Question about 1990 Chrysler New Yorker

1 Answer

SERPENTINE BELT ROUTING

NEED TO KNOW WHERE I LOOSEN THE BELT FOR REPLACEMENT AND ROUTING INFO. V-6

Posted by on

  • john bennett
    john bennett Oct 29, 2008

    I GOT R DONE, THE TENSIONER PULLEY HAS TO BE USED TO LOOSEN, AND INSTALL NEW BELT. MY CAR WAS SO OLD THAT THE ROUTING WASNT POSTED. A LITTLE COMMON SENSE CAN GO A LONG WAY, I FIGURED IT OUT. THANKS FOR THE INPUT AND THANKS FIXYA.

  • rfkriz Dec 26, 2008

    There is no schematic under the hood to indicate routing of serpentine belt.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Chrysler Master
  • 70,387 Answers

There is a sticker under the hood that shows how the belt is routed

Posted on Oct 29, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I install a fan belt


all vehicles are different and we do not know yours . DO WE

Aug 03, 2016 | Cars & Trucks

1 Answer

I need a diagram for a 2011 dodge 2500 cummings serpentine belt.


Jeff, Check the attached links,instruction and guides, diagram for a serpentine belt, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Amps Belt routing Installation and system start up for 6 7L Cummins
Serpentine Belt Routing
Drive belt routing
2011 dodge 6 7 cummins serpentine belt diagram Google Search

May 22, 2016 | 2011 Dodge Ram 2500

1 Answer

Serpentine belt routing on 93 mercedes 190e 2.6


Go to the following link and the first photo shows the belt routing. I hope this helps as I know changing the belts on these vehicles can be a major pain in the neck.
Pelican Mercedes Benz Tech Article Mercedes Benz Drive Belt Replacement...

Dec 11, 2014 | 1993 Mercedes-Benz 190

1 Answer

Need a routing diagram for a 2004 ford e-250 carrier coach van


there should be a decal under the hood somewhere that shows the belt routing.

Aug 28, 2014 | Ford F-150 Cars & Trucks

1 Answer

I have a 1990 supreme cutlass and i don't know how to change the serpentine belt. What do I do?



2.8L and 3.1L Air Pump Belt

  1. Disconnect the negative battery cable.
  2. Loosen the air pump.
  3. Remove the worn belt.

To install:
  1. Adjust the belt to specifications and tighten the pump mounting bolts.
  2. Connect the negative battery cable.

2.3L Power Steering Belt
  1. Disconnect the negative battery cable.
  2. Loosen the adjustment bolts.
  3. Remove the power steering belt from the pulley.

To install:
  1. Route the belt around the pulley.
  2. Adjust the belt to specifications, then tighten the adjustment bolts.
  3. Connect the negative battery cable.

See Figures 6 through 15

0900c15280067989.jpg

Fig. Fig. 6: Unfasten the retaining bolts...


0900c1528006798a.jpg

Fig. Fig. 7: ... then remove the serpentine belt guard


0900c1528006798b.jpg

Fig. Fig. 8: ...


0900c1528006798c.jpg

Fig. Fig. 9: ... then remove the serpentine belt

  1. Remove the belt. Clean the accessory drive belt surfaces.



0900c1528006798d.jpg

Fig. Fig. 10: Serpentine drive belt routing-2.2L engine


0900c1528006798e.jpg

Fig. Fig. 11: Removal and installation of the serpentine belt-2.3L engine


0900c1528006798f.jpg

Fig. Fig. 12: Serpentine belt routing-2.5L engine with and without A/C


0900c15280067990.jpg

Fig. Fig. 13: Use an 18mm box end wrench on the pulley nut to rotate the tensioner on the 3.8L engine


0900c15280067991.jpg

Fig. Fig. 14: in. breaker bar to rotate the tensioner


0900c15280067992.jpg

Fig. Fig. 15: On the 3.4L, use a box end wrench, then rotate the tensioner clockwise and remove the serpentine belt

Remove the belt guard or coolant recovery reservoir as required.



Dec 31, 2010 | 1994 Oldsmobile Cutlass Supreme

2 Answers

Change serpentine belt on 06 sienna


  1. 1 Check to ensure the Sienna's engine is cold, then make sure the Sienna is in park, the ignition is in the off position and the key is removed from the ignition to prevent any possibility of the engine engaging during the serpentine belt replacement.
  2. 2 Open the hood and locate the serpentine belt routing diagram sticker on the side of the engine casing. Study it for a moment before removing the existing belt. It is essential the new belt be installed exactly as the diagram indicates.
  3. 3 Find the tensioner pulley, the main pulley that controls the serpentine belt, and fit a 1/2-inch socket wrench over the self-tensioner on the outside of the pulley.
  4. 4 Pull the wrench to the left to move the pulley forward, which loosens the belt, then remove the belt.
  5. 5 Compare the old serpentine belt with the new, replacement belt for length, width and number of grooves on the belt's underside. Be certain the replacement belt is the right part.
  6. 6 Fit the new belt on to each pulley according to the serpentine belt routing diagram on the manufacturer's sticker, or according to the drawing made prior to removing the old belt. Fit the new belt on to the tensioner pulley last, again applying pressure on the pulley's self-tensioner with the half-inch socket wrench to loosen the pulley.
  7. 7 Release the pressure on the self tensioner and allow the tensioner pulley to ease back into place, thereby tightening the new serpentine belt with the appropriate tension.
  8. 8 Remove the wrench and close the hood.
Thank you and good luck,
Lee

Aug 26, 2010 | 2006 Toyota Sienna

1 Answer

Belt replacement diagram 2000 mazda mpv


REMOVAL & INSTALLATION Because serpentine belts use a spring loaded tensioner for adjustment, belt replacement tends to be somewhat easier than it used to be on engines where accessories were pivoted and bolted in place for tension adjustment. Basically, all belt replacement involves is to pivot the tensioner to loosen the belt, then slide the belt off of the pulleys. The two most important points are to pay CLOSE attention to the proper belt routing (since serpentine belts tend to be "snaked'' all different ways through the pulleys) and to make sure the V-ribs are properly seated in all the pulleys. Although belt routing diagrams have been included in this section, the first places you should check for proper belt routing are the labels in your engine compartment. These should include a belt routing diagram which may reflect changes made during a production run.
  1. Disconnect the negative battery cable for safety. This will help assure that no one mistakenly cranks the engine over with your hands between the pulleys, and that the cooling fan cannot activate while servicing the belt(s). NOTE: Take a good look at the installed belt and make a note of the routing. Before removing the belt, make sure the routing matches that of the belt routing label or one of the diagrams in this book. If for some reason a diagram does not match (you may not have the original engine or it may have been modified), carefully note the changes on a piece of paper.
  2. For tensioners equipped with a 1⁄2 in. (13mm) square hole, insert the drive end of a large breaker bar into the hole. Use the breaker bar to pivot the tensioner away from the drive belt. For tensioners not equipped with this hole, use the proper-sized socket and breaker bar (or a large handled wrench) on the tensioner idler pulley center bolt to pivot the tensioner away from the belt. This will loosen the belt sufficiently that it can be pulled off of one or more of the pulleys. It is usually easiest to carefully pull the belt out from underneath the tensioner pulley itself.
  3. Once the belt is off one of the pulleys, gently pivot the tensioner back into position. DO NOT allow the tensioner to snap back, as this could damage the tensioner's internal parts.
  4. Now finish removing the belt from the other pulleys and remove it from the engine. To install:
  5. While referring to the proper routing diagram (which you identified earlier), begin to route the belt over the pulleys, leaving whichever pulley you first released it from for last.
  6. Once the belt is mostly in place, carefully pivot the tensioner and position the belt over the final pulley. As you begin to allow the tensioner back into contact with the belt, run your hand around the pulleys and make sure the belt is properly seated in the ribs. If not, release the tension and seat the belt.
  7. Once the belt is installed, take another look at all the pulleys to double check your installation.
  8. Connect the negative battery cable, then start and run the engine to check belt operation.
  9. Once the engine has reached normal operating temperature, turn the ignition OFF and check that the belt tensioner arrow is within the proper adjustment range. Fig. 1: Often the underhood label will display the serpentine drive belt routing 88231p43.gif
    Fig. 2: Relieve the belt tension by pivoting the automatic tensioner away from the belt, then remove the belt 88231p44.gif
    Fig. 3: Verifying serpentine belt alignment in the pulley 79244g60.gif
    Fig. 4: Fig. 1 Accessory V-belt routing (alternator) — Mazda MPV 3.0L engine 79244g67.gif
    Fig. 5: Fig. 2 Accessory V-belt routing (power steering) — Mazda MPV 3.0L engine 79244g66.gif
    Fig. 6: Fig. 3 Accessory V-belt routing (A/C compressor) — Mazda MPV 3.0L engine 79244g65.gif
prev.gif next.gif

Jul 08, 2010 | 2000 Mazda MPV

2 Answers

Need diagram of drive belt assembly forcaddy


You didn't list your motor size so please pick the applicable diagram:

ba0b112.gif
Accessory serpentine belt routing—4.8L, 5.3L & 6.0L engines

9dcebd3.gif
Accessory serpentine belt routing—5.7L engines with A/C

bb89ba7.gif
Accessory serpentine belt routing—5.7L engines without A/C

27f4999.gif
Accessory serpentine belt routing—6.5L Diesel engines

4d67005.gif
Accessory serpentine belt routing—7.4L engines

491a0a4.gif
Accessory serpentine belt routing—8.1L engines

Oct 26, 2009 | 2002 Cadillac Escalade Ext

3 Answers

NEED DIAGRAM FOR ROUTING THE SERPENTINE BELT


PLEASE DON'T FORGET TO RATE--You didn't post the size of motor so please pick the applicable one:

e8f5627.gif
Accessory serpentine belt routing—4.8L, 5.3L and 6.0L engines

793398d.gif
Accessory serpentine belt routing—4.3L, 5.0L and 5.7L engines without A/C

b701ba4.gif
Accessory serpentine belt routing—4.3L, 5.0L and 5.7L engines with A/C

a8d5a93.gif
Accessory serpentine belt routing—6.5L Diesel engines

7f5d3cb.gif
Accessory serpentine belt routing—7.4L engine

10dba31.gif
Accessory serpentine belt routing—8.1L engine

Oct 22, 2009 | 2004 Chevrolet Express

2 Answers

How does the serpentine belt go on for 1995 grand cherokee..."inline 6


Diagrams WRITE BACK i need to know the Picture shows for you does on my end Fig. 32 Serpentine Drive Belt Routing. 4.0L/6-243 W/air Conditioning & Power Steering 42236453PLEASE RATE ME Diagrams Notes Fig. 30 Serpentine Drive Belt Routing. 4.0L/6-243 Less Air Conditioning 42236452

Jan 16, 2009 | 1995 Jeep Grand Cherokee

Not finding what you are looking for?
1990 Chrysler New Yorker Logo

Related Topics:

198 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6880 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...