Both will blow when straight wired to...


Hello, did you check the ground wiring for a bad contact?

I don´t see any other reason why the motor would not run if it works connected directly to the battery and you have 12 Volts supply at the multiplug .

Jun 25, 2010 | 2001 Lincoln Town Car

6 Answers

1998 Ford Contour. The heater blower stopped suddenly. I checked all the fuses, good. I removed the blower and hooked it to 12 volts. Whoosh! It almost spun out of my hand. I checked the plug into the...


I dont know what these other guys are saying..I think they snif the glue!!! YOUR BLOWER FAN ASSEMBLY CAN EASILY BE REMOVED !!
1. Remove the wire
2.Find the "tab on the housing and pull it down while rotating the fan housing counter clockwise. This will remove the fan assembly. Plage 12 volts on the contacts to test the motor. If it works then the resister pack is blown. On the fan housing (near firewall ) you will see a plug going into a square looking box with a screw in it. Remove the wire then remove the screw to remove the resistor pack.. A new resistor pack is around 20 dollars at a ford dealer. Hope thie "FREE" info helps!

Feb 24, 2010 | 1998 Ford Contour

1 Answer

My heat and AC fan wont come on and all the fuses are fine


What I would do is pull the fan blower motor speed switch, plug the wires back into it while you're holding it in your hand, run the car, and check with a multitester and see if you are getting voltage at the switch. Should be something like:
High=12-14 volts
MHi=8-10 volts
MLo=4-6 volts
Low=2-4 volts
OFF=no voltage

If you get voltage but the fan still doesn't work, then it's either a bad ground, or the motor is bad. If you can access the blower motor wire connections(sometimes its easier to try this with it removed from the vehicle), then you could try jumping the blower motor at the wiring connection with a known good 12 volt source, and if you STILL can't get the motor to spin then it's seized up or it's just a bad motor. If you have the motor removed, try spinning the squirrel cage by hand. Is it stiff? Seized? Probably need a new one if it doesn't spin freely by hand.

Hope this helps!

Nov 08, 2009 | 2003 Saab 9-3

1 Answer

Blower motor doesn't blow anymore, This blows


If it blows only on high speed, it is the resister.
If it does not work at all, check fuses first. See owner manual for location.
Then check blower motor by jumping 12 volts from battery to blower motor. Make sure ground is jumped too.

If it works now, it's the control panel. If not, it is the motor.

Blower Motor —Front Removal and Installation
  1. Prepare the vehicle for blower motor (19805) removal.
    1. Disconnect the battery ground cable (14301). For additional information, refer to Section 414-01 .
    1. Remove the air cleaner assembly. For additional information, refer to Section 303-12 .
  1. Detach the speed control servo.
    1. Disconnect the electrical connector.
    1. Remove the bolt.
    1. Position the speed control servo aside.
  1. Position the coolant expansion tank/windshield washer reservoir aside.
    1. Remove the screws and the nuts.
    1. Position the coolant expansion tank/windshield washer reservoir aside.
  1. Remove the blower motor.
    1. Disconnect the vent hose.
    1. Disconnect the electrical connector.
    1. Remove the four screws.
    1. Remove the blower motor.
f285484.gif
Also,

Heater Blower Motor Switch Resistor(s)
The front heater blower motor switch resistor has the following features:
  • The assembly is located in the engine compartment on the evaporator housing (19850) next to the blower motor assembly (19805).
  • Three resistor elements are mounted on the resistor board to provide four blower motor speeds.
  • Depending on the heater blower motor switch position, series resistance is added or bypassed in the A/C blower motor circuit to decrease or increase A/C blower motor speed.
  • An overheating device (thermal limiter) will open the resistor coil circuit when the temperature reaches 121°C (250°F), interrupting the blower motor operation in all speeds except high.
  • The thermal limiter cannot be reset and is not serviceable.

Aug 10, 2009 | 2001 Ford Explorer Sport

1 Answer

I have 1991 honda accord, heater blower motor does run but very slowly in all speed positions i have removed the blower assbly. and motor seems to turn free. is there a speed control that may be bad ?


If you have removed the blower motor, Connect it to a 12 volt power supply(your battery)with some jumper wires.It should turn fast, be careful when you connect it, have a good grip on it, it will jump just a little. If it dont run fast its junk. The other 2 things
1)The fan switch
2) The resistor that slows the fan at low speeds.

Jun 14, 2009 | 1995 Honda Accord

1 Answer

Heater blower motor doesnt work. 1.3 volts going to plug to motor


resisters, follow wire from blower to small electric piece in the duct near your blower motor.

Dec 27, 2008 | 1997 Chevrolet S-10 Pickup

Not finding what you are looking for?
1993 Ford Econoline Logo

289 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...