Question about 2004 Ford Crown Victoria
The key doesn't work in the door locks?
If that's the case than your only alternative is to call you local towing company or locksmith and have then perform a lockout service.
Posted on Feb 25, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: We have a 2004 Ford
there is a common problem with these cars it is called a lighting modual that very well could be the problem ..the proper way though is to check all the fuses first and make sure the bulbs are good
Posted on Nov 21, 2010
SOURCE: door panel
Depends on what door trim you are trying to replace. If you are trying to replace the door trim on the front doors you need to remove two screws from behind the casing around the door handle and then remove a screw from the bottom left of the door and then there will be a screw on the left of the door as high as the arm rest on the door. Finally pull up on the door panel and out to remove the panel. Remove the harnesses and you are complete.
If you are trying to remove the rear doors you need to remove a screw from the bottom of the door again near the left side then remove the screw from behind the casing that surrounds the door handle. Finally pull up on the door panel and out to remove the panel. Remove the harnesses and you are complete.
Posted on Apr 23, 2009
those control units in the crown vics **** out all of the time. they're not cheap from the dealer, try auto parts stores for aftermarket or junk yards.
one trick we did with cabs was to pull the unit out and splice the black and blue vacuum lines together. that's great for summer, but you have only vent then.
Posted on Oct 04, 2009
Tips for a great answer:
Sep 19, 2016 | Ford Crown Victoria Cars & Trucks
Aug 01, 2012 | 2004 Ford Crown Victoria
Jul 09, 2012 | 1999 Ford Crown Victoria
Jun 19, 2012 | Ford Crown Victoria Cars & Trucks
Jan 18, 2012 | 1997 Ford Crown Victoria
Oct 02, 2010 | 2004 Ford Crown Victoria
May 20, 2010 | 2004 Ford Crown Victoria
Oct 02, 2009 | 2004 Ford Crown Victoria
Jul 12, 2009 | 2004 Ford Crown Victoria
285 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: