Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The adjustment screws/nuts should be located either on the top of the headlamp assembly,
behind the headlamp assembly, or near the frame rail by the radiator
You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well
Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)
If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.
Posted on Sep 30, 2009
Tips for a great answer:
Feb 02, 2016 | 2000 BMW 3 Series
Sep 24, 2015 | BMW Cars & Trucks
Mar 31, 2011 | BMW 325 Cars & Trucks
Mar 01, 2010 | BMW 750 Cars & Trucks
Oct 31, 2009 | 2007 BMW 525xi Sedan
Sep 14, 2009 | 2006 BMW Z4 Roadster
Nov 18, 2017 | Cars & Trucks
262 people viewed this question
Usually answered in minutes!