Question about 1999 Dodge Ram 2500 4WD

1 Answer

1999 Dodge Ram 2500 4WD, Transmassion will not up shift.

My transmission will not upshift. I thought the transmission failed so I took the truck to a transmission shop and verified the transmission was the problem. After a transmission rebuild that I removed and replaced I still have the problem. Transmission shop sees a code of P1693 in the PCM. Any suggestions with a fix?

Posted by on

  • Anonymous Dec 14, 2008

    have same problem on my 99 DOdge Ram 2500 2-wheel drive with 79000-miles but can not find the OBD II port to connect my AutoXray scanner.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Sounds like a problem i had on my 96. but, check the muffler.If the KAT converter is pluged , it wont shift into 3rd, at 45mph. Witch the OBD and 3 techs couldnt find.This unit only cost me $100.00.Better than 2 grand. Let me know.

Posted on Nov 16, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Ram van. Why isn't transmission shifting?


Nathaniel, Check transmission fluid level and top up if required.
It does sound like a problem with shift solenoids, and should be checked and diagnosed by a good transmission tech.

Apr 20, 2016 | Dodge Cars & Trucks

1 Answer

1999. When I reverse out of driveway then shift to move forward, why does engine fail?


Bernard's Blog: Dodge Transmission Output Speed Sensor

bernardsblog.blogspot.com/.../dodge-transmission-output-speed-sensor.h...
Sep 8, 2009 - The code was straight forward - PO720 - Output Speed Sensor Circuit.... words but if you've never seen the underside of a 1999 Dodge Ram 1500 pickup ...My 99 Dodge 2500 Ram won't accelerate..transmission is NOT ... RR - If the engine revs but the vehicle doesn't speed up then the trans is slipping.

Sep 16, 2015 | Dodge Ram 1500 Cars & Trucks

1 Answer

Wont shift out first


it is probly in the valve body in the trans

Nov 13, 2013 | Dodge Cars & Trucks

1 Answer

I have a 2007 Dodge 2500 cummins with 108000 miles on it when it shifts from first too second it will redline before it shifts and then sometimes you have to let off the gas too get it too shift and it...


MOST DODGES (NOT THE MOTOR BUT THE TRANS HAS A SHIFT SOLINOID IN THE TRANS
THIS PART IS ABOVE THE VALVE BODY OF THE TRANS SO IT IS NOT EASY TO REMOVE
BUT YOU CAN DO IT WITH OUT DROP[ING THE TRANSMISSION YOU WILL IN MOST CASES HAVE TO REPLACE THE VALVE BODY GASKET
THE SOLINOID IS ABOVE THE VALVE BODY ...
YOU WILL BE ABLE TO SEE IT ONCE YOU REMOVE THE VALVE BODY REPLACE THE SOLINOID SHOULD HELP WITH YOU SHIFTING PROBLEM

Apr 19, 2010 | 1999 Dodge Ram 2500 4WD

1 Answer

My transmission is not shifing right


With truck running check transmission fluid level add if low

Jul 10, 2009 | 1999 Dodge Ram

2 Answers

1999 Dodge Ram 1500 4X4 Won't upshift


Is the 1-2 shift at the right speed or is it high? Does Reverse work? Does it just not shift into 3rd or does it slip?

Apr 04, 2009 | 1999 Dodge Ram

1 Answer

2001 dodge transmisson wont shift up code 1762


Code 1762 is the governor pressure code which indicates an internal transmission problem with presssure to the governor which initiates the upshift. This may have been a previous problem and remaining in history or there still may be a problem. I would clear the code and drive it some more. If the code comes back, you will need a transmission specialty shop to diagnose the internal transmission problem.

Mar 23, 2009 | 2001 Dodge Ram 1500 Truck 2WD

1 Answer

1999 DODG 3500 AUTO TRANS SHIFTS TO 2ND WITH A LITTLE HELP


I have a 1999 Ram B 1500 Van, auto transmission, 5.9 L engine.
Same problem, trans hesitates in 2-3 upshift, sometimes 1-2
to 2-3 upshift. Posts trouble code P1756 - Transmission Govenor pressure too low at below 15 to 20 Psi. Transmission pump shot or valve body leak stops trans from reaching proper pressure to shift, which is minimum 15 Psi.
Either trans is leaking in valve body, valve is stuck, shift solenoid on valve body is sticking, or pump is shot.

Feb 14, 2009 | 1999 Dodge Ram

1 Answer

1999 Dodge Ram 1500 2WD won't shift properly


Sounds like the speed sensor on the rear axle.

Jan 20, 2009 | 1999 Dodge Ram

Not finding what you are looking for?
Cars & Trucks Logo

540 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...