- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
No , it has a PROM that plugs into the ECM ! The PROM - program read only memory chip . it has the engine operation information programed on it ! The ECM is located in Front seating area, passenger side, under dash, above passenger side of glove compartment cavity, mounted on firewall !
You got suckered; the JawDropper performance chip is nothing but a resistor in a fancy box. Google "Jawdropper performance chip" and read the many forum posts about it..Open the box and you'll find things that cost 10 cents at radioshack, put into a box with a sticker, priced at 20-40 bucks. Just toss it out.
I have found a link that should be able to help you. If you didn't already know, the fuse panel diagram is located on the inside of the fuse panel usually. If you cannot locate it there, you can download it in the link I provided. Be sure to read it correctly and take your time when locating a fuse. If you have any other questions, please feel free to contact me. Link: http://www.pdfoo.com/resultpage10~1995-audi-cabriolet-fuse-diagram.html
ECM LOCATED IN THE PASSENGER COMPARTMENT BY THE RIGHT SIDE KICK PANEL OR BEHIND GLOVE BOX.WHEN YOU FIND ECM.LOOK AT PART NUMBER ON ECM MAKE SURE PART NUMBER RIGHT.NOW ECM HAS A MEM - CAL ACCESS COVER.REMOVE ACCESS COVER.TO REMOVE COMPUTER CHIP OR MEM - CAL.FIRST YOU USE TWO FINGERS PUSH BOTH RETAINING CLIPS BACK AWAY FROM THE MEM - CAL AT THE SAME TIME GRASP THE MEM - CAL AT BOTH ENDS THEN LIFT IT UP OUT OF SOCKET. WHEN INSTALLING NEW COMPUTER CHIP OR MEM - CAL MAKE SURE YOU HAVE RIGHT PARTS NUMBER IF NOT YOU WILL DESTROY NEW CHIP.WHEN INSTALLING NEW COMPUTER CHIP OR MEM - CAL PRESS ONLY ON THE ENDS NOT THE MIDDLE.WHEN DONE.DO A DIAGNOSTIC TEST.TURN THE IGNITION SWITCH ON.ENTER DIAGNOSTIC MODE AT THE ALCL.SEE CODE 12 ALL IS GOOD IF YOU SEE CODES 41 42 51 OR 52 YOUR MEM - CAL OR COMPUTER CHIP NOT COMPLETELY SEATED OR DEFECTIVE.TO BE ON THE SAFE SIDE TAKE WHOLE ECM CASE TO DEALERSHIP LET THEM GET YOUR PART NUMBER OFF OLD ECM UNIT.THAT WAY YOU CANT GO WRONG.
Most cabin air filters are located inside the dash. Only way to access this area is through the glove box. Open glove box, remove/open the tabs and the glove box cover will drop down to gain access. Be sure to remove all items from the box or they will just dump out on floor. Behind the glove box using a flashlight you will see the filter, remove, replacement is reverse of accessing.
Then programmable read only memory (PROM) chip that you are asking about is located inside the electronic control module.
This module is located just above the glove compartment in the dash area.
Removal of the glove compartment is required to remove this module. After removing the ECM you will note a small access cover. Remove this cover and you are at the PROM.
Good luck, it is quite easy.