Question about Peugeot Cars & Trucks
I have a 2009 Peugeot 308 2.0L HDi, currently has performed 40 000km. Today it brought up Depollution System Faulty on the central dash unit. Vehicle had just been driven 40km along the highway. After taking off after a red traffic light, the motor lost all power, like going into limp mode, which we proceeded the last 5km home. After parking it up, about an hour later we went out again in it for a 5 km drive, which was no problem with full power and warning not displayed. At 20 000km we had the same problem, taking the vehicle back to a Peugeot dealer 4 times in 2 weeks, with the final repairs being 4x new diesel fuel injectors. After reading many forums, it looks a common failure across the Peugeot range. Also reading more about this issue, it is advised to take the car out for a good thrash for 20+ km to heat the vehicle depollution system up to rectify the problem. Will give it a go tomorrow, but hold reservations if it would work. Any idea's. Thankyou
We had that problem and it turned out to be a broken engine coil. This is a generic message for a number of faults. You will need to take it to a garage.
Posted on Feb 08, 2013
Well its a 2009 and as such its all electronic control and it can only be diagnosed using the dealer software via the internet this is to stop people like myself from doing anything to it ,from the sound of it i would suspect the throttle position sensor under the dash on the end of the throttle pedal as this fault i have had before on more than one occasion even more so with my favourite )not( make of vehicle a renault but in all honesty you are in the hands of the dealers here as they are the only ones with access to the software via the internet with the factory ,Sorry i cannot give you a nice fixya easy type fix
Posted on Feb 25, 2012
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
o2 sensor needs to be replaced and computer reset by disconnecting battery negative cable for 1/2 hr then reconnecting. Good Luck!
Posted on Oct 20, 2011
Tips for a great answer:
Nov 29, 2016 | Peugeot Cars & Trucks
Jun 20, 2016 | Peugeot Cars & Trucks
Nov 22, 2014 | Peugeot Cars & Trucks
Nov 01, 2013 | Peugeot 207 Cars & Trucks
Oct 20, 2011 | 2005 Peugeot 405
Dec 27, 2009 | 2006 Peugeot 405
4,542 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: