Question about 2009 Toyota Camry Hybrid
Master warning indicator light remains on
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Under the engine in the front you will see an aluminum cover.There is a square hole that fits a 3/8 ratchet remove this first.The new filter comes with a drain adapter that snaps in the hole under the cover.This lets the oil in the housing drain.Then take a oil filter cup wrench or a big channel lock to twist of the larger portion.Then change the filter and o-ring and reinstall.Make sure the o-ring on the square drive cover is there also
Posted on Nov 30, 2008
There is a problem with the door switch the door is not pushing the switch in completely. Here is what you do close all the doors, then you open them one at a time with all the other still closed. start with the drivers door. open and look for the pin with that the door touches when you close its on the bottom close to the back of the driver's seat it has a black rubber covering it. Press with your thumb in and see if light goes out. Check all other doors in the same way you will see which door switch is not being pressed in completely when door closes. If you find it a quick fix is to pad the area on the door that makes contact with the switch to push it in, for example you can use one of those round sticky cushions that you use on the metal chair legs to prevent them from scratching your wood floor. However if you can solve the problem in this way you may have to take it to electrical mechanic or I will be able to provide more help. contact me and leave me a feedback. Good LUCK
Posted on Dec 12, 2008
If your sure ALL of your bulbs are good(front and rear)then your bulb check relay is bad its usually in the trunk area,hope it helps have a good dayDB
Posted on Feb 17, 2009
To disable this light without unplugging the battery:
1. Start the car.
2. Place odometer on Trip A
3. Turn car off
4. Place your finger and hold the odometer trip button
5. Turn key to the "on" position while holding the trip button; not "acc"
6. Wait until the computer reset finishes
7. The maint reqd light will turn off
Posted on Dec 07, 2009
Tips for a great answer:
Sep 03, 2014 | 2009 Toyota Highlander V6
Jun 05, 2012 | 2000 Chrysler Grand Voyager
Oct 05, 2010 | 2009 Toyota Camry Hybrid
Jan 08, 2010 | 1998 Toyota Camry
Dec 07, 2009 | 1993 Toyota Camry V6
Nov 21, 2009 | 1992 Toyota Camry V6
Oct 04, 2009 | 2009 Toyota Camry Hybrid
Jul 18, 2009 | 2009 Toyota Camry Hybrid
Jul 18, 2009 | 1993 Toyota Camry V6
347 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: