Question about 2004 Mitsubishi Endeavor
I was told my driver door lock actuator was the reason the drivers door would not lock when I hit the key fob.However, I did change the lock actuator, and it still does not work. All the other doors will lock,and unlock with the key fob.
Check the wires in the rubber boot between the door pillar and the door for a break in the wire or loose plug socket ,check for a feed to the lock with a multimeter as well whilst operating the system as i think this is your problem here -no power
Posted on Feb 25, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 Mitsumishi Endeavor
The front three should be easy enough. They are right in front of the intake plenum. (big black plastic looking thing on top of the engine. The back three are underneath the intake plenum. It seems like a lot to tackle but it is really not that bad.
As always, if you are not sure you have the skills to attempt this go to a qualified mechanic. I did mine in an afternoon.
Posted on Jul 21, 2008
Basically you can use Dextron/ATF SPIII M but MMC recommends Diaqueen as it has been engineered for them and for warranty purposes as well.
Posted on Apr 23, 2009
Tips for a great answer:
Nov 01, 2015 | Cars & Trucks
Jul 08, 2012 | 2003 Mini Cooper
Jan 30, 2011 | 2004 Honda Odyssey
Jun 11, 2010 | 2004 Mitsubishi Endeavor
Sep 24, 2009 | 2004 Ford Focus
Jun 07, 2009 | 2004 Land Rover Discovery
May 17, 2009 | 2003 Nissan Murano
Jan 09, 2009 | 2004 Mitsubishi Endeavor
Jun 09, 2008 | 2004 Honda Civic
864 people viewed this question
Usually answered in minutes!