2010 Lexus HS 250h Logo

Related Topics:

A
Anonymous Posted on Feb 25, 2012

Reset oil maintenance on lexus HS 250 - 2010 Lexus HS 250h

4 Related Answers

briang9000

Brian Greer

  • 37 Answers
  • Posted on Dec 18, 2008

SOURCE: Lexus RX350 Reset Maintenance required light

PRESS AND HOLD IN THE TRIPOMETER RESET BUTTON. WITH IT IN, TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE ENGINE. THE DISPLAY WILL COUNT DOWN IN HASH MARKS FROM 6 TO 0. AFTER IT REACHES 0 RELEASE THE TRIPOMETER RESET, TURN THE KEY TO THE OFF POSITION. ONCE YOU RESTART THE LIGHT SHOULD BE OFF.

Ad

Anonymous

  • 379 Answers
  • Posted on Jan 02, 2009

SOURCE: Lexus IS 250-

1. turn engine off , 2. press trip meter reset knob and hold it , turn ignition on , with the engine off, continue to press and hold reset knob until the trip meter displays "00000" , reminder light will turn off . if system fails to reset , repeat procedure . +

Anonymous

  • 28 Answers
  • Posted on Nov 04, 2009

SOURCE: Need to reset oil maintenance required light on my

hello
you can take the Negative wire off the battery for about 10 minute and reinstall it if it not working you need to take the car to autozone or advance auto parts to reset it ( Free ) no charge good luck.

mecanica03

ROBERT GARCIA

  • 926 Answers
  • Posted on Jul 15, 2010

SOURCE: Reset Maintenance light for 2008 lexus rx 350

to reset, push odo buttom hold until put key on w/o start engine several seconds

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How to reset oil maintenance switch

I believe it might be in manual also. Here is instructions.
Switch the display to the trip meter "A"
Turn the "POWER"switch off.
(If you have push button start)
While pressing the trip meter reset button turn the "POWER" switch to ON mode (press power button 2 times, foot off the brake).
Continue to press and hold the button until the trip meter displays "000000"and the multi-information display indicates that the reset is complete. or you here a beep.
1helpful
1answer

Can't reset oil gauge on 2006 Lexus 430

Instructions
    • 1 Turn the ignition switch to "ON" without starting the engine.
    • 2 Press the trip odometer button to change the display to the total mileage.
    • 3 Turn the ignition switch to "OFF."
    • 4 Press and hold the trip odometer button. Turn the ignition switch to "ON."
    • 5 Release the trip odometer button when the oil change maintenance light resets.
0helpful
1answer

How do I reset oil maintain reqd

1.With the car turned OFF, locate and hold down the odometer reset stick on the instrument panel.
2.WITHOUT your foot on the brake, press the engine start button twice while holding down the odometer reset.
3.Now...Your odometer reading will show some dashes that begin to go away one at a time. When the go away you are finished and your next scheduled maintenance has been reset in your IS computer and will alert you again at that time. Hope this helps
Read more: How to reset your oil change light on a Lexus IS250 or IS350 ' eHow.com http://www.ehow.com/how_5210681_reset-oil-change-light-lexus.html#ixzz1ZDyReSum
0helpful
1answer

The maintenance light on my vectra will not go off what the cure

press the odometer reset button,hold it down, then turn on ignition,wait 10secs, it should reset.
1helpful
1answer

In addition to an oil change at 10000 miles, what else is recommended for maintenance? THis is for IS250

Inspect - Brakes, Rotors and brake pads.
Replace smart key battery, coolant,oil and filter.
Reset ( Maint Reqd ) light after oil change, if vehicle equipped with light.
Rotate tire's
Road test - While driving vehicle, check for proper operation of engine, transmission, brakes and steering also check for abnormal noise or vibration from any part of the vehicle.
16helpful
3answers

Lexus IS250 2009 - Oil light

While pressing and holding the odometer reset button press the IGN button twice without your foot on the brake. The display will show some dashes and finally 00000.
The service reminder should be reset.
Hope it will help
Dan
3helpful
1answer

How do you reset the "maintenance required" on a 2006 Lexus LS 430?

1. Push the “ODO/TRIP” button to change the display to
blank.
2. Turn the ignition off.
3. Turn the ignition switch to “ON” with the trip meter
“RESET” button held down.
4. Keep pushing the “RESET” button for longer than 5
seconds after the ignition is turned on.
After the above operation, the master warning light comes
on, a warning tone sounds and the message
appears to inform you that the engine oil maintenance data has been reset.
11helpful
1answer

Lexus IS 250-

1. turn engine off , 2. press trip meter reset knob and hold it , turn ignition on , with the engine off, continue to press and hold reset knob until the trip meter displays "00000" , reminder light will turn off . if system fails to reset , repeat procedure . +
142helpful
2answers

Lexus RX350 Reset Maintenance required light

PRESS AND HOLD IN THE TRIPOMETER RESET BUTTON. WITH IT IN, TURN THE KEY TO THE ON POSITION WITHOUT STARTING THE ENGINE. THE DISPLAY WILL COUNT DOWN IN HASH MARKS FROM 6 TO 0. AFTER IT REACHES 0 RELEASE THE TRIPOMETER RESET, TURN THE KEY TO THE OFF POSITION. ONCE YOU RESTART THE LIGHT SHOULD BE OFF.
Not finding what you are looking for?

957 views

Ask a Question

Usually answered in minutes!

Top Lexus Experts

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Brad Brown

Level 3 Expert

19187 Answers

Are you a Lexus Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...