Question about 2004 Land Rover FreeLander

3 Answers

No heat coming through the heater . Freelander 1.8 petrol

Posted by on

  • marinovaccar Dec 30, 2008

    I've got the same problem ,found on internet that you can solve this by instead of EGR and Heater bein in parallel connedting both in series, bleeding the cooling system also helps.

  • Anonymous Mar 23, 2014

    heater not warming up

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Yes open the plastic valve on the top in pipe to the heater while the engine is not running air will be expelled retighten and start run till temp gauge half way up the dial if this does not happen then its the Thermostat hey presto heat should make toast

Posted on May 17, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Make sure you havent a coolent leaking problem as this will cause air blocks resulting in lack of heat from heater

Posted on Dec 06, 2008

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 231 Answers

Check that your gate valve on your heater control is working, also check your thermostat. Good luck and remember to rateall tje replies you get. Thanx.

Posted on Oct 29, 2008

2 Suggested Answers

  • 1 Answer

SOURCE: fuel filter freelander (petrol)

The fuel fillter is in the but you shouldnt have to drop the tank to get to it or the pump. Lift the back seat and you will see a plate held in place with screews take this off. Below this is a steel plate that you will have to spin off may need help fro a hammer as they are tight. Some are badged BWM. This gets you to the fuel pump and the filter

hope it helps

Posted on Sep 07, 2009

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Lately my freelander cranks but no start.


2001 2003 LAND ROVER FREELANDER SERVICE MANUAL
just download the service manual and all your queries will be solved :)

Jan 16, 2016 | 2002 Land Rover Freelander

1 Answer

How to reset timing marks after replacing a broken timing belt?


Land Rover Freelander 2002-2005 KV6 Timming belt and ...

? 4:31
https://www.youtube.com/watch?v=sz_oe9tIFH4
Jul 3, 2011 - Uploaded by Jaime Depaula
Land Rover Freelander 2002-2005 KV6 Timming belt andreplacing valves - Video 2 ... shops in North Eastern USA for bent valves and timing belt change? .... Land Rover 200tdiTiming Belt -From Broken Belt to Retiming the ...

ROVER K Series Cambelt Change Video - YouTube

? 10:52
https://www.youtube.com/watch?v=1Qn8ljQKZxA
May 4, 2012 - Uploaded by metalworker007
How to change a rover K series cam belt .. by Technozen of ...soy espa?ol porfavor quiero saber timing marks de MG ROVER 25 petrol 1795cc engen .... Hi, Have a Land Rover Freelander1999 petrol serie K, that dont start, ...

Freelander 1.8i timing belt - Land Rover Technical Archive - LR4x4 ...

forums.lr4x4.com > ... > Tech Archive > Land Rover Technical Archive

Nov 20, 2006 - 1 post - ‎1 author
The following is instructions for replacing the timing (or camshaft) belt on the 1.8i petrol engine, as fitted to a Freelander. This is the K-series ... With the timing set, thecam sprocket marks should look like this. Posted Image

How to Replace timing belt on Land Rover Freelander 2.5 ...




Dec 10, 2015 | 2002 Land Rover Freelander

1 Answer

HOW TO CHANGE LAND ROVER FREELANDER FUEL FILTER 2012 PRIMING AND BLEEDING


which engines, you do know the engine size, type ,name and gas/diesel , dictates what fuel system you have, right?
most gas cars, USA have moved this to the inside of the gas tank
by uSA EPA edicts. i sure as heck cant speak for non USA cars.
lacking the engine facts or country.

gen4, line up
3.0 L V6 Petrol
5.0 L V8 Petrol
3.0 L V6 Diesel
4.4 L V8 Diesel[1]

which one?

state side the EPA mode the filter inside the tank. to lower fuel heating and bingo evaporation losses (fact)

Dec 27, 2014 | Land Rover Cars & Trucks

1 Answer

Resetting ecu on Freelander 1.8 petrol


check the timing , but give it a couple of days to reset itself . also check to see if you missed any elec. connectors

Feb 26, 2014 | Cars & Trucks

1 Answer

Heated rear window does not work . ive checked the obvious problems 54 plated freelander (face lift model) regards


TRY PUTTING 12 VOLTS RIGHT TO THE WINDOW HEATER. USE ANOTHER BATTERY, UNPLUG THE HEATER FROM THE CAR FIRST.

Nov 25, 2010 | 2004 Land Rover FreeLander

2 Answers

Hi, 2000 Landrover Freelander 1.8 petrol, failed MOT on CO emissi


check both lambda sensors for breaks in wires and for open circuit on heater side of lambda sensor on the one under the car on the second cat,failed heater element will not heat gas engough for sensor to read causing false readings , also check for slow i.a.c valve on inlet manifold.

Sep 26, 2009 | 2002 Land Rover Freelander

1 Answer

2002 Land Rover ~ Freelander - No heat coming from the heater


Look for two water lines about 1 in in diameter running back toward the condensor unit in the firewall. On one of those lines will be a control. It is sometimes vacum controlled. When they are vacum conrolled they have a tendency to get stuck or you may have lost vacum to the unit. You can use a vacum tester and short piece of hose to test this to see if you have lost vacum or if it is stuck closed. Connect the test hose to the control on teh hose and apply vacum to the unit. If the valve opens you will get heat in the vehicle. If it does not open then it is stuck in the closed position and will need to be replaced in most cases.

Sep 10, 2009 | 2002 Land Rover Freelander

1 Answer

Intermittent starting problem landrover freelander 01 v6 2.5 mode


Hi,
Judging by the problem you have a 1.8 petrol engine?,if it is they used to over fuel on start up ,you can try changing the engine coolant temp sensor as this is the usual cause ,if not then some more info on the vehicle would be usefull.

Jul 12, 2009 | 2002 Land Rover Freelander

2 Answers

Land Rover Freelander heater/fan switch not working


u need a Freelander Blower Fan Speed Repair Kit
go on e-bay Item number: 160320517862

Mar 09, 2009 | 2002 Land Rover Freelander

Not finding what you are looking for?
2004 Land Rover FreeLander Logo

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top Land Rover Experts

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

yadayada
yadayada

Level 3 Expert

63456 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Land Rover Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...