Question about 2000 Oldsmobile Bravada

Open Question

How do you set the ignition timing on the distributor for a 2000 oldsmobile bravada

Need to set the timing for the 2000 bravada

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
ftw1952
  • 10319 Answers

SOURCE: to remove a fan clutch on oldsmobile bravada

You should remover the fan blade first the the fan clutch. Both have four bolts attaching to each part

Posted on May 25, 2009

Ad
  • 2 Answers

SOURCE: 2000 Oldsmobile Bravada SmartTrak...not sure how

Fan in Auto
Temp where you want it.
Air position in Auto

TEmp control will do the rest for you!

Posted on Nov 13, 2009

  • 88 Answers

SOURCE: AWD on 2003 Oldsmobile Bravada

possibly, but the most common problem is the engagement motor located on the rear of the transfer case. Motor looks like small wiper motor and can be replace fairly easily.

Posted on Dec 26, 2009

  • 2926 Answers

SOURCE: Need infor for Oldsmobile Bravada 300 SUV R&R front differential

This is a HUGE job that will require mechanical skills and a goo repair manual. This question can not be answered in it's entirety in this post.

Posted on Jan 17, 2010

wracefans24
  • 1985 Answers

SOURCE: where is the fuel pump relay switch located under

it should be in the distribution center with the other relays under the hood

Posted on Jan 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why wont it start when it rains?


water or condensation getting in the distributor cap. you can get a new one for $20.00 online. Distributor Cap for 2000 Oldsmobile Bravada Hope this helps.

Jun 27, 2014 | 2000 Oldsmobile Bravada

1 Answer

Oldsmobile bravada starts then stalls


How about the ignition swich? They have been recalled on this model I think, call the dealer with your vehicles VIN and find out.

Mar 21, 2014 | 1999 Oldsmobile Bravada

1 Answer

What should my timing be on a 1997 olds bravada at idle and at max advance


There are no specifications for what you are asking for. Timing is checked by using a scan tool and reading the camshaft offset at idle. It should be 0 +/- 2 degrees. This is NOT adjustable. This is only for reference to see if there is excessive play in the timing chain or the distributor shaft.
Here is what the service manual states about ignition timing:

"NOTE : The Distributor is located in a fixed, non-adjustable position. No attempt should be made to adjust the engine base timing by rotating the distributor. Attempting to do so may result in engine cross-fire and mis-fire conditions. Timing is not adjustable."

Sep 13, 2011 | 1997 Oldsmobile Bravada

2 Answers

Explaine the firing in a 2001 bravada. I need to know if it has coil packs or distrubutor or ...


Your vehicle has a distributer cap and rotor. Below is the firing order for you. I hope this helps and good luck.


clifford224_385.jpg

Aug 27, 2011 | Oldsmobile Bravada Cars & Trucks

1 Answer

How to remove front spindle nut on a 2000 Oldsmobile Bravada


The 2000 Oldsmobile Bravada spindle nut is 36mm, and the Torque specification is 203 ft-lb.
To remove the nut you need a very powerful impact drive, or 1 inch drive socket tool.

Oct 10, 2010 | 2000 Oldsmobile Bravada

1 Answer

Low power and missfire, have replaced bad distributor and rotor. 2000 Oldsmobile Bravada AWD. Where are the fuel pump and filter located?


I have replaced Distributor cap, rotor, wires, and spark plugs in my 2000 Oldsmobile Bravada AWD smart track. To replace one spark plug I had to collapse the steering column, but everything went O.K. Did you marked the wires?. Did you reconnect them in the firing order?
The fuel pump is located In the fuel tank. Remove the fuel tank and take the fuel pump out from the top. This is part cost $300 and need some skills to be replaced.
The fuel filter it is directly in front of the fuel tank. Another one is incorporated with the fuel pump.

Sep 10, 2010 | 2000 Oldsmobile Bravada

1 Answer

2000 OLDS BRAVADA FIRING ORDER DIAGRAM , WE CHANGED PRESSURE REGULATOR, NOW TRUCK FEELS AS IF ITS MISFIRING. WE ONLY REMOVED THE 3 SPARK PLUG WIRES ON THE RIGHT SIDE OF VEHICLE, IF LOOKING FROM THE FRONT.


For the Oldsmobile Bravada 4.3L V6:

Firing Order
:
1-6-5-4-3-2

Cylinders:
......(back)......
|..6..|.......|..5..|
|..4..|.......|..3..|
|..2..|.......|..1..|
......(front)

Distributor Connections:
...........(back)
Coil-> o
6-----> o.......o <-----5
4-----> o.......o <-----1
2-----> o.......o <-----3
...........(front)

Let me now if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Apr 25, 2010 | 2000 Oldsmobile Bravada

Not finding what you are looking for?
2000 Oldsmobile Bravada Logo

Related Topics:

84 people viewed this question

Ask a Question

Usually answered in minutes!

Top Oldsmobile Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you an Oldsmobile Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...