Question about Cars & Trucks
Hi, I got problem with my immobiliser, I have the auto watch immobiliser 629Ti already installed when I bought my van. All worked fine but actually my key is not recognized anymore and I don't know why! I have only one key and I would like to know what can I do? I can start my engine with the pin code but it's very embarrassing to make this process all the time.. Can I desactivate the immobiliser or reprogram my only key? I apologize for my English and thank for your answers
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Citroen C15 Diesel Van.
It definitely sounds like the electrical part of your ignition isn't working properly.When you turn the key, the lck and tumbler turns on the ign. switch in which sends power to the rest of the car.
Posted on Jun 23, 2008
hold the central locking button down on the centre consul inside the van for more than 5 seconds the doors should lock Then unlock,then press the key fob within ten seconds the doors will lock and unlock again this will re- program the key code
good luck jk
Posted on Feb 05, 2009
Hi it sounds like you have done everything you can do, it now looks like your going to need to get the immobilizer reset, this can be done at most garages but its best if you shop around to see the best price you can get as its not cheap.
have you tried locking the door with the key and then opening it with the key then try the car see if it will work.
failing that its going to need the imob re-programming so that it accepts your key fob, it may just be that you need the fob replacing as the chip inside could have failed they will be able to test all this for you.
let me know if you need further assistance, not that theirs much more i can do without being their with the equipment to test the immobilizer, hopefully it will just be the fob that needs replacing.
you could just try one last thing when you get in the car and put the key in the ignition try holding the fob as close as you can to the ignition barrel as this is where it picks the signal up from so try holding it close to their and see if that then lets you start the car
failing that its going to be a trip to the garage.
plz rate this solution as i have a whole page of unrated posts, thanks
Posted on Aug 31, 2010
Tips for a great answer:
Jun 07, 2014 | Cars & Trucks
Nov 21, 2013 | Cars & Trucks
May 29, 2011 | Toyota Corolla Cars & Trucks
Jan 30, 2011 | Audi A8 Cars & Trucks
Feb 13, 2010 | 2007 Chevrolet Silverado Classic SS New...
Jun 10, 2009 | 2003 Renault 181
Aug 11, 2008 | 2002 Jaguar X-Type
126 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: